|
Company Name：Kino Technology Limited
Website：www.kino86.com
Address ：Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China
Contact Person：kiki
Tel ：+8613040881925
E-mail：kiki@szkiki.com
Wechat:+8613040881925
Whatspp: +8613040881925
Teams:kiki@szkiki.com
|
|
|
| Product >> Cisco >> ALL |
| |
|
Product_Id： |
8215441116 |
ProductName： |
NXA-PAC-750W-PE |
Specification： |
|
Product Notes： |
|
Product Category： |
Cisco |
| |
|
| Product Description |
Cisco NXA-PAC-750W-PE Full English Description
Product Overview
The Cisco NXA-PAC-750W-PE is a hot-swappable 750W AC Field-Replaceable Unit (FRU) power supply designed for Cisco Nexus 9000 FX/FX2 series fixed data center switches. It featuresPort-Side Exhaust (Forward Airflow)with blue handle marking, complying with NEBS standards. This power module provides stable 12VDC power for leaf and spine switching platforms, supporting redundant power deployment to deliver high availability for ACI fabric, enterprise and colocation data center infrastructures.
Key Features
-
750 Watt Continuous Rated Output
Delivers up to 750W 12VDC power output. Supports 1+1 redundant configuration and dynamic load sharing, eliminating single-point power failure for mission-critical data center networks.
-
Universal Auto-Ranging AC Input
Wide voltage input suitable for global data center power environments:
-
Low line: 90 VAC ~ 132 VAC
-
High line: 180 VAC ~ 264 VAC
-
Operating frequency: 47 Hz ~ 63 Hz (nominal 50/60Hz)
-
Input connector: Standard IEC C13 inlet
-
Port-Side Exhaust (Forward Airflow)
Air enters the switch from the fabric side and exhausts out of the port side.
Important Note: All power supplies and fan trays installed in the same chassis must share identical airflow direction. Do NOT mix PE (port-side exhaust) and PI (port-side intake) modules.
-
Hot-Swap FRU Design
Supports online insertion and removal. Technicians can replace defective power modules without powering down the host switch, enabling non-disruptive maintenance.
-
Real-Time Telemetry & LED Status Indication
Front panel LEDs show AC input status and operational health. The module transmits temperature, voltage and fault alarm information to the switch via chassis backplane.
-
Multi-Layer Hardware Protection
Built-in overvoltage protection (OVP), overcurrent protection (OCP), overtemperature protection (OTP) and short-circuit protection to safeguard both the power supply and switch hardware.
-
High Energy Efficiency
Optimized power conversion reduces power loss and heat generation, lowering overall data center cooling operating costs.
Supported Hardware Platforms
Cisco Nexus 9000 Series Fixed Switches
N9K-C93240YC-FX2, N9K-C9332C, N9K-C9336C-FX2
Typical Application Scenarios
-
Leaf-spine architecture data center switching
-
ACI (Application Centric Infrastructure) fabric deployments
-
Enterprise on-premise and colocation data center networks
-
High-performance Layer2 / Layer3 data center switching environments
Technical Specifications
-
Form Factor: Pluggable modular FRU for Nexus fixed chassis
-
Airflow Type: Port-Side Exhaust (Forward Airflow, Blue Label)
-
DC Output: 12 VDC
-
Compliance: NEBS, UL60950-1, EN60950-1, FCC Class A, CE certified
Short Version for E-commerce Listing
Cisco NXA-PAC-750W-PE, 750W Hot-Swappable AC Power Supply Module for Cisco Nexus 9000 FX/FX2 Series Data Center Switches. Port-side exhaust (forward airflow) model with blue handle and NEBS compliance. Equipped with universal auto-ranging AC input, multi-level circuit protection and real-time LED status monitoring. Supports 1+1 power redundancy and non-disruptive hot-swap maintenance, suitable for leaf-spine and ACI data center fabric deployments.
|
|
|
| Click：27 Entry Time：2026-08-02 【Print】 【Close】 |
|
|
|
|
