|
Company Name：Kino Technology Limited
Website：www.kino86.com
Address ：Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China
Contact Person：kiki
Tel ：+8613040881925
E-mail：kiki@szkiki.com
Wechat:+8613040881925
Whatspp: +8613040881925
Teams:kiki@szkiki.com
|
|
|
| Product >> Cisco >> ALL |
| |
|
Product_Id： |
8417235516 |
ProductName： |
CAB-USB-CONSOLE |
Specification： |
|
Product Notes： |
|
Product Category： |
Cisco |
| |
|
| Product Description |
Cisco CAB‑USB‑CONSOLE Full English Product Description
Product Overview
Cisco CAB‑USB‑CONSOLE is an original integrated USB‑to‑RJ45 rollover console cable with built‑in USB‑to‑serial chipset. It connects a standard USB Type‑A port on PC or laptop to the RJ‑45 console port of Cisco network devices, delivering out‑of‑band local CLI management access. It eliminates the requirement for legacy DB‑9 serial COM port on modern hosts, supporting initial device commissioning, fault debugging, password recovery and firmware upgrades without available IP network connectivity.
Key Features
-
Integrated USB‑to‑Serial Chip Solution: Built‑in signal conversion chip inside cable assembly, converts USB signal to RS‑232 serial over rollover RJ‑45 wiring, no extra external adapter needed.
-
USB‑A Male to RJ‑45 Male Rollover Pin‑out: USB Type‑A male plugs into host computer; RJ‑45 male connects to device RJ45 console port with Cisco standard rollover pin assignment.
-
Cross‑Platform Operating‑System Support: Compatible with Windows, macOS and Linux systems. Cisco USB console driver installation is required for Windows OS; native support for macOS and Linux.
-
Out‑of‑Band Terminal Emulation Access: Works with mainstream terminal software including PuTTY, TeraTerm, SecureCRT and HyperTerminal. Default console parameters: 9600 baud, 8 data bits, no parity, 1 stop bit. Hardware flow‑control is not supported.
-
Shielded Cable Construction: Shielded cable design mitigates EMI/RFI interference in dense server‑rack environments, guarantees stable serial communication.
-
Durable Molded Connectors: Reinforced strain‑relief at both connector ends, enhances mechanical durability under frequent plug‑and‑unplug operations.
Technical Specifications
-
Part Number: CAB‑USB‑CONSOLE=
-
Cable Length: 6 ft (approx 1.8 m)
-
Connector A: USB Type‑A Male
-
Connector B: RJ‑45 (8P8C) Male, Cisco rollover pin‑out
-
Built‑in Chip: USB‑to‑RS232 serial converter
-
Interface: USB 2.0 Full‑Speed to RS‑232 over RJ‑45
-
Supported Baud Rate: 1200 bps ~ 115200 bps
-
Operating Temperature: 0°C ~ +60°C
-
Storage Temperature: ‑40°C ~ +85°C
-
Compliance: RoHS‑6 Lead‑Free
Compatible Hardware
Applicable to Cisco network hardware equipped with RJ‑45 type console port: Catalyst 9000, 3850, 3650, 2960 series switches; ISR 4000 / 3900 / 2900 series routers; ASR series routers, Firepower firewalls and wireless controllers.
Note: This cable is for RJ‑45 console port only, cannot be used for Mini‑B USB‑style console port. Do not insert into regular Ethernet network port.
Application Scenarios
Designed for data‑center, enterprise computer‑room and lab out‑of‑band management. Typical scenarios include first‑time device setup, emergency fault troubleshooting, password recovery, IOS / IOS‑XE image restoration when network management access fails.
Short Version (For Invoice / E‑commerce Listing)
Cisco CAB‑USB‑CONSOLE, 6ft USB Type‑A Male to RJ‑45 Male integrated USB‑to‑serial rollover console cable, built‑in serial conversion chip, for out‑of‑band CLI configuration on Cisco switches, routers and firewalls with RJ45 console port, RoHS‑6 lead‑free genuine Cisco management cable.
|
|
|
| Click：46 Entry Time：2026-08-04 【Print】 【Close】 |
|
|
|
|
