|
Company Name：Kino Technology Limited
Website：www.kino86.com
Address ：Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China
Contact Person：kiki
Tel ：+8613040881925
E-mail：kiki@szkiki.com
Wechat:+8613040881925
Whatspp: +8613040881925
Teams:kiki@szkiki.com
|
|
|
| Product >> Cisco >> ALL |
| |
|
Product_Id： |
8411111716 |
ProductName： |
SFP-H10GB-CU4M |
Specification： |
|
Product Notes： |
|
Product Category： |
Cisco |
| |
|
| Product Description |
Cisco SFP-H10GB-CU4M Full English Product Description
Product Overview
Cisco SFP-H10GB-CU4M is an original Cisco passive 10GBASE-CU SFP+ to SFP+ direct attach twinax copper cable with a length of 4 meters. Also referred to as a DAC (Direct Attach Copper) cable, it comes with factory pre-terminated integrated SFP+ connectors on both ends. Compliant with SFP+ MSA and IEEE 802.3ae standards, it offers an economical, low-latency interconnection alternative to optical transceivers and fiber patch cords for medium-range point-to-point connections inside data center cabinets and enterprise equipment rooms.
Key Features
-
Stable 10Gbps Full-Duplex Transmission
Supports 10GBASE-CU 10 Gigabit Ethernet and compatible Fibre Channel protocols, delivering consistent 10 Gbps bidirectional data throughput for enterprise and data center networking environments.
-
Passive Twinax Low-Power Architecture
No built-in signal amplification circuits. Typical power consumption is less than 0.1W, lowering power consumption and heat load in high-density network deployments.
-
Ultra-Low Transmission Latency
Direct copper signal transmission minimizes latency, suitable for virtualization clusters, leaf-spine data center fabrics and low-latency storage network workloads.
-
Hot-Swappable SFP+ Interface
Hot-pluggable SFP+ connectors allow technicians to install or remove the cable without powering down connected switches, routers and servers.
-
Fully Shielded Twinax Cable Construction
24/26 AWG shielded twinaxial cable suppresses EMI and RFI electromagnetic interference, maintaining reliable signal integrity in densely wired computer rooms and data centers.
-
Standard Bail Pull Latch Design
Equipped with pull-tab bail latches for convenient insertion and extraction from SFP+ ports of network devices.
Technical Specifications
-
Part Number: SFP-H10GB-CU4M
-
Cable Length: 4 m (13.12 ft)
-
Cable Type: Passive Twinax Copper, 24 AWG / 26 AWG
-
Interface: SFP+ to SFP+
-
Data Rate: 10 Gbps full-duplex
-
Standards Compliance: SFF-8431, IEEE 802.3ae 10GBASE-CU
-
Differential Impedance: 100 Ohm
-
Typical Power Consumption: ＜0.1 W
-
Commercial Operating Temperature: 0°C ~ 70°C
-
Storage Temperature: -40°C ~ 85°C
-
Outer Jacket: Black PVC
-
Environmental Compliance: RoHS-6 Lead-Free
Compatible Hardware
Cisco Catalyst 3650, 3850, 9300 Series Switches; Nexus 2000, 5000, 9000 Series Switches; ASR 1000 Series Routers; MDS Storage Switches; UCS Unified Computing Servers and other network hardware equipped with SFP+ ports supporting 10G passive DAC cables.
Application Scenarios
Designed for medium-distance intra-rack and adjacent rack interconnections in data centers and enterprise computer rooms. Typical use cases include switch stacking interlinks, 10G switch-to-server connections, leaf-spine fabric interconnections, and short-reach Storage Area Network (SAN) links.
Short Version (For Invoice / E-commerce Listing)
Cisco SFP-H10GB-CU4M, 4M 10GBASE-CU Passive SFP+ Direct Attach Twinax Copper Cable, 10Gbps full-duplex transmission, ultra-low latency and low power consumption, MSA compliant, original Cisco DAC cable for medium-distance 10 Gigabit network interconnections within and between server racks.
|
|
|
| Click：29 Entry Time：2026-08-04 【Print】 【Close】 |
|
|
|
|
