|
Company Name：Kino Technology Limited
Website：www.kino86.com
Address ：Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China
Contact Person：kiki
Tel ：+8613040881925
E-mail：kiki@szkiki.com
Wechat:+8613040881925
Whatspp: +8613040881925
Teams:kiki@szkiki.com
|
|
|
| Product >> Cisco >> ALL |
| |
|
Product_Id： |
8417145716 |
ProductName： |
QSFP-4SFP25G-AOC30M |
Specification： |
|
Product Notes： |
|
Product Category： |
Cisco |
| |
|
| Product Description |
Cisco QSFP‑4SFP25G‑AOC30M Full English Product Description
Product Overview
Cisco QSFP‑4SFP25G‑AOC30M is an original Cisco active optical breakout cable with a fixed length of 30 meters. One end is equipped with a QSFP28 connector, and the fan‑out side provides four independent SFP28 optical interfaces. Adopting VCSEL array and PIN photo‑detector over multi‑mode fiber, it complies with QSFP28 MSA SFF‑8665, SFP28 MSA SFF‑8402 and IEEE 802.3bj standards. It breaks out one 100G QSFP28 port into four independent 25G SFP28 channels for ultra‑long‑range cross‑rack interconnections in enterprise, cloud, AI and high‑performance computing data centers, eliminating copper‑caused signal attenuation and EMI interference constraints.
Key Features
-
100G Aggregated / 4×25G Full‑Duplex Optical Transmission
Supports 100GBASE‑AOC aggregated bandwidth, breaking out into four independent 25GBASE‑AOC channels. Perfect for 100G‑to‑4×25G port expansion, leaf‑spine fabric deployment, switch‑to‑switch and switch‑to‑server interconnections.
-
Active Optical AOC Architecture
Integrated VCSEL transmitters and PIN receivers on both QSFP28 and SFP28 ends. Optical transmission removes distance limits of copper DAC cables. Supports Digital Diagnostic Monitoring (DDM) over I2C bus for real‑time cable health monitoring.
-
Light‑Weight Flexible Optical Cable Design
Much lighter and more flexible than twinax copper assemblies, complying with strict minimum bend radius requirements. Optimizes airflow and simplifies cable management for high‑density rack environments.
-
Hot‑Swappable QSFP28 and SFP28 Interfaces
Standard hot‑pluggable QSFP28 host connector and four SFP28 fan‑out connectors. Technicians can insert or remove the cable without powering down connected Cisco switches, routers and servers.
-
Robust Multi‑Mode Fiber Assembly
Multi‑mode ribbon fiber construction delivers superior electromagnetic immunity, fully resistant to EMI / RFI interference and near‑end crosstalk in dense data‑center deployments.
-
Standard Pull‑Tab Latch Design
Pull‑tab latches are equipped on QSFP28 and each SFP28 connector for convenient insertion and extraction from network hardware ports.
Technical Specifications
-
Part Number: QSFP‑4SFP25G‑AOC30M
-
Cable Length: 30 m (98.43 ft)
-
Cable Type: Active Optical Breakout Assembly (AOC)
-
Interface: One QSFP28 to Four SFP28
-
Data Rate: Aggregate 100 Gbps (4 × 25.78125 Gbps full‑duplex per channel)
-
Wavelength: 850 nm VCSEL
-
Standards Compliance: SFF‑8665, SFF‑8402, IEEE 802.3bj
-
Typical Total Power Consumption: ≤ 2.2 W
-
Commercial Operating Temperature: 0°C ~ 70°C
-
Storage Temperature: ‑40°C ~ 85°C
-
Outer Jacket: LSZH
-
Environmental Compliance: RoHS‑6 Lead‑Free
Compatible Hardware
Cisco switches and routers with QSFP28 100G ports supporting breakout mode, including Cisco Nexus series, Catalyst 9000X series data‑center switches, aggregation switches, and third‑party network devices conforming to QSFP28 / SFP28 MSA specifications for 100G active optical breakout cables.
Application Scenarios
Designed for ultra‑long‑distance cross‑rack interconnections in cloud data centers, enterprise data centers, AI and HPC environments. Typical use cases include 100G‑to‑4×25G port expansion, leaf‑spine switch interconnections, switch‑to‑server links and ultra‑long‑reach Storage Area Network (SAN) connections, where EMI‑immune lightweight optical breakout interconnection is required.
Short Version (For Invoice / E‑commerce Listing)
Cisco QSFP‑4SFP25G‑AOC30M, 30M QSFP28 to 4×SFP28 Active Optical Breakout Cable, aggregate 100Gbps (4×25Gbps), 850nm VCSEL, DDM supported, EMI immune, lightweight, MSA compliant, original Cisco breakout AOC cable for ultra‑long‑range data‑center port expansion interconnections.
|
|
|
| Click：49 Entry Time：2026-08-04 【Print】 【Close】 |
|
|
|
|
