|
Company Name:Kino Technology Limited
Website:www.kino86.com
Address :Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China
Contact Person:kiki
Tel :+8613040881925
E-mail:kiki@szkiki.com
Wechat:+8613040881925
Whatspp: +8613040881925
Teams:kiki@szkiki.com
|
|
|
| Product >> Cisco >> ALL |
| |
|
Product_Id: |
8313454816 |
ProductName: |
WS-C6509-E-FAN |
Specification: |
|
Product Notes: |
|
Product Category: |
Cisco |
| |
|
| Product Description |
Cisco WS-C6509-E-FAN Full English Description
Product Overview
The Cisco WS-C6509-E-FAN is a hot-swappable integrated fan tray exclusively designed for theCisco Catalyst 6509-E modular 9-slot enhanced switch chassis. This assembly integrates nine built-in fans delivering side-to-side airflow, providing uniform cooling for supervisor engines, line cards, switch fabric modules, power supplies and all internal chassis hardware. Each Catalyst 6509-E chassis supports only one fan tray slot; a fully functional fan tray is mandatory to guarantee safe continuous equipment operation.
Important Note: This fan tray is chassis-specific hardware andcannot be interchanged with WS-C6K-9SLOT-FAN / WS-C6K-9SLOT-FAN2 for standard non-E Catalyst 6509 chassis, nor other Catalyst 6500-E series fan trays. Individual fans inside the tray are not field-replaceable; the entire tray must be replaced once any internal fan fails. Operating the chassis without a properly installed fan tray triggers critical thermal alarms and may cause permanent hardware damage caused by overheating. A minimum 2500W power supply is required to power WS-C6509-E-FAN.
Key Features
-
Intelligent Variable-Speed Thermal Regulation
The fan tray dynamically adjusts fan rotational speed based on real-time chassis internal temperature, operating altitude and network forwarding workload. It runs at low RPM under light traffic loads to reduce acoustic noise and automatically boosts airflow under high-temperature operating conditions. Real-time thermal telemetry is transmitted to Cisco IOS for continuous environmental monitoring. Maximum airflow capacity reaches846 CFMat full operating speed.
-
Side-to-Side Airflow Architecture
Airflow Direction: Right-side intake → Left-side exhaust when facing the chassis front panel. This native thermal layout matches Catalyst 6509-E mechanical design, ensuring balanced heat dissipation for redundant supervisors, multi-gigabit line cards and high-power service modules. Optimized for standard rack deployments within enterprise wiring closets and data center core aggregation rooms.
-
OIR (Online Insertion and Removal) Support
Technicians can replace the complete fan tray without powering off or rebooting the Catalyst 6509-E switch. Equipped with ergonomic front handle and captive screws for tool-free installation and removal, minimizing maintenance downtime for mission-critical campus core networks.
-
Front Panel Visual Status LED & Remote Monitoring
Status LED located on the front face of the fan tray provides instant local visual feedback:
-
Solid Green: All internal fans operate normally
-
Solid Red: One or more internal fans stall or encounter hardware faults
Cisco IOS records environmental event logs and sends SNMP traps to centralized monitoring systems immediately upon fan fault detection.
-
Built-In Multi-Fan Redundancy
Nine independent fans are integrated within one tray. If a single fan malfunctions, remaining functional fans automatically ramp up speed to sustain basic cooling capacity. Administrators should replace the fan tray promptly after detecting any fan failure to eliminate thermal single-point-of-failure risks.
-
Enterprise-Grade Durability
Industrial long-life bearing fan assembly engineered for 24/7 continuous operation in large enterprise campus core networks. Optimized to dissipate heat generated by high-density copper/SFP optical line cards, distributed forwarding modules and high-power service modules.
Supported Hardware Platforms
-
Catalyst 6509-E (9-slot enhanced modular switch chassis)
Not compatible: Standard Catalyst 6509, Catalyst 6503-E / 6506-E / 6513-E, Catalyst 4500 / 9000 series switches, all 7600 routers and Nexus data center switch platforms.
Typical Application Scenarios
-
Enterprise campus core layer deployments built on Catalyst 6509-E modular switches
-
Spare replacement cooling assembly for failed fan trays on Catalyst 6509-E chassis
-
Network environments deployed with high-power line cards generating sustained thermal loads
-
Mission-critical LAN infrastructure requiring non-disruptive hot-swap hardware maintenance
Technical Specifications
-
Form Factor: Integrated full chassis fan tray with nine independent fans
-
Airflow Direction: Side-to-side (right intake, left exhaust facing front panel)
-
Maximum Airflow: 846 CFM
-
Hot Swappable: Yes (OIR supported)
-
Power Requirement: Requires minimum 2500W chassis power supply
-
Monitoring: Front status LED + IOS environmental monitoring & SNMP traps
-
Operating Ambient Temperature: 0°C ~ +40°C
-
Compliance: UL60950-1, EN60950-1, FCC Class A, CE certified, RoHS compliant
Short Version for E-commerce Listing
Cisco WS-C6509-E-FAN hot-swappable fan tray dedicated for Catalyst 6509-E 9-slot enhanced modular switch chassis with side-to-side airflow, maximum airflow 846 CFM. Supports OIR online replacement without equipment shutdown, variable-speed thermal control and IOS environmental monitoring. Designed for large enterprise campus core network deployments.
|
|
|
| Click:33 Entry Time:2026-08-03 【Print】 【Close】 |
|
|
|
|