Huawei CloudEngine S6320‑16S‑SI Full English Product Description

Product Overview

Key Features

1. Port and Hardware Configuration

   16×10GE SFP+ multi‑rate optical slots support GE /10GE SFP/SFP+ transceivers for flexible all‑optical downlink access. 4×40GE QSFP+ ports serve for high‑bandwidth uplink or iStack hardware stacking connection. One independent service expansion slot supports optional sub‑cards to extend uplink or stacking capacity. It supports single‑slot modular power supply (AC or ‑48V DC power modules). Adopts fixed fan module with intelligent variable‑speed control to dynamically adjust fan speed for balancing heat dissipation and acoustic noise. PoE power supply is not supported. Standard 19‑inch 1U rack‑mount chassis for cabinet installation.
2. Rich Layer‑2 Functions

   Supports 4094 IEEE 802.1Q VLANs, MUX VLAN, Voice VLAN, Guest VLAN, GVRP and VLAN mapping. Implements STP/RSTP/MSTP, Smart‑Link, RRPP and ERPS ring‑protection protocols for millisecond‑level link fail‑over recoveryHuawei Car.... Supports LACP link aggregation, IGMP Snooping v1/v2/v3, MLD Snooping, broadcast‑multicast‑unicast storm suppression and port isolation. iStack hardware stacking merges multiple physical switches into one logical device for unified configuration and management. SVF super virtual fabric simplifies campus network architecture and reduces deployment and O&M workloads. Supports VBST protocol for inter‑operation with PVST+ compatible third‑party devices.
3. Full Layer‑3 and IPv6 Functions

   Supports static routing, RIP, OSPF, OSPFv3, VRRP, ECMP equal‑cost routing, as well as mature multicast protocols PIM‑DM, PIM‑SM, PIM‑SSM and MSDP. Complete IPv4/IPv6 dual‑stack includes ND, Ping, Tracert, IPv6 ACL and IPv6 QoS. Supports basic MPLS functions for enterprise and metropolitan‑network service bearing. MAC address table supports large‑scale forwarding capacity for campus and small‑data‑center traffic.
4. Comprehensive Security Mechanism

   Supports 802.1X authentication, MAC‑based authentication, Portal authentication, AAA / RADIUS / HWTACACS access control. Provides DHCP Snooping, ARP anti‑attack, DoS‑attack defense, BPDU protection, root‑protection and MAC‑address‑learning‑limit controlHuawei Car.... L2‑L4 ACL realizes flexible traffic filtering based on MAC, IP, port and protocol information. Supports SSHv2, HTTPS for secure encrypted management access.
5. Powerful QoS and Intelligent O&M Capabilities

   8 priority queues per port, supporting SP / WRR / DRR / SP+WRR queue‑scheduling algorithms. Supports port‑based rate‑limiting, two‑rate three‑color CAR, 802.1p / DSCP remarking and traffic shapingHuawei Car.... Provides Console port, Mini‑USB console, Web‑GUI, Telnet, SSH, SNMP v1/v2c/v3, RMON, sFlow sampling. Compatible with eSight and iMaster NCE‑Campus management platforms. Supports PNP zero‑touch deployment, VCT virtual‑cable‑test and Ethernet OAM for fault diagnosis. Supports EEE energy‑efficient Ethernet for low‑power‑consumption operation.
6. Hardware Design

   Intelligent variable‑speed fan cooling; modular power‑supply slot. Standard 19‑inch 1U rack‑mountable chassis.

Technical Specifications

• Part Number: S6320‑16S‑SI
• Switching Capacity: 800 Gbps
• Forwarding Performance: 595 Mpps
• Ports: 16 × 10GE SFP+ optical slots; 4 × 40GE QSFP+ ports; 1 × service expansion slot
• PoE: Not supported
• Power Supply: Single modular power slot, compatible with AC / ‑48V DC power modules
• Thermal Design: Intelligent variable‑speed fan cooling
• Dimension (H×W×D): 44.4 mm × 442 mm × 420 mm (1U rack‑mount)
• Operating Temperature: 0 °C ~ +45 °C
• Humidity: 5%‑95% non‑condensing
• Compliance: IEEE 802‑series Ethernet standards

Compatible Hardware

Note: This is S6320‑SI series cost‑effective all‑optical full‑Layer‑3 switch without PoE function. It supports iStack stacking, rich Layer‑2/Layer‑3 protocols, IPv4/IPv6 dual‑stack and enterprise‑grade security access‑control capability.

Application Scenarios

Short Version (For Invoice / E‑commerce Listing)