|
Company Name：Kino Technology Limited
Website：www.kino86.com
Address ：Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China
Contact Person：kiki
Tel ：+8613040881925
E-mail：kiki@szkiki.com
Wechat:+8613040881925
Whatspp: +8613040881925
Teams:kiki@szkiki.com
|
|
|
| Product >> Cisco >> ALL |
| |
|
Product_Id： |
8210555716 |
ProductName： |
C9K-PWR-1500WAC |
Specification： |
|
Product Notes： |
|
Product Category： |
Cisco |
| |
|
| Product Description |
Cisco C9K-PWR-1500WAC Full English Official Product Description
Product Overview
The Cisco C9K-PWR-1500WAC is a hot-swappable Platinum-rated 1500W primary AC-input power supply module engineered exclusively for Cisco Catalyst 9500X Series high-density enterprise switches. It provides stable regulated 12VDC power to operate switching ASICs, management controllers, high-speed interface ports and internal cooling assemblies. This high-capacity power unit can work as a standalone power source or pair with a second identical PSU to implement 1+1 load-sharing redundant power architecture, eliminating single-point power failure risks for data center and core aggregation switching deployments.
Core Technical Specifications
-
Rated Maximum Output Power: 1500 Watts
-
AC Input Voltage Range: Universal 90–264 VAC, 47–63 Hz
-
Input Connector: IEC C16 power inlet
-
Output Rails: Main 12VDC rail + auxiliary standby power rail
-
Energy Efficiency: 80 PLUS Platinum certified; 92% efficiency @115VAC 50% load, 94% efficiency @230VAC 50% load
-
Airflow Direction: Front-to-back (port-side intake, rear exhaust)
-
Form Factor: Hot-pluggable field-replaceable unit (FRU) supporting OIR (Online Insertion and Removal)
-
Adaptive variable-speed cooling fan dynamically adjusted by ambient temperature and power load
-
Front panel LED indicators for power presence, normal operational status and fault alarms
-
Built-in comprehensive protection: overvoltage, overcurrent, short-circuit and overtemperature shutdown
-
Minimum output hold-up time: ≥20ms under full rated load
Hardware Compatibility
Designed for Catalyst 9500X Series fixed-form-factor high-performance switches. Supports flexible mixing configurations: dual AC, dual DC, or one AC plus one DC PSU within the same chassis. Compatible counterpart DC model: C9K-PWR-1500WDC. Vacant power bays must be fitted withPWR-C6-BLANKfiller panels to preserve proper chassis airflow, thermal balance and EMC compliance. This power supply cannot be used on standard Catalyst 9500 non-X platforms or Catalyst 9400 modular chassis. The matching redundant secondary variant is C9K-PWR-1500WAC/2.
Key Features & Benefits
-
Hot-swappable OIR capability: Enables live module replacement without shutting down the switch to reduce maintenance downtime.
-
1+1 load-sharing redundancy support, realizing seamless automatic power failover for mission-critical network services.
-
Platinum high efficiency cuts power consumption and heat generation, lowering long-term data center operational costs.
-
High 1500W power budget fully satisfies power requirements of high-density 100G/200G port configurations on Catalyst 9500X switches.
-
Standardized front-to-back airflow design consistent with Catalyst 9500X thermal architecture, simplifying uniform rack cooling layout planning.
-
Real-time power monitoring, fault logging and status reporting via Cisco IOS XE operating system.
Typical Deployment Scenarios
Enterprise campus core and aggregation layer networks, medium and large data center top-of-rack high-speed switching, carrier Ethernet aggregation nodes, financial and healthcare mission-critical IT infrastructure, Catalyst 9500X high-density 100G/200G switch deployments requiring high power availability.
Compliance & Certification
Compliant with global electrical safety standards, Class A EMC and EMI specifications, qualified for worldwide commercial enterprise and carrier-grade network deployments.
Important Note
C9K-PWR-1500WAC = primary AC power supply;
C9K-PWR-1500WAC/2 = secondary redundant AC power supply with identical hardware specifications for dual redundant configurations.
|
|
|
| Click：30 Entry Time：2026-08-02 【Print】 【Close】 |
|
|
|
|
