Huawei S5730‑48P‑SI‑AC Full English Product Description

Product Overview

Key Features

1. Port and PoE Configuration

   48×10/100/1000BASE‑T PoE+ copper ports comply with IEEE 802.3at PoE+ standard, each port can supply maximum 37W power for PD devices including wireless APs, IP cameras and IP phones. 4 dedicated GE SFP slots support GE SFP transceivers for long‑distance fiber uplink transmission. Built‑in AC power input, supports external RPS redundant power supply to improve system reliability. Intelligent variable‑speed fans realize automatic temperature‑control heat dissipation and reduce operating noise.
2. Rich Layer‑2 Functions

   Supports 4094 IEEE 802.1Q VLANs, MUX VLAN, Voice VLAN, Guest VLAN, GVRP and VLAN mapping. Supports STP/RSTP/MSTP, Smart‑Link and RRPP ring‑protection protocols for millisecond‑level link fail‑over recovery. Supports LACP link aggregation, IGMP Snooping v1/v2/v3, MLD Snooping, broadcast/multicast/unicast storm suppression and port isolation. iStack hardware stacking can merge multiple physical switches into one logical device for unified management. Supports SVF super virtual fabric to simplify campus network deployment and reduce O&M workload.
3. Basic Layer‑3 & IPv6 Dual‑Stack Functions

   Supports static routing, RIP, OSPF, OSPFv3, VRRP and ECMP equal‑cost routing. Supports multicast protocols including PIM‑DM, PIM‑SM, PIM‑SSM and IGMP snooping. Complete IPv4/IPv6 dual‑stack capability covers ND, Ping, Tracert, IPv6 ACL and IPv6 QoS, meeting general multi‑service enterprise routing requirements. MAC address table supports up to 32K entries for medium‑large‑scale networking.
4. Comprehensive Security Mechanism

   Supports 802.1X authentication, MAC‑based authentication, AAA / RADIUS / HWTACACS and port security. Supports DHCP Snooping, ARP anti‑attack and anti‑DoS attack protection. L2‑L4 ACL implements flexible traffic filtering; SSHv2 and HTTPS ensure secure device management access. Service ports support surge‑protection capability for stable operation in complex office and monitoring environments.
5. Powerful QoS and O&M Capabilities

   8 priority queues per port, supporting SP / WRR / WFQ / SP+WRR queue scheduling algorithms. Supports port‑based rate‑limiting, two‑rate three‑color CAR, 802.1p / DSCP remarking. Supports Console CLI, Mini‑USB console, Web‑GUI, Telnet, SSH, SNMP v1/v2c/v3, RMON, virtual cable test, and compatible with eSight network management system. Supports EEE energy‑saving Ethernet technology for low‑power consumption operation.
6. Hardware Design

   Intelligent temperature‑adjustable forced‑air fan cooling; built‑in AC power supply, compatible with external RPS redundant power supply. Standard 19‑inch 1U rack‑mountable chassis.

Technical Specifications

• Part Number: S5730‑48P‑SI‑AC
• Switching Capacity: 336 Gbps
• Forwarding Performance: 132 Mpps
• MAC Address Table: 32K entries
• Ports: 48 × 10/100/1000BASE‑T PoE+ RJ45; 4 × GE SFP
• PoE Standard: IEEE 802.3at (PoE+), max 37W per port
• Power Input: Built‑in AC 100‑240 V, 50‑60 Hz, compatible with external RPS
• Thermal Design: Intelligent temperature‑adjustable forced fan cooling
• Max Power Consumption: 740 W (full PoE load)
• Dimension: 442 mm × 220 mm × 43.6 mm (1U)
• Operating Temperature: 0 °C ~ +45 °C
• Humidity: 5%‑95% non‑condensing
• Compliance: IEEE 802.3 series Ethernet standards

Compatible Hardware

Note: This is SI PoE+ standard‑version switch. It doesnotsupport expansion slot. It supports IEEE802.3at PoE+, iStack stacking, SVF super virtual fabric, basic Layer‑3 routing and IPv4/IPv6 dual‑stack.

Application Scenarios

Short Version (For Invoice / E‑commerce Listing)