Homepage | Collection | 繁体中文
Product
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
H3C
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
Contact Us


Company Name:Kino Technology Limited

Website:www.kino86.com

Address :Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China



Contact Person:kiki

Tel :+8613040881925 

E-mail:kiki@szkiki.com

Wechat:+8613040881925

Whatspp: +8613040881925

Teams:kiki@szkiki.com





Products
 Product >> Cisco >> ALL
 
Product_Id:
8310324816
ProductName:
ASR1000X-AC-750W
Specification:
Product Notes:
Product Category:
Cisco
 
   Product Description

Cisco ASR1000X-AC-750W Full English Description

Product Overview

The Cisco ASR1000X-AC-750W is a hot-swappable 750W AC Field-Replaceable Unit (FRU) power supply module designed exclusively for the Cisco ASR 1002-HX Aggregation Services Router. This high-efficiency PSU delivers stable regulated power to the route processor, embedded services processor, EPA interface adapters and all internal router subsystems. It adoptsplug-side intake (front-to-rear)airflow matching the native thermal architecture of ASR1002-HX chassis. Suitable for enterprise branch aggregation, SD-WAN edge, colocation and multiservice routing environments deployed with standard AC mains power.
image
ASR1000X-AC-750W PSU

Key Features

  1. 750 Watt Continuous Rated Output
    Delivers maximum 750W regulated output capacity. Supports 1+1 redundant power configuration with automatic dynamic load sharing to eliminate single-point power failure risks for mission-critical edge routing platforms.
  2. Universal Wide-Range Global AC Input
    Worldwide auto-ranging AC specification:
  • Input Voltage: 85 VAC ~ 264 VAC
  • Frequency: 50–60 Hz
  • Standard IEC C14 power inlet for global site deployments
  1. Plug-Side Intake (Front-to-Rear) Airflow
    Cool air enters from the power supply connector side and exhausts toward router rear ports.
    Important Note: AC and DC power supplies cannot be mixed within the same ASR1002-HX chassis. Only identical PSU models can be installed together. This model cannot be used on ASR1001-HX, ASR1002-X or other ASR1000 family routers.
  2. Hot-Swap / OIR Support
    Supports Online Insertion and Removal (OIR). Engineers can replace faulty power modules without powering off the router, enabling non-disruptive hardware maintenance and minimizing service outages.
  3. LED Status Indicators & IOS-XE Telemetry
    Faceplate OK/FAIL bi-color LEDs display input power and operational health. The module continuously reports operating voltage, internal temperature and fault conditions to the IOS-XE operating system for remote monitoring and alerting.
  4. Multi-Layer Hardware Protection
    Integrated overvoltage protection (OVP), overcurrent protection (OCP), overtemperature protection (OTP), surge protection and short-circuit protection to safeguard both the power supply and ASR1002-HX router hardware.
  5. 80 PLUS Platinum High Efficiency
    Industry-leading high power conversion efficiency reduces heat generation and power consumption, supporting reliable 24/7 continuous rack operation.

Supported Hardware Platforms

Cisco ASR 1002-HX Aggregation Services Router
Incompatible: ASR1001-HX, ASR1002-X, ASR1001-X, ASR1004, ASR1006, ASR1013 and other ASR1000 chassis variants

Typical Application Scenarios

  • Enterprise multi-service branch and SD-WAN edge routing
  • Medium-density MPLS, VPN and security service aggregation
  • Data center interconnection edge gateway deployments
  • Colocation facilities with standard universal AC power distribution
  • Mission-critical WAN infrastructure requiring redundant AC power feeds

Technical Specifications

  • Form Factor: Horizontal pluggable FRU for ASR1002-HX 2RU chassis
  • Input Type: Single universal wide-range AC input
  • Rated Continuous Output: 750W
  • Hot Swappable (OIR): Yes
  • Redundancy Mode: 1+1
  • Airflow Direction: Plug-side intake (Front-to-Rear)
  • Efficiency Certification: 80 PLUS Platinum
  • Compliance: UL60950-1, EN60950-1, FCC Class A, CE certified, RoHS compliant

Short Version for E-commerce Listing

Cisco ASR1000X-AC-750W, 750W Hot-Swappable AC Power Supply Module for Cisco ASR 1002-HX Aggregation Services Router. Plug-side intake front-to-rear airflow design with 80 PLUS Platinum efficiency, supporting 85–264VAC universal AC input. Equipped with multi-layer circuit protection, LED status indicators and IOS-XE telemetry monitoring. Supports 1+1 power redundancy and OIR non-disruptive hot-swap maintenance, ideal for enterprise SD-WAN and multiservice WAN edge deployments.
Click:27 Entry Time:2026-08-03 【Print】 【Close

 © 2026 Kino Technology Limited. All Rights Reserved. | Hong Kong Registered · Shenzhen Operation    | Original  Brand New  & Original Brand Used Network Communication  Equipment Supplier 

Links:   Kino Technology Ltd   |  
Kino Technology Limited   网站技术支持:未来互联