Homepage | Collection | 繁体中文
Product
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
H3C
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
Contact Us


Company Name:Kino Technology Limited

Website:www.kino86.com

Address :Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China



Contact Person:kiki

Tel :+8613040881925 

E-mail:kiki@szkiki.com

Wechat:+8613040881925

Whatspp: +8613040881925

Teams:kiki@szkiki.com





Products
 Product >> Cisco >> ALL
 
Product_Id:
8215571516
ProductName:
NXA-PAC-1100W-PI2
Specification:
Product Notes:
Product Category:
Cisco
 
   Product Description

Cisco NXA-PAC-1100W-PI2 Full English Description

Product Overview

The Cisco NXA-PAC-1100W-PI2 is a hot-swappable 1100W AC Field-Replaceable Unit (FRU) power supply module developed for Cisco Nexus 9000 FX/FX2/FX3/GX series fixed-form factor data center switches. It adoptsPort-Side Intake (Reverse Airflow)design with burgundy handle marking, delivering 80 PLUS Platinum high efficiency and complying with NEBS standards. This power module supplies stable 12VDC power for high-density 10/25/100G leaf-spine switching platforms, supporting redundant power deployment for enterprise, colocation and ACI fabric data center infrastructure.

Key Features

  1. 1100 Watt Continuous Rated Output
    Delivers up to 1100W 12VDC power output. Supports 1+1 redundant configuration and dynamic load sharing, eliminating single-point power failure risks for mission-critical data center networks.
  2. Universal Auto-Ranging AC Input
    Wide voltage input adapts to global data center power grids:
  • Low line: 90 VAC ~ 132 VAC
  • High line: 180 VAC ~ 264 VAC
  • Operating frequency: 47 Hz ~ 63 Hz (nominal 50/60Hz)
  • Input connector: Standard IEC C13 power inlet
  1. Port-Side Intake (Reverse Airflow)
    Air flows into the switch from port side and exhausts out of fabric side.
    Important Note: All power supplies and fan trays installed within one chassis must adopt identical airflow direction. Do NOT mix PI (port-side intake) and PE (port-side exhaust) modules.
  2. Hot-Swap FRU Architecture
    Supports online insertion and removal. Technicians can replace defective power modules without powering down the host switch, enabling non-disruptive hardware maintenance.
  3. Real-Time Telemetry & LED Status Indication
    Front-panel LED indicators display AC input status and operational health. The module transmits temperature, voltage and fault alarm data to the NX-OS operating system via chassis backplane.
  4. Multi-Layer Hardware Protection
    Built-in overvoltage protection (OVP), overcurrent protection (OCP), overtemperature protection (OTP) and short-circuit protection to safeguard both the power supply and host switch hardware.
  5. 80 PLUS Platinum High Efficiency
    High-efficiency power conversion reduces power loss and thermal output, lowering overall cooling costs in large-scale data center environments.

Supported Hardware Platforms

Cisco Nexus 9000 Series Fixed Switches
N9K-C93180YC-FX, N9K-C93240YC-FX2, N9K-C9332C, N9K-C9336C-FX2, N9K-C9348GC-FXP, N9K-C93108TC-FX3, N9K-C93108TC-FX3P, N9K-C9300-GX Series switches

Typical Application Scenarios

  • Leaf-spine architecture data center switching
  • ACI (Application Centric Infrastructure) fabric deployments
  • Enterprise on-premise and carrier colocation data center networks
  • High-density 10/25/100G Layer2 / Layer3 data center switching environments

Technical Specifications

  • Form Factor: RSP1 pluggable modular FRU
  • Airflow Type: Port-Side Intake (Reverse Airflow, Burgundy Label)
  • DC Output: 12 VDC
  • Efficiency Standard: 80 PLUS Platinum / Climate Savers Platinum
  • Minimum Hold-up Time: 12 ms under full 1100W load
  • Compliance: NEBS, UL62368-1, EN62368-1, FCC Class A, CE certified

Short Version for E-commerce Listing

Cisco NXA-PAC-1100W-PI2, 1100W Hot-Swappable AC Power Supply Module for Cisco Nexus 9000 FX/FX2/FX3/GX Series Data Center Switches. Port-side intake (reverse airflow) model with burgundy handle, NEBS compliant and 80 PLUS Platinum high efficiency. Equipped with universal auto-ranging AC input, multi-level circuit protection and real-time LED status monitoring. Supports 1+1 power redundancy and non-disruptive hot-swap maintenance, suitable for leaf-spine and ACI data center fabric deployments.
Click:28 Entry Time:2026-08-02 【Print】 【Close

 © 2026 Kino Technology Limited. All Rights Reserved. | Hong Kong Registered · Shenzhen Operation    | Original  Brand New  & Original Brand Used Network Communication  Equipment Supplier 

Links:   Kino Technology Ltd   |  
Kino Technology Limited   网站技术支持:未来互联