Huawei S5331‑H24P4S Full English Product Description

Product Overview

Key Features

1. PoE‑capable Port Configuration

   24×10/100/1000BASE‑T RJ45 downlink ports comply with IEEE 802.3af / 802.3at PoE+, maximum 30 W output per port. 4×10GE SFP+ ports provide high‑bandwidth 10‑gigabit fiber uplink connectivity. Total PoE power budget reaches 370 W. Fast‑PoE and Perpetual‑PoE enhance power‑supply reliability for PD devices such as wireless APs and IP surveillance cameras.
2. Rich Layer‑2 Functions

   Supports 4094 IEEE 802.1Q VLANs, MUX VLAN, Voice VLAN, Guest VLAN, port‑based QinQ, selective QinQ, VLAN mapping and GVRP. Implements STP/RSTP/MSTP, RRPP, Smart‑Link for millisecond‑level ring‑network protection. Supports LACP link aggregation, IGMP Snooping v1/v2/v3, MLD Snooping, broadcast/multicast/unicast storm suppression and port isolation.
3. Complete Layer‑3 & IPv6 Dual‑Stack

   Provides static routing, RIP, OSPF, IS‑IS, BGP and ECMP equal‑cost routing. Supports VXLAN network virtualization technology. Fully supports IPv4/IPv6 dual‑stack functions including ND, Ping, Tracert, Telnet and multiple IPv6 tunnel technologies for smooth IPv6 network evolution.
4. Comprehensive Security Mechanism

   Supports 802.1X authentication, MAC‑based authentication, Portal authentication, AAA / RADIUS / HWTACACS, port security, DHCP Snooping, anti‑ARP‑attack and anti‑DoS protection. L2‑L4 ACL realizes fine‑grained traffic filtering; SSHv2 and HTTPS guarantee secure device management access.
5. Advanced QoS and Intelligent O&M Capabilities

   8 priority queues per port, supporting SP, WRR, DRR, SP+WRR scheduling algorithms. Supports port‑based rate‑limiting, two‑rate three‑color CAR, 802.1p and DSCP remarking. Built‑in telemetry, iPCA, sFlow, Ethernet OAM and NQA realize efficient service monitoring and fast fault diagnosis. Supports iStack hardware stacking to virtualize multiple physical switches into one logical device for simplified network management.
6. Hardware and Operation‑Maintenance

   Intelligent temperature‑adjustable forced‑air fan cooling; service ports are equipped with surge‑protection circuits. Supports 1+1 redundant AC power supply. Standard 19‑inch 1U rack‑mountable chassis. Supports Console CLI, Web‑GUI, Telnet, SSH, SNMP v1/v2/v3, RMON, and is compatible with iMaster NCE‑Campus and eSight network management system华为.

Technical Specifications

• Part Number: S5331‑H24P4S
• Switching Capacity: 672 Gbps
• Forwarding Performance: 108 Mpps
• MAC Address Table: 32K entries
• Ports: 24 × 10/100/1000BASE‑T PoE+ RJ45; 4 × 10GE SFP+
• PoE Standard: IEEE 802.3af / 802.3at PoE+, per‑port max 30 W
• Total PoE Budget: 370 W
• Power Input: 1+1 Redundant AC 100‑240 V, 50‑60 Hz
• Thermal Design: Intelligent temperature‑adjustable fan cooling
• Dimension: 442 mm × 420 mm × 43.6 mm (1U)
• Operating Temperature: 0 °C ~ +45 °C
• Humidity: 5%‑95% non‑condensing
• Compliance: IEEE 802.3 series standards

Compatible Hardware

Note: This is PoE+ Layer‑3 access switch, supports iStack stacking, VXLAN, QinQ, advanced ACL and full‑feature Layer‑3 routing. 1+1 redundant AC power supply is supported.

Application Scenarios

Short Version (For Invoice / E‑commerce Listing)