Huawei S2700‑26TP‑PWR‑EI Full English Product Description

Product Overview

Key Features

1. PoE+‑capable Port Configuration: 24×10/100BASE‑TX RJ45 downlink ports support IEEE 802.3af / 802.3at PoE+, each port maximum output up to 30 W; 2×Gigabit combo ports selectable between 10/100/1000BASE‑T copper or 100/1000BASE‑X SFP fiber for flexible uplink selection. Total PoE power budget reaches 740 W under full‑load condition.
2. Enhanced Layer‑2 Protocol Suite: Supports IEEE 802.1Q VLAN (4094 VLANs), MUX VLAN, Voice VLAN, GVRP, port isolation; STP/RSTP/MSTP, Smart‑Link, RRPP ring protection; LACP link aggregation, IGMP Snooping v1/v2/v3, broadcast/multicast/unknown‑unicast storm suppression, store‑and‑forward switching mode.
3. Comprehensive Security Mechanism: Supports 802.1X port authentication, MAC‑based authentication, Portal authentication, AAA / RADIUS / HWTACACS, port‑security, DHCP Snooping, anti‑ARP‑attack, anti‑DoS protection, ACL traffic filtering, SSHv2 and HTTPS secure management access.
4. Advanced QoS Performance: 8 priority queues per port, multiple scheduling algorithms including SP / WRR / SP+WRR; supports port‑based rate‑limiting, 802.1p / DSCP priority mapping for refined traffic classification and bandwidth control.
5. iStack Stacking & Diversified O&M: iStack stacking technology to virtualize multiple physical switches into one logical device for simplified network management; supports local CLI console, Telnet, SSHv2, Web‑GUI, SNMP v1/v2/v3, RMON for daily maintenance.
6. Robust Hardware Design: Standard 19‑inch 1U rack‑mount chassis with pluggable fan modules for forced air cooling; supports AC power input; hardware surge protection for service and power ports; built‑in intelligent PoE power management to monitor and protect connected PD devices such as IP cameras and wireless APs.

Technical Specifications

• Part Number: S2700‑26TP‑PWR‑EI‑AC (Quidway S2700‑EI series)
• Switching Capacity: 32 Gbps
• Forwarding Performance: 6.6 Mpps
• MAC Address Table: 8K entries
• Ports: 24 × 10/100BASE‑TX PoE+ RJ45; 2 × Gigabit Combo (10/100/1000BASE‑T / 100/1000BASE‑X SFP)
• PoE Standard: IEEE 802.3af / 802.3at PoE+, per‑port max 30 W
• Total PoE Budget: 740 W
• Power Supply: AC 100‑240 V, 50‑60 Hz
• Max Total Power Consumption: 808 W (device 68W + PoE 740W)
• Thermal Design: Pluggable forced‑air fan modules
• Dimension: 442 mm × 420 mm × 43.6 mm (1U)
• Operating Temperature: ‑5 °C ~ +50 °C
• Humidity: 5%‑95% non‑condensing
• Compliance: IEEE 802.3 / 802.3u / 802.3ab / 802.3z / 802.1Q / 802.1X

Compatible Hardware

Note: This is EI enhanced‑version PoE+ switch, supports stacking, ACL and 802.1X authentication. DC power input is not supported for this AC model.

Application Scenarios

Short Version (For Invoice / E‑commerce Listing)