Huawei CloudEngine S6720‑30L‑HI‑24S Full English Product Description

Product Overview

Key Features

1. Port and Hardware Configuration

   24×10GE SFP+ multi‑rate optical slots support GE /10GE SFP/SFP+ transceivers, DAC high‑speed cables and AOC active optical cables. 4×40GE QSFP+ and 2×100GE QSFP28 ports support high‑bandwidth uplink and iStack hardware stacking. No independent service expansion slot. Dual hot‑swappable modular power‑supply slots support 1+1 redundancy, compatible with AC or ‑48V DC power modules. Hot‑swappable fan modules adopt front‑to‑back airflow; intelligent variable‑speed fans dynamically adjust rotation speed to balance heat dissipation and acoustic noise. PoE power supply is not supported. Both power and fan modules support hot‑swap without interrupting running services. Equipped with Console port, Mini‑USB console, ETH management port and USB 2.0 port for convenient device maintenance. Standard 19‑inch 1U rack‑mount chassis for cabinet installation.
2. Rich Layer‑2 Functions

   Supports 4094 IEEE 802.1Q VLANs, MUX VLAN, Voice VLAN, Guest VLAN, GVRP, basic & flexible QinQ and VLAN mapping. Implements STP/RSTP/MSTP, Smart‑Link, RRPP and ERPS ring‑protection protocols for millisecond‑level link fail‑over recovery. Supports LACP link aggregation, IGMP Snooping v1/v2/v3, MLD Snooping, broadcast‑multicast‑unicast storm suppression and port isolation. iStack hardware stacking combines multiple physical switches into one logical device for unified configuration and management. SVF super virtual fabric simplifies campus network architecture and reduces deployment and O&M workloads. Supports VBST protocol for seamless inter‑operation with PVST+ compatible third‑party network devices.
3. Full Layer‑3 and IPv6 Functions

   Supports static routing, RIP, OSPF, IS‑IS, BGP, OSPFv3, BGP4+, VRRP, ECMP equal‑cost routing, as well as mature multicast protocols including PIM‑DM, PIM‑SM, PIM‑SSM and MSDP. Complete IPv4/IPv6 dual‑stack capability covers ND, Ping, Tracert, IPv6 ACL and IPv6‑related tunnel technologies. Supports policy‑based routing, URPF and BFD fast detection. Delivers comprehensive MPLS functions including MPLS‑L3VPN, VPWS, VPLS, Segment‑Routing for enterprise and metropolitan‑network service bearing. Large‑capacity hardware buffer handles burst heavy traffic. MAC address table supports up to 64K entries.
4. Comprehensive Security Mechanism

   Supports 802.1X authentication, MAC‑based authentication, Portal authentication, AAA / RADIUS / HWTACACS access control. Provides DHCP Snooping, ARP anti‑attack, DoS‑attack defense, BPDU protection, root‑protection and MAC‑address‑learning‑limit control. Supports MACsec, IPsec, SSL. L2‑L4 ACL realizes flexible traffic filtering based on MAC address, IP address, port number and protocol type. Supports SSHv2 and HTTPS for secure encrypted management access.
5. Powerful QoS and Intelligent O&M Capabilities

   8 priority queues per port, supporting SP / WRR / DRR / SP+WRR queue‑scheduling algorithms. Supports port‑based rate‑limiting, two‑rate three‑color CAR, 802.1p / DSCP remarking and traffic shaping. Provides Console port, Mini‑USB console, Web‑GUI, Telnet, SSH, SNMP v1/v2c/v3, RMON, sFlow and Net‑Stream traffic sampling. Compatible with eSight and iMaster NCE‑Campus management platforms. Supports PNP zero‑touch deployment, VCT virtual‑cable‑test and Ethernet OAM for quick fault diagnosis. Supports EEE energy‑efficient Ethernet for low‑power‑consumption operation.
6. Hardware Design

   Hot‑swappable fan modules with front‑to‑back airflow; dual hot‑swap modular power‑supply slots supporting 1+1 redundancy. Standard 19‑inch 1U rack‑mountable chassis.

Technical Specifications

• Part Number: S6720‑30L‑HI‑24S
• Switching Capacity: 2.56 Tbps
• Forwarding Performance: 1260 Mpps
• RAM: 2 GB; Flash: 1 GB
• Ports: 24 × 10GE SFP+ multi‑rate optical slots; 4 × 40GE QSFP+ ports; 2 × 100GE QSFP28 ports; no service expansion slot
• PoE: Not supported
• Power Supply: Dual hot‑swap modular power slots, supports 1+1 redundancy for AC 100‑240V or ‑48V DC power modules
• Thermal Design: Hot‑swap fan modules, intelligent variable‑speed fan cooling, front‑to‑back airflow
• Dimension (H×W×D): 43.6 mm × 442.0 mm × 420.0 mm (1U rack‑mount)
• Operating Temperature: 0 °C ~ +45 °C (0‑1800 m altitude)
• Humidity: 5%‑95% non‑condensing
• Compliance: IEEE 802‑series Ethernet standards

Compatible Hardware

Note: This is S6720‑HI series high‑end full‑feature all‑optical Layer‑3 switch without PoE function. It supports iStack stacking, SVF super virtual fabric, abundant Layer‑2/Layer‑3/MPLS/Segment‑Routing features, IPv4/IPv6 dual‑stack and enterprise‑grade security access‑control capability.

Application Scenarios

Short Version (For Invoice / E‑commerce Listing)