Huawei S5730S‑E48P4S Full English Product Description

Product Overview

Key Features

1. Port & PoE Configuration

   48×10/100/1000BASE‑T PoE+ ports comply with IEEE 802.3at PoE+ standard, delivering up to 37W output power per port for PD devices such as wireless APs, IP cameras and IP phones. 4×GE SFP slots support GE or FE SFP transceivers for long‑distance fiber uplink interconnection. Built‑in AC power input supports external RPS redundant power supply to improve system reliability. Intelligent temperature‑controlled fans automatically adjust rotation speed to balance heat dissipation and noise performance.
2. Rich Layer‑2 Functions

   Supports 4094 IEEE 802.1Q VLANs, MUX VLAN, Voice VLAN, Guest VLAN, GVRP and VLAN mapping. Supports STP/RSTP/MSTP, Smart‑Link and RRPP ring‑protection protocols for millisecond‑level link fail‑over recovery. Supports LACP link aggregation, IGMP Snooping v1/v2/v3, MLD Snooping, broadcast/multicast/unicast storm suppression and port isolation. iStack hardware stacking virtualizes multiple physical switches into one logical device for unified configuration and management. SVF super virtual fabric simplifies campus network architecture and reduces deployment and maintenance workload.
3. Enhanced Layer‑3 & IPv6 Dual‑Stack Functions

   Supports static routing, RIP, OSPF, OSPFv3, VRRP and ECMP equal‑cost routing. Supports multicast protocols including PIM‑DM, PIM‑SM, PIM‑SSM. Full IPv4/IPv6 dual‑stack implementation covers ND, Ping, Tracert, IPv6 ACL and IPv6 QoS, satisfying multi‑service enterprise routing requirements. MAC address table supports up to 32K entries for medium‑large‑scale network deployment.
4. Comprehensive Security Mechanism

   Supports 802.1X authentication, MAC‑based authentication, AAA / RADIUS / HWTACACS and port security. Implements DHCP Snooping, ARP anti‑attack and anti‑DoS protection. L2‑L4 ACL provides flexible traffic filtering; SSHv2 and HTTPS guarantee secure device management access. Service ports offer surge‑protection capability for stable operation in complex office and surveillance environments.
5. Powerful QoS and O&M Capabilities

   8 priority queues per port, supporting SP / WRR / WFQ / SP+WRR queue‑scheduling algorithms. Supports port‑based rate‑limiting, two‑rate three‑color CAR, 802.1p / DSCP remarking. Supports Console CLI, Mini‑USB console, Web‑GUI, Telnet, SSH, SNMP v1/v2c/v3, RMON, virtual cable test, and compatibility with eSight network management system. Supports EEE energy‑efficient Ethernet for low‑energy‑consumption operation.
6. Hardware Design

   Intelligent temperature‑adjustable forced‑air fan cooling; built‑in AC power input, compatible with external RPS redundant power supply. Standard 19‑inch 1U rack‑mountable chassis.

Technical Specifications

• Part Number: S5730S‑E48P4S
• Switching Capacity: 336 Gbps
• Forwarding Performance: 132 Mpps
• MAC Address Table: 32K entries
• Ports: 48 × 10/100/1000BASE‑T PoE+ RJ45; 4 × GE SFP
• PoE Standard: IEEE 802.3at (PoE+), maximum 37W per port
• Power Input: Built‑in AC 100‑240 V, 50‑60 Hz, compatible with external RPS
• Thermal Design: Intelligent temperature‑adjustable forced fan cooling
• Max Power Consumption: 740 W (full PoE load)
• Dimension: 442 mm × 220 mm × 43.6 mm (1U)
• Operating Temperature: 0 °C ~ +45 °C
• Humidity: 5%‑95% non‑condensing
• Compliance: IEEE 802.3 series Ethernet standards

Compatible Hardware

Note: This is E‑level PoE+ enhanced‑version switch. It supports IEEE802.3at PoE+, iStack stacking, SVF super virtual fabric, enhanced Layer‑3 routing and full IPv4/IPv6 dual‑stack capability.

Application Scenarios

Short Version (For Invoice / E‑commerce Listing)