Cisco NXA-PDC-2KW-PE Full English Description

Product Overview

Important Note: This power supply does not ship with DC power cable; PWR-2KW-DC-CBL must be ordered separately.

Key Features

1. 2000 Watt Continuous Rated Output
   Delivers maximum 2000W 12VDC continuous power output plus 36W standby power. Supports 1+1 redundant configuration and dynamic load sharing, eliminating single-point power failure risks for mission-critical data center networks.
2. Telecom Negative Wide DC Input Range
   Optimized for standard telecom negative DC power infrastructure:

• Input Voltage Range: -40 VDC ~ -70 VDC (nominal -48 VDC ~ -60 VDC)
• Designed for telecom terminal connection for -48V DC power feeds

1. Port-Side Exhaust (Forward Airflow)
   Air flows into the switch from fabric side and exhausts outward from port side.
   Important Note: All power supplies and fan trays installed within one chassis must adopt identical airflow direction. Do NOT mix PE (port-side exhaust) and PI (port-side intake) modules. AC and DC power supplies cannot be mixed inside the same switch chassis.
2. Hot-Swap FRU Architecture
   Supports online insertion and removal. Technicians can replace defective power modules without shutting down the host switch, enabling non-disruptive hardware maintenance.
3. Real-Time Telemetry & LED Status Indication
   Front-panel LED indicators display DC input status and operational health. The module transmits temperature, voltage and fault alarm data to the NX-OS operating system via chassis backplane.
4. Multi-Layer Hardware Protection
   Built-in overvoltage protection (OVP), overcurrent protection (OCP), overtemperature protection (OTP) and short-circuit protection to safeguard both the power supply and host switch hardware.
5. High Power Conversion Efficiency
   Maintains ≥90% energy efficiency between 20% and 100% operating load, minimizing power loss and thermal generation to reduce cooling costs for large-scale carrier and data center facilities.

Supported Hardware Platforms

Typical Application Scenarios

• Leaf-spine architecture data center switching
• Telecom central offices and carrier POP sites equipped with -48VDC power infrastructure
• ACI (Application Centric Infrastructure) fabric deployments
• Enterprise and carrier colocation data centers utilizing DC power feeds
• High-density 10/25/100G Layer2 / Layer3 high-performance data center switching environments

Technical Specifications

• Form Factor: RSP1 pluggable modular FRU
• Airflow Type: Port-Side Exhaust (Forward Airflow, Blue Label)
• Main DC Output: 12 VDC
• Standby Output: 3.3 VDC / 36W
• Efficiency: ≥90% from 20% to 100% rated load
• Hot Swappable: Yes
• Compliance: NEBS, UL62368-1, EN62368-1, FCC Class A, CE certified, RoHS compliant

Short Version for E-commerce Listing