Cisco PWR-C6-125WAC/2 Full English Official Product Description
Product Overview
The Cisco PWR-C6-125WAC/2 is a hot-swappable Config 6 125W secondary AC power supply module engineered for Cisco Catalyst 9200 and Catalyst 9200L Series non-PoE access switches. It features identical electrical hardware specifications to PWR-C6-125WAC and is designated as the secondary redundant power unit to be installed in the vacant power bay for N+1 redundant power configurations. This module provides stable power for switch basic data forwarding functions and enhances network availability by supporting automatic power failover.
Core Technical Specifications
-
Rated Output Power: 125 Watts (12VDC @10.5A)
-
AC Input: Auto-ranging 100–240 VAC, 50/60 Hz
-
Input Connector: IEC C14 power inlet
-
Form Factor: Config 6 hot-pluggable internal power supply
-
Built-in variable-speed cooling fan for intelligent thermal control
-
Front panel LED indicators for normal operation, power presence and fault alarm
-
High-efficiency power conversion design for low heat generation
-
Supports real-time power status monitoring and reporting via Cisco IOS XE
Hardware Compatibility
Compatible with all Catalyst 9200 and Catalyst 9200L non-PoE switch models including C9200-24T, C9200-48T and corresponding 9200L T-series variants. It can be deployed together with PWR-C6-125WAC primary power supply inside one chassis. Mixed deployment with PWR-C5-125WAC is also supported. When redundant power is not required, PWR-C6-BLANK filler panel shall be used to cover the empty slot. This power moduledoes not support PoE-enabled switch models.
Key Features & Benefits
-
Hot-swappable capability: Allows field replacement without shutting down the switch to minimize maintenance outages.
-
Secondary redundant design: Works with primary PSU to implement power redundancy; traffic will not be interrupted if one power supply fails.
-
Standardized Config 6 mechanical dimension for easy interchangeability.
-
Optimized power capacity matching the power consumption of data-only access switches without PoE loads.
-
Compliant with Cisco enterprise hardware standards, offering stable long-term operation for campus network environments.
Typical Deployment Scenarios
Enterprise campus access layer networks, SME office wired infrastructure, remote branch non-PoE switch cabinets, IT equipment rooms requiring redundant power protection for critical access switches.
Compliance & Certification
Satisfies global safety requirements, Class A EMC and EMI standards, meets international electrical specifications for worldwide commercial enterprise deployments.
|
