Cisco SFP-10G-SR Full Official Product Description
1. Part Number & Naming Definition
Official Full Name
Cisco 10GBASE-SR SFP+ Multimode Optical Transceiver Module with Digital Optical Monitoring Support
SKU:SFP-10G-SR
Naming Breakdown
-
SFP+: Enhanced Small Form-Factor Pluggable Plus hot-swappable transceiver form factor
-
10G: 10 Gigabit Ethernet line rate
-
SR: Short Reach; 850 nm VCSEL multimode fiber operation
Core Product Positioning
The Cisco SFP-10G-SR is a hot‑swappable commercial-grade SFP+ transceiver compliant with IEEE 802.3ae 10GBASE-SR. It delivers wire-speed 10-Gigabit Ethernet transmission over multimode fiber for short-reach data center, enterprise aggregation and rack-to-rack interconnections. Built for standard climate-controlled environments, this module integrates DOM/DDM digital diagnostics for real-time optical parameter monitoring. It supports 10GbE and Fibre Channel over Ethernet (FCoE) for unified storage and data networking.
2. Hardware & Software Compatibility
Supported Host Platforms
Cisco Catalyst 3650, 3850, 4500-X, 6500, 6800, 9200, 9300 Series; Nexus 2000, 3000, 5000, 9000 Series Switches; ASR 1000, ASR 900 Series Routers; UCS Fabric Interconnects; MDS 9000 Storage Switches and Firepower appliances equipped with SFP+ ports.
Supported IOS / IOS XE / NX-OS Versions
All mainstream Cisco operating system releases supporting SFP+ MSA specification and SFF‑8472 DOM diagnostic functions.
Supported Fiber Type
Multimode Fiber (MMF) only (OM1, OM2, OM3, OM4); incompatible with single-mode fiber.
Unsupported Platforms
SFP-only Gigabit slots without SFP+ capability, QSFP ports without adapter, legacy GBIC interfaces.
3. Physical & Optical Performance Specifications
Form Factor
Hot‑swappable SFP+, compliant with SFF‑8431, SFF‑8432 & SFF‑8472 (DOM support)
Optical Interface
-
Transmitter: 850 nm VCSEL Laser
-
Connector: Duplex LC
-
Data Rate: 9.95 Gbps ~ 10.5 Gbps (10GBASE Ethernet)
Maximum Transmission Reach
-
OM1 (62.5μm MMF): Up to 26 m
-
OM2 (50μm MMF): Up to 82 m
-
OM3 laser-optimized MMF: Up to 300 m
-
OM4 laser-optimized MMF: Up to 400 m
Optical Power Budget
-
Transmit Optical Power: -6.5 dBm ~ -1 dBm
-
Receiver Sensitivity: Minimum -12.4 dBm
-
Maximum Allowable Received Power: 0.5 dBm
Digital Diagnostics
DOM / DDM (Digital Diagnostic Monitoring) Supported
Monitors module internal temperature, supply voltage, laser bias current, transmit optical power and receive optical power.
Environmental Operating Parameters (Commercial Grade)
-
Operating Temperature:0°C ~ +70°C (32°F ~ 158°F)
-
Storage Temperature: -40°C ~ +85°C (-40°F ~ 185°F)
-
Relative Humidity: 5% – 95%, non‑condensing
-
Maximum operating altitude: 3,000 meters
Typical Power Consumption
4. Supported Functional Capabilities
Ethernet Transport
Wire-speed 10 Gigabit Ethernet full-duplex transmission, 64b/66b line coding
Layer 2 Protocol Support
802.1Q VLAN trunking, 802.3x pause frame flow control, LACP, STP/RSTP/MSTP, EtherChannel link aggregation
Additional Supported Protocols
Fibre Channel over Ethernet (FCoE)
Interface Diagnostics
Link status detection, error counters, DOM real-time optical telemetry, local loopback testing
High Availability
OIR online insertion and removal on supported chassis; link redundancy via spanning tree or port channels
Operations & Management
IOS / NX-OS CLI, SSH, SNMP v2c/v3, Syslog logging, DOM optical parameter polling
5. Typical Deployment Scenarios
-
Data center top-of-rack (ToR) and end-of-row (EoR) switch interconnections
-
Short-distance rack-to-rack and intra-cabinet 10G fiber links
-
Enterprise campus building interconnections within 400 meters
-
Converged storage networking with FCoE deployments
-
Virtualization server uplinks to aggregation switches
-
Spare replacement transceiver for Cisco enterprise and data center switching/routing platforms
6. Regulatory & Compliance Certifications
-
Safety Standards: UL 60950‑1, IEC/EN 60950‑1, CSA C22.2 No.60950‑1
-
EMC Compliance: CE Mark, FCC Part 15 Class A, ICES‑003 Class A
-
Laser Safety: Class 1 Laser Product per IEC 60825‑1
-
Industry Standards: IEEE 802.3ae, SFP+ MSA SFF‑8431, SFF‑8472
-
Environmental: RoHS compliant, WEEE directive compliant
7. Standard Factory Package Contents
-
Cisco SFP-10G-SR 10GBASE-SR SFP+ Optical Transceiver
-
Hardware installation guide
-
Safety and regulatory documentation
Note: Duplex LC multimode fiber patch cables are sold separately.
End-of-Sale Status
Cisco SFP-10G-SR remains active and available for new orders.
Model Comparison Reference
-
SFP-10G-SR: Commercial grade, 0°C ~ +70°C, supports FCoE
-
SFP-10G-SR-S: S-Class variant, no FCoE support
-
SFP-10G-SR-X: Extended temperature grade, -5°C ~ +85°C
UNSPSC Classification Code
43222618 – Cisco SFP-10G-SR 10GBASE-SR commercial multimode SFP+ transceiver with DOM, hot‑swappable 10 Gigabit optical module for Cisco enterprise and data center switches and routers.
Hardware Warranty
Original Cisco units carry Cisco limited hardware warranty; refurbished units follow reseller warranty terms.
|
