|
Company Name：Kino Technology Limited
Website：www.kino86.com
Address ：Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China
Contact Person：kiki
Tel ：+8613040881925
E-mail：kiki@szkiki.com
Wechat:+8613040881925
Whatspp: +8613040881925
Teams:kiki@szkiki.com
|
|
|
| Product >> Cisco >> ALL |
| |
|
Product_Id： |
8411174816 |
ProductName： |
SFP-H10GB-ACU7M |
Specification： |
|
Product Notes： |
|
Product Category： |
Cisco |
| |
|
| Product Description |
Cisco SFP-H10GB-ACU7M Full English Product Description
Product Overview
Cisco SFP-H10GB-ACU7M is an original Ciscoactive 10GBASE-CU SFP+ to SFP+ direct attach twinax copper cable (Active DAC)with a length of 7 meters. Equipped with integrated active signal conditioning circuitry within pre-terminated SFP+ connectors on both ends. Compliant with SFP+ MSA SFF-8461 and IEEE 802.3ae standards. Unlike passive DAC cables limited to maximum 5 meters, this active twinax cable supports longer-distance 10G interconnections, offering a cost-effective low-latency alternative to optical transceivers and fiber patch cords for intra-rack and short cross-rack point-to-point network links in data centers.
Key Features
-
Stable 10Gbps Full-Duplex Transmission
Supports 10GBASE-CU 10 Gigabit Ethernet, compatible with standard Fibre Channel protocols, delivering consistent 10 Gbps bidirectional throughput for enterprise and data center networking environments.
-
Active Signal Amplification Architecture
Built-in signal re-timers and amplifiers compensate for copper signal attenuation, enabling reliable 10G transmission up to 7 meters, exceeding the distance limitation of passive twinax DAC cables.
-
Low Latency Electrical Interconnection
Direct copper transmission maintains ultra-low signal latency, suitable for virtualization clusters, leaf-spine data center fabrics and low-latency storage networking deployments.
-
Hot-Swappable SFP+ Interface
Standard hot-pluggable SFP+ form factor allows technicians to install or remove the cable without powering down connected switches, routers and servers.
-
Fully Shielded Twinax Cable Construction
26 AWG shielded twinaxial design suppresses EMI and RFI electromagnetic interference, ensuring stable signal integrity within densely cabled data center facilities.
-
Standard Bail Pull Latch Design
Comes with pull-tab bail latches for convenient insertion and extraction from SFP+ ports on network hardware.
Technical Specifications
-
Part Number: SFP-H10GB-ACU7M
-
Cable Length: 7 m (22.97 ft)
-
Cable Type: Active Twinax Copper, 26 AWG
-
Interface: SFP+ to SFP+
-
Data Rate: 10 Gbps full-duplex
-
Standards Compliance: SFF-8461, IEEE 802.3ae 10GBASE-CU
-
Differential Impedance: 100 Ohm
-
Typical Power Consumption: ≤ 1.0 W
-
Commercial Operating Temperature: 0°C ~ 70°C
-
Storage Temperature: -40°C ~ 85°C
-
Outer Jacket: Black PVC
-
Environmental Compliance: RoHS-6 Lead-Free
Compatible Hardware
Cisco Catalyst 3650, 3850, 4500-X, 9200, 9300 Series Switches; Nexus 2000, 3000, 5000, 9000 Series Switches; ASR 1000 Series Routers; MDS Storage Switches; UCS Unified Computing Servers and other network hardware equipped with SFP+ ports supporting active 10G DAC cables.
Important Notice: This is anactive DAC cable, cannot be replaced by passive twinax cables for 7-meter links.
Application Scenarios
Designed for extended-range intra-rack and short cross-rack interconnections in data centers and enterprise computer rooms. Typical use cases include switch inter-switch uplinks, 10G switch-to-server connections, leaf-spine fabric interconnections, and medium-reach Storage Area Network (SAN) links.
Short Version (For Invoice / E-commerce Listing)
Cisco SFP-H10GB-ACU7M, 7M 10GBASE-CU Active SFP+ Direct Attach Twinax Copper Cable, built-in signal amplifier, supports 10Gbps full-duplex transmission, ultra-low latency, MSA compliant, original Cisco active DAC cable for long-distance in-rack and cross-rack 10 Gigabit network interconnections.
|
|
|
| Click：31 Entry Time：2026-08-04 【Print】 【Close】 |
|
|
|
|
