|
Company Name：Kino Technology Limited
Website：www.kino86.com
Address ：Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China
Contact Person：kiki
Tel ：+8613040881925
E-mail：kiki@szkiki.com
Wechat:+8613040881925
Whatspp: +8613040881925
Teams:kiki@szkiki.com
|
|
|
| Product >> Cisco >> ALL |
| |
|
Product_Id： |
8215343016 |
ProductName： |
NXA-PAC-650W-PI |
Specification： |
|
Product Notes： |
|
Product Category： |
Cisco |
| |
|
| Product Description |
Cisco NXA-PAC-650W-PI Full English Description
Product Overview
The Cisco NXA-PAC-650W-PI is a hot-swappable 650W AC power supply FRU designed for Cisco Nexus 9000 and Nexus 3000 Series fixed-form factor data center switches. This unit adoptsPort-Side Intake airflow (reverse airflow)with burgundy handle marking, NEBS-compliant and certified 80Plus Platinum high efficiency. It supplies stable 12VDC power for leaf-spine switching hardware and supports redundant deployment to guarantee high availability for enterprise, colocation and cloud data center fabric networks.
Key Features
-
650W Continuous Rated Output
Delivers maximum 650W 12VDC power output. Supports 1+1 redundant configuration and dynamic load sharing, eliminating single-point power failure for mission-critical data center infrastructure.
-
Universal Auto-Ranging AC Input
Global wide voltage input for data center power environments:
-
Low line: 90 VAC ~ 132 VAC
-
High line: 180 VAC ~ 264 VAC
-
Operating frequency: 47 Hz ~ 63 Hz (50/60 Hz nominal)
-
Input connector: Standard IEC C13 power inlet
-
Port-Side Intake Airflow (Reverse Airflow)
Air flows into the switch from port side and exhausts from fabric side.Important note: Power supplies and fan trays inside one chassis must adopt identical airflow direction; never mix PI and PE airflow modules.
-
Hot-Swap Field-Replaceable Unit (FRU)
Supports online insertion and removal. Engineers can replace faulty power modules without shutting down the host switch to achieve non-disruptive maintenance.
-
Real-Time Monitoring & Telemetry
Front-panel LED indicators display AC input status and operational health. The module reports temperature, voltage and fault alarms to the switch operating system via chassis backplane.
-
Multi-Level Hardware Protection
Built-in overvoltage protection (OVP), overcurrent protection (OCP), overtemperature protection (OTP) and short-circuit protection to safeguard the power supply and switch hardware.
-
Platinum High Efficiency
80Plus Platinum certified high-efficiency power conversion, reducing power loss and heat generation to lower data center cooling expenditure.
Supported Hardware Platforms
Cisco Nexus 9000 Series
N9K-C92160YC-X, N9K-C9236C, N9K-C92300YC, N9K-C92304QC, N9K-C93108TC-EX, N9K-C93180YC-EX, N9K-C93180YC-FX
Cisco Nexus 3000 Series
N3K-C3264Q
Typical Application Scenarios
-
Leaf-spine architecture data center switching
-
On-prem enterprise and colocation data center networks
-
ACI (Application Centric Infrastructure) fabric deployments
-
Layer 2 / Layer3 high-performance data center switching environments
Technical Specifications
-
Form Factor: RSP1 pluggable modular FRU
-
Airflow Type: Port-Side Intake (Reverse Airflow, Burgundy Label)
-
DC Output: 12 VDC
-
Minimum Hold-up Time: 12 ms under full 650W load
-
Efficiency Standard: 80Plus Platinum / Climate Savers Platinum
-
Compliance: NEBS, UL60950-1, EN60950-1, FCC Class A, CE certified
Short Version for E-commerce Listing
Cisco NXA-PAC-650W-PI, 650W Hot-Swappable AC Power Supply Module for Cisco Nexus 9000 and Nexus 3000 Series Data Center Switches. Port-side intake (reverse airflow) design with burgundy handle, NEBS compliant and 80Plus Platinum high efficiency. Equipped with universal auto-ranging AC input, multi-level circuit protection and real-time LED status monitoring. Supports 1+1 power redundancy and non-disruptive hot-swap maintenance, suitable for leaf-spine and ACI data center fabric deployments.
|
|
|
| Click：20 Entry Time：2026-08-02 【Print】 【Close】 |
|
|
|
|
