Cisco C4510-E-FAN Full English Description

Product Overview

Important Note: This fan tray is chassis dedicated hardware. It cannot be interchanged with C4503-E-FAN, C4506-E-FAN or C4507-E-FAN. Individual fans inside the tray arenot field-replaceable. The entire fan tray must be replaced once any internal fan fails. Operating the switch without an installed fan tray triggers critical thermal alarms and may lead to permanent hardware overheating damage.

Key Features

1. Intelligent Variable-Speed Thermal Regulation

   The fan tray dynamically adjusts fan rotational speed based on real-time chassis temperature and network workload. It runs at low RPM under light traffic loads to reduce acoustic noise, and automatically increases airflow during high-temperature operating conditions. Real-time thermal status data is transmitted to the Cisco IOS operating system for continuous environmental monitoring.
2. Side-to-Side Airflow Architecture

   Airflow Direction: Right-side intake → Left-side exhaust when facing the chassis front panel. This native thermal layout matches Catalyst 4510R-E / 4510R+E chassis design, suitable for mainstream enterprise wiring closet rack deployments. It ensures balanced heat dissipation for PoE-enabled line cards and redundant supervisor modules.
3. OIR (Online Insertion and Removal) Support

   Technicians can replace the whole fan tray without powering off or rebooting the Catalyst 4510R-E / 4510R+E switch. Equipped with ergonomic handles and captive screws, it supports convenient installation and removal to minimize maintenance downtime for campus core and distribution networks.
4. Front Panel Visual Status LED & Remote Monitoring

   Status LED located on the front face of the fan tray provides instant local visual monitoring:

• Solid Green: All internal fans operate normally
• Solid Red: One or more internal fans stall or suffer hardware failure
  IOS records environmental event logs and sends SNMP traps to centralized monitoring systems immediately after fan faults are detected.

1. Built-In Multi-Fan Redundancy

   Ten independent fans are integrated within one tray. If a single fan fails, remaining functional fans automatically ramp up speed to maintain basic cooling capacity. Administrators should replace the fan tray promptly after any fan failure to eliminate thermal single point of failure risks.
2. Enterprise-Grade Durability

   Industrial long-life fan assembly engineered for 24/7 continuous operation in enterprise campus networks. Optimized to dissipate heat generated by multi-gigabit line cards and high-power PoE modules.

Supported Hardware Platforms

• Catalyst 4510R-E (10-slot modular chassis)
• Catalyst 4510R+E (10-slot modular chassis)

Not compatible: Catalyst 4503-E, Catalyst 4506-E, Catalyst 4507R-E / 4507R+E, Catalyst 9000 series switches, all Nexus data center switch platforms.

Typical Application Scenarios

• Enterprise campus core & distribution layer deployments built on Catalyst 4510R-E / 4510R+E modular switches
• Spare replacement cooling assembly for failed fan trays on Catalyst 4510R-E / 4510R+E chassis
• Large-scale campus networks deployed with PoE line cards generating continuous thermal loads
• Enterprise LAN infrastructure requiring non-disruptive hot-swap hardware maintenance

Technical Specifications

• Form Factor: Integrated full fan tray with ten independent fans
• Airflow Direction: Side-to-side (right intake, left exhaust facing front panel)
• Hot Swappable: Yes (OIR supported)
• Power Source: Supplied by switch chassis backplane
• Monitoring: Front status LED + IOS environmental monitoring & SNMP traps
• Operating Ambient Temperature: 0°C ~ +40°C
• Compliance: UL60950-1, EN60950-1, FCC Class A, CE certified, RoHS compliant

Short Version for E-commerce Listing