Huawei Quidway S2326TP‑SI Full English Product Description

Huawei Quidway S2326TP‑SI belongs to S2300 series entry‑level Layer‑2 access switch, running on mature VRP software platform. It offers 24×10/100BASE‑TX Fast‑Ethernet ports plus 2×Gigabit combo ports (RJ45/SFP). Featuring fan‑less silent natural convection cooling, it provides fundamental Layer‑2 switching, VLAN, QoS and multiple management functions. Standard 1U rack‑mount chassis is widely deployed for small office, branch, classroom and retail site network access scenarios.

Port Configuration: 24×10/100BASE‑TX RJ45 downlink ports; 2×Gigabit combo ports, each configurable as 10/100/1000BASE‑T copper or 100/1000BASE‑X SFP fiber uplink for flexible uplink selection.
Basic Layer‑2 Functions: Supports IEEE 802.1Q VLAN (4094 VLANs), port‑based VLAN, GVRP, port isolation, LACP link aggregation, IGMP Snooping v1/v2/v3, broadcast/multicast/unknown‑unicast storm suppression, store‑and‑forward switching mode.
Simplified QoS Capability: Supports port‑based rate limiting, four priority queues per port, SP / WRR / SP+WRR scheduling algorithms, 802.1p priority mapping for basic traffic classification.
Multiple Management Modes: Supports local CLI console, Telnet, SSHv2, Web‑based management, SNMP v1/v2/v3, RMON, HGMP v2 cluster management and stacking function for unified device maintenance.
Fan‑less Silent Hardware: Natural convection cooling without fan assemblies, noise‑free long‑term continuous operation. Service ports are equipped with surge protection to improve stability under complex power‑grid environments.
Standard 1U Form Factor: 19‑inch metal 1U chassis supports rack‑mount installation or desktop placement. SI version only supports AC power input; PoE function is not available.

Technical Specifications

Part Number: S2326TP‑SI‑AC (Quidway S2300 series)
Switching Capacity: 32 Gbps
Forwarding Performance: 6.6 Mpps
MAC Address Table: 8K entries
Ports: 24 × 10/100BASE‑TX RJ45; 2 × Gigabit Combo (10/100/1000BASE‑T / 100/1000BASE‑X SFP)
Power Supply: Built‑in AC 100‑240 V, 50‑60 Hz
Max Power Consumption: 16 W
Thermal Design: Fan‑less natural convection cooling, silent operation
Dimension: 442 mm × 220 mm × 43.6 mm (1U)
Operating Temperature: 0 °C ~ +50 °C
Humidity: 10%‑90% non‑condensing
Compliance: IEEE 802.3 / 802.3u / 802.3ab / 802.3z / 802.1Q

PCs, IP surveillance cameras, wireless access points, upstream switches & routers, Huawei SFP Gigabit optical transceivers.

Note: This is SI basic version. It doesnotsupport advanced features such as QinQ, advanced ACL, 802.1X authentication and PoE power supply. DC power supply is not supported for SI model.

Application Scenarios

Small‑office access networking, branch office, classroom, retail shop and SOHO Layer‑2 access networking.

Short Version (For Invoice / E‑commerce Listing)

Huawei Quidway S2326TP‑SI, S2300 series Layer‑2 access switch, 24×10/100BASE‑TX ports plus 2×GE combo SFP/RJ45 uplinks, fan‑less silent 1U rack‑mountable design, supports VLAN, IGMP Snooping, stack, Web/CLI/SNMP management, for small‑office and branch wired‑access networking.

Links： Kino Technology Ltd |
Kino Technology Limited 网站技术支持：未来互联

Huawei Quidway S2326TP‑SI Full English Product Description

Product Overview

Key Features

Technical Specifications

Compatible Hardware

Application Scenarios

Short Version (For Invoice / E‑commerce Listing)


	© 2026 Kino Technology Limited. All Rights Reserved. \| Hong Kong Registered · Shenzhen Operation \| Original Brand New & Original Brand Used Network Communication Equipment Supplier