Huawei CloudEngine S5751‑L24P4S Full English Product Description

Product Overview

Key Features

1. Port, PoE and Hardware Configuration

   24×10/100/1000BASE‑T auto‑negotiation RJ45 ports comply with IEEE 802.3at PoE+ standard, supplying power for PD devices including Wi‑Fi‑6/7 wireless APs, IP surveillance cameras and IP phones. 4×GE SFP slots support FE/GE optical transceivers for long‑distance fiber uplink connection. Built‑in fixed AC power supply delivers total PoE budget for powering PoE terminals. Intelligent variable‑speed fan dynamically adjusts rotating speed to balance heat dissipation and acoustic noise. Service ports provide surge‑protection capability for stable operation in complex building environments. Standard 19‑inch 1U rack‑mount chassis for cabinet installation.
2. Rich Layer‑2 Functions

   Supports 4094 IEEE 802.1Q VLANs, MUX VLAN, Voice VLAN, Guest VLAN, GVRP and VLAN mapping. Implements STP/RSTP/MSTP, Smart‑Link and RRPP ring‑protection protocols for millisecond‑level link fail‑over recovery. Supports LACP link aggregation, IGMP Snooping v1/v2/v3, MLD Snooping, broadcast‑multicast‑unicast storm suppression and port isolation. Cooperates with central switch to realize SVF super virtual fabric, simplifying campus network architecture and reducing deployment and O&M workloads华为企业业....
3. Forwarding & Virtualization Functions

   As remote‑unit device, data traffic is centrally forwarded by matched central switch. Supports VBST compatible with PVST+ protocol, LNP link negotiation and VCMP VLAN centralized management. Cooperates with central switch to complete service configuration, access control and policy delivery, realizing lean‑mode two‑tier campus networking. MAC address table capacity follows central‑switch management.
4. Comprehensive Security Mechanism

   Supports 802.1X authentication, MAC‑based authentication, Portal authentication, AAA / RADIUS / HWTACACS access control, managed by central switch. Provides DHCP Snooping, ARP anti‑attack, DoS‑attack defense and port‑security functions. L2‑L4 ACL realizes flexible traffic filtering. Supports SSHv2 and HTTPS for secure encrypted management access.
5. Powerful QoS and Intelligent O&M Capabilities

   Multiple priority queues per port, supporting SP / WRR / WFQ queue‑scheduling algorithms. Supports port‑based rate‑limiting, two‑rate three‑color CAR, 802.1p / DSCP remarking. Provides Console port, Mini‑USB console, Web‑GUI, Telnet, SSH, SNMP v1/v2c/v3 and RMON. Compatible with eSight and iMaster NCE‑Campus network‑management platforms, supporting PNP zero‑touch deployment. Supports EEE energy‑efficient Ethernet for low‑power‑consumption operation.
6. Hardware Design

   Intelligent variable‑speed fan cooling; built‑in AC power supply. Standard 19‑inch 1U rack‑mountable chassis.

Technical Specifications

• Part Number: S5751‑L24P4S
• Switching Capacity: 128 Gbps
• Forwarding Performance: 96 Mpps
• Ports: 24 × 10/100/1000BASE‑T RJ45 PoE+; 4 × 100/1000BASE‑X GE SFP
• PoE Standard: IEEE 802.3at PoE+
• Power Input: Built‑in AC 100‑240V, 50‑60Hz
• Thermal Design: Intelligent variable‑speed fan cooling
• Dimension (H×W×D): 43.6 mm × 442 mm × 420 mm (1U rack‑mount)
• Operating Temperature: 0 °C ~ +45 °C
• Humidity: 5%‑95% non‑condensing
• Compliance: IEEE 802‑series Ethernet standards

Compatible Hardware

Note: This is S5751‑L series PoE+ remote‑unit switch for lean‑campus networking. It relies on central switch for unified forwarding and service control, supports SVF super virtual fabric, rich Layer‑2 features and complete security access‑control capability.

Application Scenarios

Short Version (For Invoice / E‑commerce Listing)