Cisco CPAK-100G-LR4 Full Official Product Description
1. Part Number & Naming Definition
Official Full Name
Cisco 100GBASE-LR4 CPAK Hot-Swappable LAN-WDM Single-Mode Optical Transceiver Module with Digital Optical Monitoring Support
SKU:CPAK-100G-LR4
Naming Breakdown
-
CPAK: Cisco Parallel Attached Kit, proprietary hot-pluggable 100G transceiver form factor optimized for Cisco high-density 100G line cards
-
100G: Aggregate 100 Gigabit Ethernet bandwidth (4 × 25.78125 Gbps NRZ electrical lanes)
-
LR4: Long Reach four-channel LAN-WDM optical standard defined under IEEE 802.3ba 100GBASE-LR4
-
No suffix: Standard commercial temperature-grade variant (0°C ~ +70°C operating temperature)
Core Architecture
Four independent 25.78125 Gbps NRZ optical lanes operating on four fixed LAN-WDM wavelengths:
1294.53 nm ~ 1296.59 nm, 1299.02 nm ~ 1301.09 nm,
1303.54 nm ~ 1305.63 nm, 1308.09 nm ~ 1310.19 nm.
Integrated internal MUX/DEMUX combines four optical signals onto a single duplex single-mode fiber pair. Implements cooled EML transmitter array and high-sensitivity PIN photodiode receiver array.
Critical Restriction:No electrical breakout capability. Operates only as native aggregated 100G link.
Protocol Support: 100 Gigabit Ethernet, OTU4 OTN transport (platform-dependent).
Core Product Positioning
The Cisco CPAK-100G-LR4 is a commercial-grade hot‑swappable CPAK optical transceiver engineered for long-reach 100 Gigabit Ethernet interconnections over single-mode fiber. It enables high-density 100G uplinks for large enterprise data center fabrics, inter-data-center connections, campus backbone transport, and service provider metro aggregation. Compared with legacy CFP/CFP2 transceivers, CPAK delivers higher port density, smaller footprint and lower power consumption. Built-in DOM enables continuous real-time monitoring of optical operating parameters to simplify routine maintenance and accelerate fault troubleshooting.
2. Hardware & Software Compatibility
Supported Host Platforms
Cisco Nexus 7000 / Nexus 7700 Series switches with F3-series 100G line cards (N7K-F306CK-25);
ASR 9000, ASR 1000, CRS-X, NCS 2000/4000/6000 Series routers and transport platforms.
Verify Cisco official transceiver compatibility matrix and minimum required firmware release prior to deployment.
Supported Operating Systems
NX-OS, IOS-XR releases supporting CPAK transceiver recognition, DOM monitoring and 100GBASE-LR4 interface operation.
Supported Fiber Media
Single‑Mode Fiber (SMF) G.652 (OS2, 9/125μm) only; incompatible with multi-mode fiber.
Connector Type
Duplex SC/UPC optical connector (LC adapter optional for field migration)
3. Physical & Optical Performance Specifications
Form Factor
Hot‑swappable proprietary CPAK form factor
Dimensions: 11.6 × 34.8 × 101.2 mm
Optical Interface
-
LAN-WDM Wavelength Grid: 1295 nm / 1300 nm / 1305 nm / 1310 nm nominal
-
Electrical Interface: 4 × 25.78125 Gbps NRZ
-
Modulation Scheme: NRZ
-
Transmitter: Cooled EML array; Receiver: PIN photodiode array
-
Operating Mode: Native 100G only; breakout function disabled
Maximum Transmission Distance
-
Up to10 kmover standard G.652 OS2 single-mode fiber
Optical Power Budget (Per Lane)
-
Average Transmit Optical Power: −4.3 dBm ~ +4.5 dBm
-
Minimum Receiver Sensitivity: −10.6 dBm
-
Maximum Allowable Received Optical Power: +4.5 dBm
Digital Diagnostics
DOM / Digital Optical Monitoring Supported (SFF-8472)
Monitors internal module temperature, supply voltage, laser bias current, transmit optical power and received optical power.
Environmental Specifications (Commercial Grade)
-
Operating Temperature:0°C ~ +70°C (32°F ~ 158°F)
-
Storage Temperature: −40°C ~ +85°C (−40°F ~ 185°F)
-
Relative Humidity: 5% – 95%, non‑condensing
-
Maximum Operating Altitude: 3,000 meters
Typical Power Consumption
4. Supported Functional Capabilities
Ethernet Transport
Wire-speed full-duplex 100GBASE-LR4 NRZ Ethernet; supports OTN OTU4 mapping on applicable routing platforms; no electrical breakout capability.
Layer 2 Protocol Support
802.1Q VLAN trunking, IEEE 802.3x pause frame flow control, LACP, STP/RSTP/MSTP, EtherChannel link aggregation
Interface Diagnostics
Link status detection, error statistics, DOM real-time optical telemetry, LOS (Loss of Signal) alarm indication, Tx disable control, local loopback testing
High Availability
Supports hot-plug OIR (Online Insertion and Removal) on compatible Nexus and ASR platforms; supports link redundancy via port-channels and spanning tree protocols
Operations & Management
NX-OS / IOS-XR command-line interface, SSH, SNMP v2c/v3, Syslog logging
5. Typical Deployment Scenarios
-
Long-distance 100GE leaf-spine fabric uplinks spanning up to 10 km within large data center campuses
-
Intra-campus data center interconnect (DCI) over existing OS2 single-mode fiber infrastructure
-
Enterprise core backbone aggregation links for multi-building campus networks
-
Service provider metro aggregation, mobile backhaul and OTN transport deployments
-
High-density 100G port deployments on Nexus 7000/7700 F3 switching platforms
6. Regulatory & Compliance Certifications
-
Safety Standards: UL 60950‑1, IEC/EN 60950‑1, CSA C22.2 No.60950‑1
-
EMC Compliance: CE Mark, FCC Part 15 Class A, ICES‑003 Class A
-
Laser Safety: Class 1 Laser Product conforming to IEC 60825‑1
-
Industry Standards: IEEE 802.3ba, CPAK MSA specification, SFF‑8472 DOM standard
-
Environmental Regulation: RoHS compliant, WEEE directive compliant
7. Standard Factory Package Contents
-
Cisco CPAK-100G-LR4 CPAK Optical Transceiver
-
Hardware Installation Guide
-
Safety and Regulatory Documentation
Duplex SC single-mode patch cords sold separately. Cannot be electrically split into independent 25G channels.
Model Comparison Reference
-
CPAK-100G-LR4: CPAK Duplex SC LAN-WDM SMF, max 10km, native 100G only
-
CPAK-100G-SR4: CPAK MPO‑12 UPC parallel multi-mode, max 100m (OM4), short-reach rack links
-
CPAK-100G-CWDM4: CPAK duplex LC CWDM medium-reach single-mode module
-
CPAK-100G-PSM4: CPAK MPO‑12 APC parallel single-mode, 500m reach
-
QSFP-100G-LR4-S: QSFP28 form factor LR4 transceiver with different hardware footprint
UNSPSC Classification Code
43222618 – Cisco CPAK-100G-LR4 long-reach LAN-WDM single-mode CPAK transceiver with DOM, hot-swappable 100 Gigabit optical module for enterprise, cloud, and service provider 100G DCI, campus backbone and metro transport networking on Nexus 7000/7700 and ASR9000 platforms.
Hardware Warranty
Genuine Cisco transceivers are covered under Cisco limited hardware warranty. Warranty terms for refurbished units follow respective reseller agreements.
|
