Huawei S7706 Full English Product Description
Product Overview
Huawei S7706 is a modular smart routing switch of the S7700 series, running on Huawei VRP operating system. It adopts a 10U‑height 19‑inch rack‑mount chassis, equipped with 2 MPU main‑processing slots and 6 LPU service slots, supporting hot‑swappable main‑control boards, service interface boards, fan trays and power modules. It supports CSS cluster virtualization, SVF super virtual fabric, built‑in WLAN AC capability, rich MPLS, VXLAN‑BGP‑EVPN and H‑QoS functions. Dual‑MPU 1+1 redundancy enhances system reliability. It is widely deployed as core or aggregation node for medium‑to‑large enterprise campus, education, government and metropolitan network scenarios华为企业业....
Key Features
-
Chassis and Hardware Configuration
10U 19‑inch rack‑mount chassis. 2 slots for MPU main‑control units (1+1 redundant deployment recommended), 6 service slots for diversified LPUs (FE/GE/10GE/40GE/100GE interface cards). All key components including MPU, LPU, fan tray and power modules support hot‑swap to minimize service interruption. Power slots support AC and ‑48V DC input; PoE‑capable chassis variant is available. Console port, Mini‑USB console port, ETH management port and USB storage port are provided for device maintenance.
-
Powerful Layer‑2 Capabilities
Supports 4094 IEEE 802.1Q VLANs, MUX VLAN, Voice VLAN, Guest VLAN, GVRP, basic & flexible QinQ and VLAN mapping. Implements STP/RSTP/MSTP, Smart‑Link, RRPP, ERPS for millisecond‑level link fail‑over recovery. Supports LACP link aggregation, IGMP Snooping, MLD Snooping, broadcast‑multicast‑unicast storm suppression and port isolation. Supports SVF (Super Virtual Fabric) to virtualize core‑aggregation‑access switches and APs into one logical device for simplified O&M. Supports CSS switch cluster technology and VBST for interoperability with third‑party PVST+ devices华为企业业....
-
Comprehensive Layer‑3 & IPv6 Functions
Supports static routing, RIP, OSPF, IS‑IS, BGP, OSPFv3, BGP4+, VRRP, ECMP equal‑cost routing and complete multicast protocols including PIM‑DM, PIM‑SM, PIM‑SSM, MSDP. Full IPv4/IPv6 dual‑stack, supports policy‑based‑routing, URPF and BFD fast fault detection. Delivers full‑feature MPLS suite including MPLS‑L3VPN, VPWS, VPLS; supports VXLAN L2/L3 gateway with BGP‑EVPN for virtualized networking. Built‑in native WLAN AC function can manage up to 4096 APs without independent AC hardware华为企业业....
-
Security Mechanisms
Supports 802.1X, MAC‑based authentication, Portal authentication, AAA / RADIUS / HWTACACS access control. Provides DHCP Snooping, ARP anti‑attack, DoS attack defense, BPDU protection, root protection and MAC‑address‑learning‑limit control. Supports MACsec link‑layer encryption. L2‑L4 ACL implements flexible traffic filtering based on MAC, IP, port and protocol type. Supports SSHv2, HTTPS for secure management access.
-
QoS and Intelligent O&M
Multiple priority queues per port, supports SP / WRR / DRR / H‑QoS scheduling. Provides port‑based rate‑limiting, two‑rate three‑color CAR, 802.1p / DSCP remarking and traffic shaping. Supports NetStream, sFlow, iPCA intelligent packet‑loss detection. Compatible with eSight and iMaster NCE‑Campus management platforms. Supports zero‑touch PNP deployment, VCT virtual‑cable‑test and Ethernet OAM for fast fault diagnosis.
Technical Specifications
-
Part Number: S7706 (Chassis: ES0B00770600; PoE variant available)
-
Switching Capacity: 4.8 Tbps
-
Forwarding Performance: 3240 Mpps
-
Chassis slots: 2 × MPU slots; 6 × LPU service slots
-
Form Factor: 10U, 19‑inch rack‑mount
-
Dimension (W×D×H): 442 mm × 517.4 mm × 442 mm
-
Power: Hot‑swappable AC / ‑48V DC power modules (PoE‑version supports PoE output)
-
Operating environment: 0 °C ~ +45 °C (0‑1800 m altitude); 5%‑95% non‑condensing humidity
-
Note: Main‑control boards, service interface boards, power supplies and fan trays are sold separately. Actual performance and port density depend on installed boards.
Compatible Hardware
Diversified LPUs: FE/GE SFP, 10GE SFP+, 40GE QSFP+, 100GE QSFP28 interface cards; MPU main‑control units, hot‑swap fan trays, AC /‑48V DC power modules, optical transceivers, DAC/AOC cables and rack‑mount accessories.
Note: S7706 is a modular chassis; available features and port quantities are determined by installed MPU and LPU cards.
Application Scenarios
Medium‑large enterprise campus core or aggregation node, education campus network, government office network, metropolitan‑area‑network convergence, medium‑large data‑center aggregation scenarios requiring modular expansion, wired‑wireless convergence, high‑reliability and multi‑service bearing capability.
Short Version (For Invoice / E‑commerce Listing)
Huawei S7706, S7700‑series 10U modular smart routing switch chassis, 2 × MPU slots, 6 × LPU service slots, VRP operating system, supports CSS cluster, SVF super virtual fabric, native WLAN AC (max 4096 APs), full‑feature Layer‑2/Layer‑3, MPLS, VXLAN‑BGP‑EVPN, IPv4/IPv6 dual‑stack, hot‑swappable key components, for enterprise campus core/aggregation and MAN convergence deployment. MPU, service boards, power and fan are ordered separately.
|
