Huawei S1700‑16P‑AC Full English Product Description

Huawei S1700‑16P‑AC belongs to Huawei S1700 series. It is an unmanaged plug‑and‑play Fast‑Ethernet PoE access switch. Equipped with 16×10/100BASE‑T PoE RJ45 ports, it features fan‑less silent thermal design and requires no software configuration. Once powered on, it completes automatic Layer‑2 wire‑speed forwarding and PoE power supply, providing low‑cost, reliable data and power access for small offices, retail shops and small‑scale surveillance networking environments.

16‑Port 10/100 PoE Access Interfaces: 16×10/100BASE‑T auto‑sensing RJ45 PoE ports comply with IEEE 802.3af PoE standard. All copper ports support auto‑negotiation and Auto‑MDI‑X, automatically matching link speed and cable type for true plug‑and‑play operation without manual setup.
Unmanaged Zero‑configuration Operation: Pure hardware‑based Layer‑2 wire‑speed forwarding. No web‑GUI or CLI configuration is required. Simply connect power adapter and network cables to finish deployment, reducing technical requirements for field operators.
Fan‑less Silent Hardware Design: Adopts natural convection cooling without fan assemblies, delivering noise‑free operation and eliminating potential hardware failures caused by fan wear, suitable for long‑term continuous running.
Integrated PoE Power Supply: Supplies PoE power for PoE‑enabled end‑devices, simplifying on‑site cabling for surveillance and Wi‑Fi deployment. Built‑in hardware protection against over‑current and over‑voltage safeguards connected PoE terminals.
Flexible Installation: Compact metal housing supports desktop placement or wall‑mount installation for flexible field deployment.
Energy‑saving Circuit Design: Low idle power consumption. LED indicators clearly show power status, port link status and PoE working status for quick on‑site inspection.

Technical Specifications

Part Number: S1700‑16P‑AC (S1700 series)
Ports: 16 × 10/100BASE‑T PoE RJ45 ports
Switching Capacity: 3.2 Gbps
Max Packet Forwarding Rate: 2.4 Mpps
MAC Address Table: 8K entries
Jumbo Frame: Not supported
PoE Standard: IEEE 802.3af
Total PoE Budget: 124 W
Power Supply: External AC‑DC power adapter, input 100‑240 V AC, 50‑60 Hz
Max Total Power Consumption: 132 W under full PoE load
Thermal Design: Fan‑less natural cooling, silent operation
Dimension: 320 mm × 206 mm × 43.6 mm
Operating Temperature: 0 °C ~ +45 °C
Storage Temperature: ‑40 °C ~ +70 °C
Humidity: 5%‑95% non‑condensing
Compliance: IEEE 802.3 / 802.3u; RoHS‑6 Lead‑Free

PoE‑powered terminals including IP surveillance cameras, PoE wireless access points; common Ethernet devices such as PCs and network printers; upstream routers and modems.

Note: This is an unmanaged PoE switch. It doesnotsupport web‑GUI or CLI configuration. No SFP fiber slots are available.

Application Scenarios

Small‑office access networking, SOHO home‑office, small retail stores and small‑scale video‑surveillance deployment. Typical use‑cases: powering and connecting IP cameras and PoE APs, multi‑terminal local area network expansion with plug‑and‑play deployment.

Short Version (For Invoice / E‑commerce Listing)

Huawei S1700‑16P‑AC S1700 series, unmanaged plug‑and‑play PoE Fast‑Ethernet switch, 16×10/100 PoE RJ45 ports with 124W PoE budget, fan‑less silent compact design, zero‑configuration deployment, for SOHO, small‑office and small‑surveillance wired‑access networking, RoHS‑6 lead‑free.

Links： Kino Technology Ltd |
Kino Technology Limited 网站技术支持：未来互联

Huawei S1700‑16P‑AC Full English Product Description

Product Overview

Key Features

Technical Specifications

Compatible Hardware

Application Scenarios

Short Version (For Invoice / E‑commerce Listing)


	© 2026 Kino Technology Limited. All Rights Reserved. \| Hong Kong Registered · Shenzhen Operation \| Original Brand New & Original Brand Used Network Communication Equipment Supplier