Homepage | Collection | 繁体中文
Product
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
H3C
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
Contact Us


Company Name:Kino Technology Limited

Website:www.kino86.com

Address :Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China



Contact Person:kiki

Tel :+8613040881925 

E-mail:kiki@szkiki.com

Wechat:+8613040881925

Whatspp: +8613040881925

Teams:kiki@szkiki.com





Products
 Product >> Cisco >> ALL
 
Product_Id:
8310343216
ProductName:
ASR1KX-AC-750W-R
Specification:
Product Notes:
Product Category:
Cisco
 
   Product Description

Cisco ASR1KX-AC-750W-R Full English Description

Product Overview

The Cisco ASR1KX-AC-750W-R is a hot-swappable 750W AC Field-Replaceable Unit (FRU) power supply module engineered exclusively for the Cisco ASR 1001-HX Aggregation Services Router. The suffix-RrepresentsReverse Airflow (Plug-side Exhaust)design. This high-efficiency PSU supplies stable regulated power to the integrated route processor, embedded services processor, network interface modules and all internal chassis subsystems. Optimized for cold-aisle deployments where hot air exhausts toward the power inlet side, it is widely adopted for enterprise SD-WAN edge, service provider POP sites and multi-tenant colocation facilities with standard AC mains power distribution.

Key Features

  1. 750 Watt Continuous Rated Output
    Delivers maximum 750W stable regulated power capacity. Supports 1+1 redundant power deployment with automatic dynamic load sharing, eliminating single-point power failure risks for high-performance compact edge routing platforms.
  2. Universal Wide-Range Global AC Input
    Worldwide auto-ranging mains power specification:
  • Input Voltage: 85 VAC ~ 264 VAC
  • Frequency: 50–60 Hz
  • Equipped with standard IEC C14 power inlet for global deployment
  1. Plug-side Exhaust (Reverse Airflow / Rear-to-Front)
    Hot air exhausts from the power supply connector side (plug-side exhaust).
    Important Note: All power supplies and fan modules installed within one ASR 1001-HX chassismust use identical airflow direction. Do not mix plug-side intake (ASR1000X-AC-750W) and plug-side exhaust (ASR1KX-AC-750W-R) PSUs. AC and DC power supply modules cannot be mixed in the same chassis. This PSU only supports ASR1001-HX and cannot work on ASR1002-HX, ASR1001-X or other ASR1000 family routers.
  2. Hot-Swap / OIR Support
    Supports Online Insertion and Removal (OIR). Technicians can replace faulty power modules without powering off the router, achieving non-disruptive hardware maintenance and minimizing network outages.
  3. LED Status Indicators & IOS-XE Telemetry
    Front-panel bi-color OK/FAIL LEDs indicate input power status and operational health. The module continuously reports operating voltage, internal temperature and fault alarms to the IOS-XE operating system for remote monitoring and alerting.
  4. Multi-Layer Hardware Protection
    Integrated overvoltage protection (OVP), overcurrent protection (OCP), overtemperature protection (OTP), surge protection and short-circuit protection to safeguard both the power supply and ASR1001-HX router hardware.
  5. 80 PLUS Platinum High Efficiency
    Industry-leading high power conversion efficiency reduces power consumption and heat generation, supporting reliable 24/7 continuous rack-mounted operation.

Supported Hardware Platforms

Cisco ASR 1001-HX Aggregation Services Router
Incompatible: ASR1002-HX, ASR1001-X, ASR1002-X, ASR1004, ASR1006, ASR1013 and other ASR1000 series chassis variants

Typical Application Scenarios

  • Enterprise SD-WAN, MPLS and multi-service edge routing
  • Service provider compact POP site aggregation routing
  • Data center interconnection edge gateway deployments
  • Colocation environments requiring plug-side exhaust reverse airflow thermal design
  • Mission-critical WAN infrastructure requiring redundant AC power feeds

Technical Specifications

  • Form Factor: Vertical pluggable FRU for ASR1001-HX 1RU chassis
  • Input Type: Single universal wide-range AC input
  • Rated Continuous Output: 750W
  • Hot Swappable (OIR): Yes
  • Redundancy Mode: 1+1
  • Airflow Direction: Plug-side Exhaust (Reverse Airflow / Rear-to-Front)
  • Efficiency Certification: 80 PLUS Platinum
  • Compliance: UL60950-1, EN60950-1, FCC Class A, CE certified, RoHS compliant

Short Version for E-commerce Listing

Cisco ASR1KX-AC-750W-R, 750W Hot-Swappable Reverse Airflow AC Power Supply Module for Cisco ASR 1001-HX Aggregation Services Router. Plug-side exhaust (rear-to-front) airflow design with 80 PLUS Platinum efficiency, supporting 85–264VAC universal AC input. Equipped with multi-layer circuit protection, LED status indicators and IOS-XE telemetry monitoring. Supports 1+1 power redundancy and OIR non-disruptive hot-swap maintenance, ideal for SD-WAN edge and service provider POP deployments requiring reverse airflow thermal layout.
Click:24 Entry Time:2026-08-03 【Print】 【Close

 © 2026 Kino Technology Limited. All Rights Reserved. | Hong Kong Registered · Shenzhen Operation    | Original  Brand New  & Original Brand Used Network Communication  Equipment Supplier 

Links:   Kino Technology Ltd   |  
Kino Technology Limited   网站技术支持:未来互联