Cisco N7K-AC-6.0KW Full English Description

Product Overview

Key Features

1. 6000 Watt Peak Rated Output

   Maximum 6000W output when both AC inputs are connected to 200–240VAC high-line power. Output capacity reduces when using single input or 110V low-line supply. Supports N+1 and 1+1 redundant deployment with automatic dynamic load sharing to eliminate single-point power outages for mission-critical core network infrastructure.
2. Dual AC Input Power Interface

   Global wide-range alternating current input specification:

• Input Voltage: 110 VAC ~ 240 VAC
• Frequency: 50–60 Hz
• Dual independent AC power inlet for separated power source redundancy

1. Chassis Integrated Fixed Airflow Design

   Airflow direction follows the native thermal architecture of the Nexus 7000 chassis.

   Important Note: AC and DC power supply modules cannot be mixed within the same Nexus 7000 chassis. All installed power supplies must be the same model type.
2. Hot-Swap FRU Architecture

   Supports online insertion and removal. Engineers can replace faulty power modules while the core switch remains fully operational, achieving non-disruptive hardware maintenance.
3. Real-Time Telemetry & LED Status Indication

   Front panel status LEDs display power input status and operational health. The module continuously reports voltage, temperature and fault alarms to the NX-OS operating system for remote environmental monitoring.
4. Multi-Layer Hardware Protection

   Built-in overvoltage protection (OVP), overcurrent protection (OCP), overtemperature protection (OTP), and short-circuit protection to safeguard both the power supply and core switch hardware.
5. High-Efficiency Power Conversion

   80 PLUS Silver certified efficiency exceeding 90% under typical operating loads. Optimized conversion performance cuts power waste and reduces rack cooling consumption for large-scale core switching deployments.

Supported Hardware Platforms

Typical Application Scenarios

• Core layer high-density switching in enterprise leaf-spine data centers
• Carrier-grade backbone and aggregation network deployments
• Virtualized data centers and multi-tenant colocation facilities
• Large-scale 10G/40G Layer2 / Layer3 core switching environments
• Mission-critical network infrastructure requiring redundant power feed architecture

Technical Specifications

• Form Factor: Rear-mounted pluggable FRU for Nexus 7000 chassis
• Input Type: Dual independent AC inputs
• Max Rated Output: 6000W (200–240VAC dual input)
• Efficiency Standard: 80 PLUS Silver
• Hot Swappable: Yes
• Redundancy Mode: N+1, 1+1
• Compliance: UL60950-1, EN60950-1, FCC Class A, CE certified, RoHS compliant

Short Version for E-commerce Listing