Huawei S1700‑24P‑AC Full English Product Description

Huawei S1700‑24P‑AC belongs to Huawei S1700 series. It is an unmanaged plug‑and‑play Fast‑Ethernet PoE access switch. Equipped with 24×10/100BASE‑T PoE RJ45 ports, it adopts fan‑less silent thermal design and needs no software configuration. After power‑on, it achieves automatic Layer‑2 wire‑speed forwarding and PoE power supply, delivering cost‑effective and reliable data plus power access for small offices, retail stores and small‑scale video‑surveillance networking environments.

24‑Port 10/100 PoE Access Interfaces: 24×10/100BASE‑T auto‑sensing RJ45 PoE ports comply with IEEE 802.3af PoE standard. All copper ports support auto‑negotiation and Auto‑MDI‑X, automatically matching link speed and cable type for plug‑and‑play operation without manual setup.
Unmanaged Zero‑configuration Operation: Pure hardware‑based Layer‑2 wire‑speed forwarding. No web‑GUI or CLI configuration is required. Simply connect power and network cables to complete service deployment, lowering technical requirements for field operators.
Fan‑less Silent Hardware Design: Natural convection cooling without fan assemblies, noise‑free running, eliminating potential hardware failures caused by fan wear, suitable for long‑term continuous operation.
Integrated PoE Power Supply: Supplies PoE power for PoE‑enabled end‑devices, simplifying on‑site cabling for surveillance and Wi‑Fi coverage. Built‑in over‑current and over‑voltage hardware protection safeguards connected PoE terminals.
1U Rack‑mountable Form Factor: Standard 19‑inch 1U metal housing supports rack‑mount installation or desktop placement for flexible deployment.
Energy‑saving Circuit Design: Low idle power consumption. LED indicators clearly display power status, port link status and PoE working status for quick on‑site inspection.

Technical Specifications

Part Number: S1700‑24P‑AC (S1700 series)
Ports: 24 × 10/100BASE‑T PoE RJ45 ports
Switching Capacity: 4.8 Gbps
Max Packet Forwarding Rate: 3.6 Mpps
MAC Address Table: 8K entries
Jumbo Frame: Not supported
PoE Standard: IEEE 802.3af
Total PoE Budget: 370 W
Power Supply: Built‑in AC 100‑240 V, 50‑60 Hz
Max Total Power Consumption: 395 W under full PoE load
Thermal Design: Fan‑less natural cooling, silent operation
Dimension: 442 mm × 206 mm × 43.6 mm (1U)
Operating Temperature: 0 °C ~ +45 °C
Storage Temperature: ‑40 °C ~ +70 °C
Humidity: 5%‑95% non‑condensing
Compliance: IEEE 802.3 / 802.3u; RoHS‑6 Lead‑Free

PoE‑powered terminals including IP surveillance cameras, PoE wireless access points; common Ethernet devices such as PCs and network printers; upstream routers and modems.

Note: This is an unmanaged PoE switch. It doesnotsupport web‑GUI or CLI configuration. No SFP fiber slots are available.

Application Scenarios

Small‑office access‑layer networking, SOHO home‑office, small retail stores and small‑scale video‑surveillance deployment. Typical use‑cases: powering and connecting IP cameras and PoE APs, high‑density multi‑terminal local area network expansion with plug‑and‑play deployment.

Short Version (For Invoice / E‑commerce Listing)

Huawei S1700‑24P‑AC S1700 series, unmanaged plug‑and‑play PoE Fast‑Ethernet switch, 24×10/100 PoE RJ45 ports with 370W PoE budget, fan‑less silent 1U rack‑mountable design, zero‑configuration deployment, for SOHO, small‑office and small‑surveillance high‑density wired‑access networking, RoHS‑6 lead‑free.

Links： Kino Technology Ltd |
Kino Technology Limited 网站技术支持：未来互联

Huawei S1700‑24P‑AC Full English Product Description

Product Overview

Key Features

Technical Specifications

Compatible Hardware

Application Scenarios

Short Version (For Invoice / E‑commerce Listing)


	© 2026 Kino Technology Limited. All Rights Reserved. \| Hong Kong Registered · Shenzhen Operation \| Original Brand New & Original Brand Used Network Communication Equipment Supplier