Huawei S5700S‑24P‑LI‑AC Full English Product Description

Product Overview

Key Features

1. Port Configuration

   24×10/100/1000BASE‑T copper ports for gigabit desktop access; 4×GE SFP slots support GE SFP optical transceivers for flexible fiber uplink deployment. PoE function is not supported. It supports external RPS redundant power supply interface for power backup.
2. Rich Layer‑2 Functions

   Supports 4094 IEEE 802.1Q VLANs, Voice VLAN, Guest VLAN, GVRP; STP/RSTP/MSTP loop‑protection protocols; LACP link aggregation, IGMP Snooping v1/v2/v3, broadcast/multicast/unicast storm suppression and port isolation华为企业业....
3. Basic Layer‑3 & IPv6 Functions

   Supports static routing and RIP for inter‑VLAN forwarding; implements basic IPv4/IPv6 dual‑stack functions including ND, Ping, Tracert and Telnet. Advanced dynamic routing protocols such as OSPF, IS‑IS, BGP are not supported on LI lite version. Hardware stacking is not supported on this model.
4. Security Mechanism

   Supports port security, DHCP Snooping, anti‑ARP‑attack, anti‑DoS protection, simple ACL traffic filtering; SSHv2 secure management access to enhance device safety. Service ports support surge‑protection capability.
5. Simplified QoS and O&M Capabilities

   8 priority queues per port, supporting SP / WRR / SP+WRR scheduling algorithms. Supports port‑based rate‑limiting and 802.1p priority mapping. Supports Console CLI, Mini‑USB console, Web‑GUI, Telnet, SSH, SNMP v1/v2/v3, RMON and compatible with eSight network management system.
6. Hardware Design

   Intelligent temperature‑adjustable fan cooling; built‑in single fixed AC 100‑240V power supply. Standard 19‑inch 1U rack‑mountable chassis. No internal redundant power slot, supports external RPS power backup. Low power consumption design with AHM energy‑saving mode.

Technical Specifications

• Part Number: S5700S‑24P‑LI‑AC (S5700S‑28P‑LI‑AC)
• Switching Capacity: 256 Gbps
• Forwarding Performance: 42 Mpps
• MAC Address Table: 16K entries
• Ports: 24 × 10/100/1000BASE‑T RJ45; 4 × GE SFP
• Power Input: Built‑in AC 100‑240 V, 50‑60 Hz, support external RPS
• Thermal Design: Intelligent temperature‑adjustable fan cooling
• Max Power Consumption: 24 W
• Dimension: 442 mm × 220 mm × 43.6 mm (1U)
• Operating Temperature: 0 °C ~ +50 °C
• Humidity: 5%‑95% non‑condensing
• Compliance: IEEE 802.3 series standards

Compatible Hardware

Note: This is LI non‑PoE lite version. It doesnotsupport PoE power supply and hardware stacking function. Redundant power must rely on external RPS device.

Application Scenarios

Short Version (For Invoice / E‑commerce Listing)