|
Company Name：Kino Technology Limited
Website：www.kino86.com
Address ：Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China
Contact Person：kiki
Tel ：+8613040881925
E-mail：kiki@szkiki.com
Wechat:+8613040881925
Whatspp: +8613040881925
Teams:kiki@szkiki.com
|
|
|
| Product >> Cisco >> ALL |
| |
|
Product_Id： |
8215304816 |
ProductName： |
NXA-PAC-650W-PE |
Specification： |
|
Product Notes： |
|
Product Category： |
Cisco |
| |
|
| Product Description |
Cisco NXA-PAC-650W-PE Full English Description
Product Overview
The Cisco NXA-PAC-650W-PE is a hot-swappable 650W AC power supply module designed for Cisco Nexus 9000 and Nexus 3000 Series data center switches. It adoptsport-side exhaust (forward airflow)design with blue housing marking, compliant with NEBS standards. This PSU delivers stable 12VDC power for leaf-spine data center switching platforms, supporting redundant deployment for high-availability enterprise and cloud data center infrastructure.
Key Features
-
650 Watt Rated Output Capacity
Provides maximum 650W continuous DC output at 12VDC. Supports 1+1 redundant power configuration and load sharing to eliminate single point of power failure for mission-critical data center networks.
-
Universal Auto-Ranging AC Input
Wide voltage input supports global data center power environments:
-
Low line: 90 VAC ~ 132 VAC
-
High line: 180 VAC ~ 264 VAC
-
Operating frequency: 47 Hz ~ 63 Hz (nominal 50/60Hz)
-
Input connector: Standard IEC C13 inlet
-
Port-Side Exhaust Airflow (Forward Airflow)
Air enters from the fabric side of the switch and exhausts out of the port side. Must be paired with matching port-side exhaust fan modules to maintain consistent chassis airflow thermal management.
-
Hot-Swap Field-Replaceable Unit (FRU)
Supports online insertion and removal. Technicians can replace faulty power modules without powering off the switch, enabling non-disruptive maintenance.
-
Real-Time Status Monitoring & Telemetry
Front panel LED indicators display AC input status and power supply operational health. Environmental data including temperature, voltage and fault alerts can be reported to the switch supervisor via the backplane.
-
Multi-Layer Hardware Protection
Built-in overvoltage protection (OVP), overcurrent protection (OCP), overtemperature protection (OTP), and short-circuit protection to protect both the power supply and host switch hardware.
-
High Energy Efficiency
High-efficiency power conversion design reduces power consumption and thermal output, lowering overall data center cooling costs.
Supported Hardware Platforms
Cisco Nexus 9000 Series:
N9K-C93108TC-EX, N9K-C93180YC-EX, N9K-C93180YC-FX, N9K-C93180YC-FX3, N9K-C93180YC-FX3S
Cisco Nexus 3000 Series:
N3K-C3264Q
Typical Application Scenarios
-
Leaf-spine architecture data center switching
-
Enterprise on-premise and cloud colocation data center networks
-
High availability Layer 2 / Layer 3 data center fabric deployments
-
ACI (Application Centric Infrastructure) networking environments
Technical Specifications
-
Form Factor: Pluggable modular FRU for Nexus fixed chassis
-
Airflow Type: Port-side exhaust (Forward Airflow, Blue Label)
-
DC Output: 12 VDC
-
Hold-up Time: Minimum 12 ms at full 650W load
-
Compliance: NEBS, UL60950-1, EN60950-1, FCC Class A, CE certified
Short Version for E-commerce Listing
Cisco NXA-PAC-650W-PE, 650W Hot-Swappable AC Power Supply Module for Cisco Nexus 9000 and Nexus 3000 Series Data Center Switches. Port-side exhaust (forward airflow) design with NEBS compliance, universal auto-ranging AC input and high-efficiency power conversion. Equipped with multi-level circuit protection and real-time LED status monitoring. Supports 1+1 power redundancy and non-disruptive hot-swap maintenance, ideal for leaf-spine and ACI data center fabric deployments
|
|
|
| Click：32 Entry Time：2026-08-02 【Print】 【Close】 |
|
|
|
|
