|
Company Name：Kino Technology Limited
Website：www.kino86.com
Address ：Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China
Contact Person：kiki
Tel ：+8613040881925
E-mail：kiki@szkiki.com
Wechat:+8613040881925
Whatspp: +8613040881925
Teams:kiki@szkiki.com
|
|
|
| Product >> Cisco >> ALL |
| |
|
Product_Id： |
8215584916 |
ProductName： |
NXA-PAC-1200W-PE |
Specification： |
|
Product Notes： |
|
Product Category： |
Cisco |
| |
|
| Product Description |
Cisco NXA-PAC-1200W-PE Full English Description
Product Overview
The Cisco NXA-PAC-1200W-PE is a hot-swappable 1200W AC Field-Replaceable Unit (FRU) power supply module designed for Cisco Nexus 9000 FX/FX2/FX3 fixed-form factor data center switches. It featuresPort-Side Exhaust (Forward Airflow)with blue handle identification, NEBS-compliant and high-efficiency power conversion. This PSU delivers stable 12VDC power for high-density 10/25/100G leaf-spine switching platforms, supporting redundant power deployment for ACI fabric, enterprise and carrier colocation data center infrastructures.
Key Features
-
1200 Watt Continuous Rated Output
Delivers maximum 1200W 12VDC power output. Supports 1+1 redundant configuration and dynamic load sharing, eliminating single-point power failure risks for mission-critical data center networks.
-
Universal Auto-Ranging AC Input
Wide voltage input suitable for global data center power grids:
-
Low line: 90 VAC ~ 132 VAC
-
High line: 180 VAC ~ 264 VAC
-
Operating frequency: 47 Hz ~ 63 Hz (nominal 50/60Hz)
-
Input connector: Standard IEC C13 power inlet
-
Port-Side Exhaust (Forward Airflow / Back-to-Front Airflow)
Air enters the switch from fabric side and exhausts out of port side.
Important Note: All power supplies and fan trays deployed in the same chassis must adopt identical airflow direction. Do NOT mix PE (port-side exhaust) and PI (port-side intake) modules.
-
Hot-Swap FRU Architecture
Supports online insertion and removal. Technicians can replace defective power modules without powering down the host switch, enabling non-disruptive hardware maintenance.
-
Real-Time Telemetry & LED Status Indication
Front-panel LED indicators display AC input status and operational health. The module transmits temperature, voltage and fault alarm data to the NX-OS operating system via chassis backplane.
-
Multi-Layer Hardware Protection
Built-in overvoltage protection (OVP), overcurrent protection (OCP), overtemperature protection (OTP) and short-circuit protection to safeguard both the power supply and host switch hardware.
-
High Energy Efficiency
Optimized power conversion reduces power loss and thermal output, lowering overall cooling operating costs for large-scale data center environments.
Supported Hardware Platforms
Cisco Nexus 9000 Series Fixed Switches
N9K-C93180YC-FX, N9K-C93240YC-FX2, N9K-C93360YC-FX2, N9K-C9332C, N9K-C9336C-FX2, N9K-C93108TC-FX3, N9K-C93108TC-FX3P
Typical Application Scenarios
-
Leaf-spine architecture data center switching
-
ACI (Application Centric Infrastructure) fabric deployments
-
Enterprise on-premise and carrier colocation data center networks
-
High-density 10/25/100G Layer2 / Layer3 data center switching environments
Technical Specifications
-
Form Factor: RSP1 pluggable modular FRU
-
Airflow Type: Port-Side Exhaust (Forward Airflow, Blue Label)
-
DC Output: 12 VDC
-
Minimum Hold-up Time: ≥12 ms under full rated load
-
Compliance: NEBS, UL62368-1, EN62368-1, FCC Class A, CE certified
Short Version for E-commerce Listing
Cisco NXA-PAC-1200W-PE, 1200W Hot-Swappable AC Power Supply Module for Cisco Nexus 9000 FX/FX2/FX3 Series Data Center Switches. Port-side exhaust (forward airflow) model with blue handle and NEBS compliance. Equipped with universal auto-ranging AC input, multi-level circuit protection and real-time LED status monitoring. Supports 1+1 power redundancy and non-disruptive hot-swap maintenance, suitable for leaf-spine and ACI data center fabric deployments.
|
|
|
| Click：31 Entry Time：2026-08-02 【Print】 【Close】 |
|
|
|
|
