Cisco FPR1K-DT-PWR-AC Full English Description

Product Overview

Important Note: This is an external brick power supply,not an internal hot-swappable FRU module. The FPR1010 chassis only accepts one external power adapter; redundant power supply configuration is unsupported. This PSU enables the native PoE+ capability of Firepower 1010.

Key Features

1. 115W Continuous Rated Power Capacity

   Sufficient power to operate the FPR1010 firewall system and supply IEEE 802.3af/at PoE+ power to connected devices. Without this official adapter, the PoE+ function of the FPR1010 will be disabled.
2. Universal Wide-Range Global AC Input

   Worldwide auto-ranging mains specification:

• Input Voltage: 100 VAC ~ 240 VAC
• Operating Frequency: 50 Hz – 60 Hz
  Standard IEC C5 power inlet for AC mains cord connection.

1. External Desktop Brick Form Factor

   Standalone external power adapter with dedicated proprietary DC output plug connecting to the rear power port of FPR1010.

   Important Note: Not compatible with FPR1010E, FPR1020, FPR1030 or rack-mount Firepower appliances. Cannot be mixed with other third-party adapters; unapproved power adapters risk hardware damage and PoE function failure.
2. Non Hot-Swap Design

   Power must be disconnected physically for replacement. Power cycling of the firewall is required during adapter replacement.
3. Integrated Hardware Protection Circuitry

   Built-in overvoltage protection (OVP), overcurrent protection (OCP), overtemperature protection (OTP), surge protection and short-circuit protection to protect both the adapter and Firepower 1010 firewall hardware.
4. Energy Efficient Design

   Compliant with global energy efficiency standards, low standby power consumption for stable 24/7 continuous operation of branch security appliances.

Supported Hardware Platforms

• Cisco Firepower 1010 NGFW (FPR1010-NGFW-K9)
• Cisco Firepower 1010 ASA Appliance (FPR1010-ASA-K9)

Not compatible: FPR1010E, FPR1020, FPR1030, Firepower 2100 / 4100 series and all other Cisco security appliances.

Typical Application Scenarios

• Small business & remote branch office next-generation firewall deployments
• Sites requiring PoE+ power for IP cameras, wireless access points connected directly to FPR1010 switch ports
• Spare replacement power supply for existing Firepower 1010 installations
• Retail, clinic and small regional site network security gateway
• Mixed workload environments running FTD or ASA firewall operating systems

Technical Specifications

• Form Factor: External desktop AC-DC power brick
• Input Type: Universal 100–240 VAC wide-range AC, 50/60 Hz
• Rated Continuous Output: 115W
• DC Connector: Proprietary barrel DC plug for FPR1010
• Hot Swappable: No
• Redundancy Support: No
• PoE Support: Enables onboard PoE+ on FPR1010
• Compliance: UL60950-1, EN60950-1, FCC Class A, CE certified, RoHS compliant

Short Version for E-commerce Listing