Huawei S5332‑H48S4Q Full English Product Description

Product Overview

Key Features

1. All‑optical Port Configuration

   48×GE SFP ports deliver high‑density gigabit optical access; 4×40GE QSFP+ high‑speed uplink ports support 4×10GE breakout function for flexible uplink deployment. PoE function is not supported on this unit. It adopts hot‑swappable modular fan and power modules for convenient on‑site maintenance and replacement.
2. Rich Layer‑2 Functions

   Supports 4094 IEEE 802.1Q VLANs, MUX VLAN, Voice VLAN, Guest VLAN, port‑based QinQ, selective QinQ, VLAN mapping and GVRP. Implements STP/RSTP/MSTP, RRPP, Smart‑Link for millisecond‑level ring‑network protection. Supports LACP link aggregation, M‑LAG, IGMP Snooping v1/v2/v3, MLD Snooping, broadcast/multicast/unicast storm suppression and port isolation.
3. Complete Layer‑3 & IPv6 Dual‑Stack

   Provides static routing, RIP, OSPF, IS‑IS, BGP and ECMP equal‑cost routing. Supports VXLAN and EVPN network virtualization technology. Fully supports IPv4/IPv6 dual‑stack functions including ND, Ping, Tracert, Telnet and multiple IPv6 tunnel technologies for smooth IPv6 network evolution.
4. Comprehensive Security Mechanism

   Supports 802.1X authentication, MAC‑based authentication, Portal authentication, AAA / RADIUS / HWTACACS, port security, DHCP Snooping, anti‑ARP‑attack and anti‑DoS protection. L2‑L4 ACL realizes fine‑grained traffic filtering; SSHv2 and HTTPS guarantee secure device management access.
5. Advanced QoS and Intelligent O&M Capabilities

   8 priority queues per port, supporting SP, WRR, DRR, SP+WRR scheduling algorithms. Supports port‑based rate‑limiting, two‑rate three‑color CAR, 802.1p and DSCP remarking. Built‑in telemetry, iPCA, sFlow, Ethernet OAM and NQA realize efficient service monitoring and fast fault diagnosis. Supports iStack hardware stacking to virtualize multiple physical switches into one logical device for simplified network management.
6. Modular Hardware Design

   Hot‑swappable intelligent temperature‑adjustable fan cooling system; service ports are equipped with surge‑protection circuits. Supports 1+1 hot‑swappable redundant modular AC / DC power modules (power modules are sold separately). Standard 19‑inch 1U rack‑mountable chassis. Supports Console CLI, Web‑GUI, Telnet, SSH, SNMP v1/v2/v3, RMON, and is compatible with iMaster NCE‑Campus and eSight network management system.

Technical Specifications

• Part Number: S5332‑H48S4Q
• Switching Capacity: 1.2 Tbps
• Forwarding Performance: 396 Mpps
• MAC Address Table: 32K entries
• Ports: 48 × GE SFP; 4 × 40GE QSFP+
• Power Input: Support hot‑swappable modular AC / DC power modules (power not included by default)
• Thermal Design: Hot‑swappable intelligent temperature‑adjustable fan cooling
• Dimension: 442 mm × 420 mm × 43.6 mm (1U)
• Operating Temperature: ‑5 °C ~ +45 °C
• Humidity: 5%‑95% non‑condensing
• Compliance: IEEE 802.3 series standards

Compatible Hardware

Note: This is non‑PoE high‑density all‑optical switch. PoE power supply is not supported. Power modules need to be ordered separately. It supports iStack stacking, VXLAN, EVPN, QinQ, advanced ACL and full‑feature Layer‑3 routing.

Application Scenarios

Short Version (For Invoice / E‑commerce Listing)