Cisco ASR1000X-AC-1100W Full English Description

Product Overview

Key Features

1. 1100 Watt Continuous Rated Output

   Delivers maximum 1100W regulated power output. Supports N+1 and full redundant deployment with automatic dynamic current sharing on the 12V rail, eliminating single-point power failure risks for high-density core edge routing infrastructure. Multiple PSUs can operate in parallel within the chassis.
2. Universal Wide-Range Global AC Input

   Worldwide auto-ranging mains power specification:

• Input Voltage: 90 VAC ~ 264 VAC
• Frequency: 50–60 Hz
• Standard IEC C14 filtered AC power inlet for global site deployments

1. Front-to-Rear Native Chassis Airflow

   Airflow complies with the integrated thermal design of ASR1006-X / ASR1009-X chassis.

   Important Note: AC and DC power supply modules cannot be mixed within the same chassis. All installed power supplies must be identical model type. Do not intermix power supplies with different airflow directions.
2. Hot-Swap / OIR Support

   Supports Online Insertion and Removal (OIR). Engineers can replace faulty power modules without shutting down the router, enabling non-disruptive hardware maintenance and minimizing service outages.
3. LED Status Indicators & IOS-XE Telemetry

   Faceplate bi-color OK/FAIL LEDs display input power and operational health status. The module continuously reports operating voltage, internal temperature, fan speed and fault alarms to the IOS-XE operating system for remote monitoring and alerting.
4. Multi-Layer Hardware Protection

   Integrated overvoltage protection (OVP), overcurrent protection (OCP), overtemperature protection (OTP), surge protection and short-circuit protection to safeguard both the power supply and ASR 1000-X router hardware.
5. High-Efficiency Power Conversion

   Optimized power conversion efficiency reduces power waste and heat generation, supporting reliable 24/7 continuous rack operation for carrier-grade routing platforms.

Supported Hardware Platforms

Not compatible with ASR1001-X, ASR1002-X, ASR1001-HX, ASR1002-HX and other ASR1000 series chassis variants

Typical Application Scenarios

• Service provider MPLS core and aggregation routing
• Large enterprise WAN core and data center interconnection gateways
• Carrier POP sites and multi-tenant colocation facilities
• High-density 10G/40G multiservice routing with NAT, VPN and security workloads
• Mission-critical network infrastructure requiring scalable redundant AC power architecture

Technical Specifications

• Form Factor: Horizontal pluggable FRU for ASR1006-X / ASR1009-X chassis
• Input Type: Single universal wide-range AC input
• Main Output Rail: +12VDC
• Rated Continuous Output: 1100W
• Hot Swappable (OIR): Yes
• Redundancy Mode: N+1, 1+1, multi-module parallel load sharing
• Airflow Direction: Front-to-Rear
• Compliance: UL60950-1, EN60950-1, FCC Class A, CE certified, RoHS compliant

Short Version for E-commerce Listing