|
Company Name：Kino Technology Limited
Website：www.kino86.com
Address ：Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China
Contact Person：kiki
Tel ：+8613040881925
E-mail：kiki@szkiki.com
Wechat:+8613040881925
Whatspp: +8613040881925
Teams:kiki@szkiki.com
|
|
|
| Product >> Cisco >> ALL |
| |
|
Product_Id： |
8211105116 |
ProductName： |
C9K-PWR-1600WDCR/2 |
Specification： |
|
Product Notes： |
|
Product Category： |
Cisco |
| |
|
| Product Description |
Cisco C9K-PWR-1600WDCR/2 Full English Official Product Description
Product Overview
The Cisco C9K-PWR-1600WDCR/2 is a hot-swappable, front-to-back airflow 1600W secondary redundant DC-input power supply module built exclusively for Cisco Catalyst 9500 Series fixed-form-factor high-performance enterprise switches. It features identical electrical and mechanical specifications to the primary unitC9K-PWR-1600WDC-R. Installed as the secondary power unit, it establishes a 1+1 load-sharing redundant power architecture together with the primary PSU. This telecom-grade DC power module provides stable regulated 12VDC power for switching ASICs, management subsystems, high-density 25G/40G/100G interface modules and internal cooling assemblies. It supports seamless automatic power failover to eliminate single-point power failure risks for carrier, industrial and data center aggregation switching infrastructure.
Core Technical Specifications
-
Rated Maximum Output Power: 1600 Watts
-
DC Input Voltage Range: -40 VDC to -72 VDC (nominal -48 VDC telecom power)
-
Max Input Current: 40A at full rated load under -48VDC
-
DC Input Interface: Dedicated DC terminal connector for negative DC power wiring
-
Output Rails: Main 12VDC @133A + auxiliary 12VDC standby rail @3A
-
Energy Efficiency: 80 PLUS Platinum rated; typical efficiency reaches 92% at 50% load
-
Airflow Direction: Front-to-back (port-side intake, rear exhaust)
-
Form Factor: Config 4 hot-pluggable FRU supporting OIR (Online Insertion and Removal)
-
Adaptive variable-speed cooling fan dynamically controlled by ambient temperature and power load
-
Front panel LED indicators: Power presence, normal operation status and fault alarms
-
Integrated multi-layer protection: overvoltage, overcurrent, short-circuit and overtemperature shutdown
-
Minimum output hold-up time meets Catalyst 9500 system design requirements
Hardware Compatibility
Fully compatible with Catalyst 9500 series switches including C9500-32C, C9500-32QC, C9500-24Y4C, C9500-48Y4C models. It operates paired with C9K-PWR-1600WDC-R primary power supply within the same chassis. The switch chassis supports mixed deployment: dual DC, dual AC, or one AC PSU (C9K-PWR-1600WAC-R) plus one DC PSU. Cisco recommends matching identical PSU variants for redundant configurations. This power supply cannot be installed on Catalyst 9400 modular chassis or Catalyst 9500X platforms. Vacant power bays must be covered withC9K-PWR-C4-BLANKfiller panels to maintain chassis airflow, thermal balance and EMC compliance. Mixing power supplies with inconsistent airflow directions within one rack is prohibited.
Key Features & Benefits
-
Hot-swappable OIR capability: Supports live module replacement without shutting down the switch, minimizing network maintenance downtime.
-
Secondary redundant power design: Executes instant automatic power switchover upon primary PSU failure to sustain continuous network services.
-
Telecom-grade negative DC input, perfectly suited for carrier central offices, transportation and industrial sites equipped with standard -48V DC power plants.
-
Platinum high efficiency reduces power consumption and heat dissipation, lowering long-term operational costs for data centers and equipment rooms.
-
High 1600W power capacity fully satisfies power demands of high-density multi-rate port configurations on Catalyst 9500 switches.
-
Standard front-to-back airflow architecture consistent with Catalyst 9500 thermal layout, simplifying unified data center rack cooling planning.
-
Real-time power monitoring, fault logging and status reporting via Cisco IOS XE operating system.
Typical Deployment Scenarios
Carrier Ethernet aggregation nodes, industrial network facilities, enterprise campus core and aggregation layer networks, medium and large data center high-speed switching, remote equipment rooms equipped with DC telecom power, mission-critical infrastructure requiring high power availability for Catalyst 9500 high-density multi-gigabit switch platforms.
Compliance & Certification
Compliant with global electrical safety standards, NEBS specifications, Class A EMC and EMI requirements, qualified for worldwide carrier-grade and commercial enterprise network deployments.
Important Note
C9K-PWR-1600WDC-R = primary DC power supply;
C9K-PWR-1600WDCR/2 = secondary redundant DC power supply with fully identical hardware specifications for dual redundant deployments.
This is DC-input module; do not connect directly to commercial AC mains.
|
|
|
| Click：28 Entry Time：2026-08-02 【Print】 【Close】 |
|
|
|
|
