Cisco MA-PWR-30WAC Full English Description

Product Overview

Important Note: This is an external standalone power brick,not an internal hot-swappable FRU module. Redundant power configuration is not supported on compatible devices. This adapter offersno PoE power budget.

Key Features

1. 30 Watt Continuous Rated Output

   Delivers adequate power for base operation of supported Meraki MX security gateways and MS compact switches without PoE loads.
2. Universal Wide-Range Global AC Input

   Worldwide auto-ranging mains specification:

• Input Voltage: 100 VAC ~ 240 VAC
• Operating Frequency: 50 Hz – 60 Hz
• Standard IEC C5 inlet for AC power cord connection

1. External Desktop Brick Form Factor

   Compact standalone AC-DC adapter with dedicated DC barrel plug connecting to the rear power port of compatible Meraki appliances.

   Important Note: Do not mix with unapproved third-party power adapters, which may trigger hardware faults or void warranty. Not interchangeable with higher-wattage Meraki adapters such as MA-PWR-100WAC.
2. Non Hot-Swap Design

   The host device must be fully powered down for adapter replacement. Online live replacement is unsupported.
3. Integrated Hardware Protection Circuitry

   Built-in overvoltage protection (OVP), overcurrent protection (OCP), overtemperature protection (OTP), surge protection and short-circuit protection to protect the power adapter and connected Meraki hardware.
4. Energy Efficient Design

   Low standby power consumption, complying with global energy standards, supporting stable 24/7 continuous operation for small office and remote teleworker sites.

Supported Hardware Platforms

• Meraki MX Series Security Appliances: MX64, MX64W, MX67, MX67W, MX67C
• Meraki MS Series Switch: MS120-8

Not compatible: MX68 series, MX75, MX105, rack-mount MS switches, Meraki MR access points, MX250/MX450 and all other Meraki chassis requiring internal modular power supplies.

Typical Application Scenarios

• Small office, retail and teleworker branch SD-WAN & firewall deployments
• Compact Meraki desktop switch installations without PoE requirements
• Spare replacement power supply for existing MX64/MX67/MS120-8 deployments
• Remote unmanned sites with basic networking workloads that do not require PoE

Technical Specifications

• Form Factor: External desktop AC-DC power brick
• Input Type: Universal 100–240 VAC wide-range AC, 50/60 Hz
• Rated Continuous Output: 30W
• DC Connector: Proprietary barrel plug
• Hot Swappable: No
• Redundancy Support: No
• PoE Support:No
• Monitoring: No direct PSU telemetry to Meraki Dashboard
• Compliance: UL60950-1, EN60950-1, FCC Class A, CE certified, RoHS compliant

Short Version for E-commerce Listing