Cisco GLC-LH-SM-RGD Full Official Product Description
1. Part Number & Naming Definition
Official Full Name
Cisco 1000BASE-LX/LH Ruggedized Industrial SFP Optical Transceiver Module with DOM Support
SKU:GLC-LH-SM-RGD
Naming Breakdown
-
GLC: Gigabit Ethernet Small Form-Factor Pluggable Transceiver
-
LH: Long-Haul, 1000BASE-LX/LH standard
-
SM: Single-Mode Fiber primary operation, also compatible with multimode fiber
-
RGD: Ruggedized industrial wide-temperature specification
Core Product Positioning
The Cisco GLC-LH-SM-RGD is a hot‑swappable ruggedized SFP transceiver compliant with IEEE 802.3z 1000BASE-LX/LH. It delivers wire-speed Gigabit Ethernet over single-mode fiber (SMF) and multimode fiber (MMF). Designed for harsh industrial environments, this rugged variant supports continuous operation across an extended industrial temperature range of -40°C to +85°C. It supports DOM/DDM real-time optical diagnostics and serves as a reliable long-distance fiber uplink solution for industrial automation, energy, transportation and outdoor networking infrastructure. A mode conditioning patch cord is required when deploying over multimode fiber.
2. Hardware & Software Compatibility
Supported Host Platforms
Cisco Catalyst IE2000, IE3300, IE3400, IE4000, IE9300 Industrial Rugged Switches; Catalyst 2960, 3650, 3850, 9200, 9300; ASR 901/903, ASR1000 Series Routers; Firepower appliances equipped with Gigabit SFP slots.
Supported IOS / IOS XE Versions
All mainstream Cisco IOS and IOS XE releases supporting SFP MSA and DOM monitoring functions.
Supported Fiber Type
Single-Mode Fiber (OS1/OS2, 9/125μm) primary; compatible with OM1/OM2 multimode fiber with mode conditioning cable
Unsupported Platforms
SFP+/SFP28/QSFP ports without adapters, legacy GBIC-only interfaces, MDS storage switches.
3. Physical & Optical Performance Specifications
Form Factor
Hot‑swappable SFP (mini‑GBIC), compliant with SFP MSA & SFF‑8472 (DOM support)
Optical Interface
-
Transmitter: 1310 nm FP Laser
-
Connector: Duplex LC
-
Data Rate: 1.25 Gbps Gigabit Ethernet
Maximum Transmission Reach
-
Single-Mode Fiber (OS1/OS2): Up to10 km
-
Multimode Fiber (OM1/OM2): Up to550 m(mode conditioning patch cord mandatory)
Optical Power Budget
-
Transmit Optical Power: -9.5 dBm ~ -3 dBm
-
Receiver Sensitivity: Minimum -21 dBm
-
Maximum Allowable Received Power: 0 dBm
Digital Diagnostics
DOM / DDM (Digital Diagnostic Monitoring) Supported
Monitors module temperature, supply voltage, laser bias current, transmit and receive optical power.
Environmental Operating Parameters (Industrial Ruggedized Grade)
-
Operating Temperature:-40°C ~ +85°C (-40°F ~ 185°F)
-
Storage Temperature: -40°C ~ +85°C (-40°F ~ 185°F)
-
Relative Humidity: 5% – 95%, non‑condensing
-
Maximum operating altitude: 3,000 meters
Typical Power Consumption
4. Supported Functional Capabilities
Ethernet Transport
Wire-speed Gigabit Ethernet full-duplex transmission, 8b/10b line coding
Layer 2 Protocol Support
802.1Q VLAN trunking, 802.3x pause frame flow control, LACP, STP/RSTP/MSTP, EtherChannel link aggregation
Interface Diagnostics
Link status detection, error counters, DOM real-time optical telemetry, local loopback testing
High Availability
OIR online insertion and removal on supported chassis; link redundancy via spanning tree or port channels
Operations & Management
IOS / IOS XE CLI, SSH, SNMP v2c/v3, Syslog logging, DOM optical parameter polling
5. Typical Deployment Scenarios
-
Industrial factory automation long-distance fiber interconnections
-
Power substation, oil & gas, railway transportation communication networks
-
Outdoor roadside, remote cabinet and unmanned site ruggedized switch uplinks
-
Harsh-temperature cabinet deployments without climate control
-
Inter-campus and metropolitan Gigabit fiber links within 10 km
-
Spare replacement transceiver for Cisco industrial and enterprise switching/routing platforms
6. Regulatory & Compliance Certifications
-
Safety Standards: UL 60950‑1, IEC/EN 60950‑1, CSA C22.2 No.60950‑1
-
EMC Compliance: CE Mark, FCC Part 15 Class A, ICES‑003 Class A
-
Laser Safety: Class 1 Laser Product per IEC 60825‑1
-
Industry Standards: IEEE 802.3z, SFP MSA, SFF‑8472
-
Environmental: RoHS compliant, WEEE directive compliant
7. Standard Factory Package Contents
-
Cisco GLC-LH-SM-RGD 1000BASE-LX/LH Ruggedized Industrial SFP Optical Transceiver
-
Hardware installation guide
-
Safety and regulatory documentation
Note: Duplex LC fiber patch cables and mode conditioning cables (for multimode deployments) are sold separately.
End-of-Sale Status
Cisco GLC-LH-SM-RGD remains active and available for new orders.
Model Comparison Reference
-
GLC-LH-SM: Commercial grade, 0°C ~ +70°C
-
GLC-LH-SMD: Extended temperature grade, -5°C ~ +85°C
-
GLC-LH-SM-RGD: Ruggedized industrial grade, -40°C ~ +85°C
UNSPSC Classification Code
43222618 – Cisco GLC-LH-SM-RGD 1000BASE-LX/LH ruggedized industrial SFP transceiver with DOM, hot‑swappable Gigabit optical module for Cisco industrial and enterprise switches and routers.
Hardware Warranty
Original Cisco units carry Cisco limited hardware warranty; refurbished units follow reseller warranty terms.
|
