Cisco PWR-DT-66WAC Full English Description

Product Overview

Critical Note: This 66W adapterdoes NOT support PoE+ functionality on FPR1010E. If PoE+ power for access points or IP cameras is required, select the higher-capacityFPR1K-DT-PWR-AC (115W). The FPR1010E only supports a single external power adapter; redundant power configurations are not available.

Key Features

1. 66 Watt Continuous Rated Output

   Provides sufficient power for basic system operation of Firepower 1010E without PoE loads. PoE+ ports will be disabled automatically when powered by this adapter.
2. Universal Wide-Range Global AC Input

   Worldwide auto-ranging mains specification:

• Input Voltage: 100 VAC ~ 240 VAC
• Operating Frequency: 50 Hz – 60 Hz
• IEC C5 inlet for AC power cord connection

1. External Desktop Brick Form Factor

   Standalone external power unit with proprietary DC barrel plug connecting to the rear power socket of FPR1010E.

   Important Note: Not interchangeable with FPR1010 (non-E model). Do not mix with unapproved third-party adapters, which may cause hardware damage.
2. Non Hot-Swap Design

   Full power shutdown of the firewall is required to replace the power adapter. Online hot replacement is not supported.
3. Integrated Hardware Protection Circuitry

   Built-in overvoltage protection (OVP), overcurrent protection (OCP), overtemperature protection (OTP), surge protection and short-circuit protection to safeguard the power adapter and Firepower 1010E appliance.
4. Energy Efficient Design

   Meets international energy efficiency standards with low standby power consumption, supporting stable 24/7 continuous operation for small-site security gateways.

Supported Hardware Platforms

• Cisco Firepower 1010E NGFW Appliance (FPR1010E-NGFW-K9)
• Cisco Firepower 1010E ASA Appliance (FPR1010E-ASA-K9)

Not compatible: FPR1010, FPR1020, FPR1030, Firepower 2100 / 4100 series and other Cisco security appliances.

Typical Application Scenarios

• Small office, retail and remote branch firewall deployments without PoE requirements
• Firepower 1010E running FTD or ASA OS for basic network security
• Spare replacement power supply for existing FPR1010E installations
• Remote unmanned sites where no powered endpoints require PoE+ from the firewall

Technical Specifications

• Form Factor: External desktop AC-DC power brick
• Input Type: Universal 100–240 VAC wide-range AC, 50/60 Hz
• Rated Continuous Output: 66W
• DC Connector: Proprietary barrel plug for FPR1010E
• Hot Swappable: No
• Redundancy Support: No
• PoE Support:Disabled
• Compliance: UL60950-1, EN60950-1, FCC Class A, CE certified, RoHS compliant

Short Version for E-commerce Listing