Huawei S3710‑H24P4S Full English Product Description
Product Overview
Huawei CloudEngine S3710‑H24P4S is a Layer‑3 PoE+ access switch belonging to the CloudEngine S3710‑H series, running on Huawei VRP operating system. It offers 24×10/100/1000BASE‑T Gigabit PoE+ downlink ports and 4×GE SFP uplink ports. Equipped with smart temperature‑controlled fan cooling, it supports Fast‑PoE and Perpetual‑PoE, abundant Layer‑2 features, comprehensive Layer‑3 routing, complete security controls, advanced QoS and stacking capability. The standard 1U rack‑mount switch is widely deployed for enterprise campus gigabit‑to‑desktop, branch office, wireless AP access and IP surveillance network scenarios.
Key Features
-
PoE‑capable Port Configuration
24×10/100/1000BASE‑T RJ45 ports support IEEE 802.3af / 802.3at PoE+, maximum 30 W output per port. 4×100/1000BASE‑X GE SFP ports provide high‑speed fiber uplink connectivity. Total PoE power budget reaches 370 W. Fast‑PoE and Perpetual‑PoE enhance power‑supply reliability for PoE powered devices.
-
Rich Layer‑2 Functions
Supports 4094 IEEE 802.1Q VLANs, MUX VLAN, Voice VLAN, Guest VLAN, port‑based QinQ, selective QinQ, VLAN mapping and GVRP. Implements STP/RSTP/MSTP, RRPP, Smart‑Link for ring‑network protection. Supports LACP link aggregation, IGMP Snooping v1/v2/v3, MLD Snooping, broadcast/multicast/unicast storm suppression and port isolation.
-
Complete Layer‑3 & IPv6 Dual‑Stack
Provides static routing, RIP, OSPF, IS‑IS, BGP and ECMP equal‑cost routing. Fully supports IPv4/IPv6 dual‑stack, including ND, Ping, Tracert, Telnet and multiple IPv6 tunnel technologies.
-
Comprehensive Security Mechanism
Supports 802.1X authentication, MAC‑based authentication, Portal authentication, AAA / RADIUS / HWTACACS, port security, DHCP Snooping, anti‑ARP‑attack and anti‑DoS protection. L2‑L4 ACL implements fine‑grained traffic filtering; SSHv2 and HTTPS guarantee secure device management access.
-
Advanced QoS and O&M Capabilities
8 priority queues per port, supporting SP, WRR, DRR, SP+WRR scheduling algorithms. Supports port‑based rate‑limiting, two‑rate three‑color CAR, 802.1p and DSCP remarking. Built‑in telemetry, sFlow, Ethernet OAM and NQA realize efficient service monitoring and fault diagnosis.
-
Hardware and Operation‑Maintenance
Supports hardware stacking to virtualize multiple physical switches into one logical device for simplified network management. Intelligent temperature‑adjustable fan for thermal control; service ports are equipped with surge‑protection circuits. Supports Console CLI, Web‑GUI, Telnet, SSH, SNMP v1/v2/v3, RMON, and is compatible with eSight network management system. Built‑in AC power supply; external RPS redundant power is not supported.
Technical Specifications
-
Part Number: S3710‑H24P4S
-
Switching Capacity: 520 Gbps
-
Forwarding Performance: 42 Mpps
-
MAC Address Table: 16K entries
-
Ports: 24 × 10/100/1000BASE‑T PoE+ RJ45; 4 × GE SFP
-
PoE Standard: IEEE 802.3af / 802.3at PoE+, per‑port max 30 W
-
Total PoE Budget: 370 W
-
Power Input: Built‑in AC 90‑290 V, 45‑65 Hz
-
Thermal Design: Intelligent temperature‑adjustable fan cooling
-
Dimension: 442 mm × 220 mm × 43.6 mm (1U)
-
Operating Temperature: 0 °C ~ +45 °C
-
Humidity: 5%‑95% non‑condensing
-
Compliance: IEEE 802.3 series standards
Compatible Hardware
PoE‑powered end‑devices including wireless APs, IP surveillance cameras, IP phones; PCs, workstations, network printers; upstream switches, routers and Huawei GE SFP optical transceivers.
Note: This is PoE+ Layer‑3 access switch, supports stacking, QinQ, advanced ACL and full‑feature Layer‑3 routing. RPS redundant power supply is not available for this model.
Application Scenarios
Enterprise campus gigabit‑to‑desktop access layer, branch office networks, hotel and retail sites, video‑surveillance deployment and wireless‑access networks requiring PoE remote power feeding.
Short Version (For Invoice / E‑commerce Listing)
Huawei CloudEngine S3710‑H24P4S, S3710‑H series high‑performance PoE+ Layer‑3 access switch, 24×GE PoE+ RJ45 ports with 370W PoE budget, 4×GE SFP fiber uplinks, 1U rack‑mount, intelligent fan cooling, supports stacking, QinQ, full Layer‑3 routing, IPv4/IPv6 dual‑stack and telemetry O&M, ideal for campus gigabit access, surveillance and wireless‑access networking.
|
