Cisco SFP-10G-LR-X Full Official Product Description
1. Part Number & Naming Definition
Official Full Name
Cisco Multirate 10GBASE-LR Extended Temperature SFP+ Single-Mode Optical Transceiver Module with Digital Optical Monitoring Support
SKU:SFP-10G-LR-X
Naming Breakdown
-
SFP+: Enhanced Small Form-Factor Pluggable Plus hot-swappable transceiver form factor
-
10G: 10 Gigabit rate class
-
LR: Long Reach, 1310 nm single-mode fiber transmission
-
X: Extended operating temperature grade (-5°C ~ +85°C)
Core Product Positioning
The Cisco SFP-10G-LR-X is a hot‑swappable multirate SFP+ transceiver compliant with IEEE 802.3ae specifications. It supports 10GBASE-LR, 10GBASE-LW and OTU2/OTU2e signal rates, delivering wire-speed 10-Gigabit transmission over standard single-mode fiber. Designed for environments without strict climate control, the extended temperature profile makes it suitable for partially ventilated equipment rooms, outdoor cabinets and edge networking deployments. Built-in DOM/DDM enables continuous real-time monitoring of internal optical operating parameters.
2. Hardware & Software Compatibility
Supported Host Platforms
Cisco Catalyst 3650, 3850, 4500-X, 6500, 6800, 9200, 9300 Series; Nexus 2000, 3000, 5000, 9000 Series Switches; ASR 1000, ASR 900 Series Routers; UCS Fabric Interconnects; MDS 9000 Storage Switches and Firepower appliances equipped with SFP+ ports.
Supported IOS / IOS XE / NX-OS Versions
All mainstream Cisco operating system releases supporting SFP+ MSA specification and SFF‑8472 DOM diagnostic functions.
Supported Fiber Type
Single‑Mode Fiber (SMF) G.652 (9/125μm) only; incompatible with multimode fiber.
Unsupported Platforms
Gigabit-only SFP slots without SFP+ capability, QSFP ports without adapters, legacy GBIC interfaces.
3. Physical & Optical Performance Specifications
Form Factor
Hot‑swappable SFP+, compliant with SFF‑8431, SFF‑8432 & SFF‑8472 (DOM support)
Optical Interface
-
Transmitter: 1310 nm DFB Laser
-
Connector: Duplex LC
-
Supported Data Rates: 9.95 Gbps ~ 10.3125 Gbps (10GBASE-LR, 10GBASE-LW, OTU2/OTU2e)
Maximum Transmission Reach
-
Standard G.652 Single-Mode Fiber: Up to10 km
Optical Power Budget
-
Transmit Optical Power: -8.4 dBm ~ 0.5 dBm
-
Receiver Sensitivity: Minimum -14.4 dBm
-
Maximum Allowable Received Power: 0.5 dBm
Digital Diagnostics
DOM / DDM (Digital Diagnostic Monitoring) Supported
Monitors module internal temperature, supply voltage, laser bias current, transmit optical power and receive optical power.
Environmental Operating Parameters (Extended Temperature Grade)
-
Operating Temperature:-5°C ~ +85°C (23°F ~ 185°F)
-
Storage Temperature: -40°C ~ +85°C (-40°F ~ 185°F)
-
Relative Humidity: 5% – 95%, non‑condensing
-
Maximum operating altitude: 3,000 meters
Typical Power Consumption
4. Supported Functional Capabilities
Ethernet Transport
Wire-speed 10 Gigabit Ethernet full-duplex transmission, 64b/66b line coding
Layer 2 Protocol Support
802.1Q VLAN trunking, 802.3x pause frame flow control, LACP, STP/RSTP/MSTP, EtherChannel link aggregation
Additional Supported Protocols
10GBASE-LW, OTU2/OTU2e, Fibre Channel over Ethernet (FCoE)
Interface Diagnostics
Link status detection, error counters, DOM real-time optical telemetry, local loopback testing
High Availability
OIR online insertion and removal on supported chassis; link redundancy via spanning tree or port channels
Operations & Management
IOS / NX-OS CLI, SSH, SNMP v2c/v3, Syslog logging, DOM optical parameter polling
5. Typical Deployment Scenarios
-
Enterprise campus core and aggregation 10G single-mode uplinks
-
Data center inter-building and cross-facility point-to-point connections
-
Edge networking deployments in poorly temperature-controlled equipment rooms
-
Metro enterprise networking within 10 km transmission distance
-
Converged storage networking with FCoE deployments
-
Virtualization server farm uplinks to core switches
-
Spare replacement transceiver for Cisco enterprise and data center switching/routing platforms
6. Regulatory & Compliance Certifications
-
Safety Standards: UL 60950‑1, IEC/EN 60950‑1, CSA C22.2 No.60950‑1
-
EMC Compliance: CE Mark, FCC Part 15 Class A, ICES‑003 Class A
-
Laser Safety: Class 1 Laser Product per IEC 60825‑1
-
Industry Standards: IEEE 802.3ae, SFP+ MSA SFF‑8431, SFF‑8472
-
Environmental: RoHS compliant, WEEE directive compliant
7. Standard Factory Package Contents
-
Cisco SFP-10G-LR-X Multirate Extended Temperature SFP+ Optical Transceiver
-
Hardware installation guide
-
Safety and regulatory documentation
Note: Duplex LC single-mode fiber patch cables are sold separately.
End-of-Sale Status
Cisco SFP-10G-LR-X remains active and available for new orders.
Model Comparison Reference
-
SFP-10G-LR: Commercial grade, 0°C ~ +70°C
-
SFP-10G-LR-S: S-Class variant, commercial temperature, no FCoE support
-
SFP-10G-LR-X: Extended temperature grade, -5°C ~ +85°C, multirate with FCoE support
-
SFP-10G-LR-I: Industrial temperature grade, -40°C ~ +85°C
UNSPSC Classification Code
43222618 – Cisco SFP-10G-LR-X multirate extended-temperature single-mode SFP+ transceiver with DOM, hot‑swappable 10 Gigabit optical module for Cisco enterprise and data center switches and routers.
Hardware Warranty
Original Cisco units carry Cisco limited hardware warranty; refurbished units follow reseller warranty terms.
|
