Huawei S7712 Full English Product Description
Product Overview
Huawei S7712 is a high‑end modular smart routing switch belonging to the S7700 series, running on Huawei VRP operating system. It adopts a 15U‑height 19‑inch rack‑mount chassis with 2 MPU main‑processing slots and 12 LPU service slots, plus dual CMU central monitoring units. All key components including main‑control boards, service interface boards, fan trays and power modules support hot‑swap. It supports CSS cluster virtualization, SVF Super Virtual Fabric, built‑in WLAN AC capability, comprehensive MPLS, VXLAN‑BGP‑EVPN and H‑QoS features. Dual‑MPU 1+1 redundancy delivers high system reliability. It serves as core node for large‑scale enterprise campus, education, government, finance and metropolitan‑network convergence scenarios.
Key Features
-
Chassis and Hardware Configuration
15U 19‑inch rack‑mount chassis. 2 slots for MPU main‑control units (1+1 active‑standby redundancy recommended), 12 LPU service slots for diversified interface cards (FE/GE/10GE/40GE/100GE). Equipped with 2 CMU monitoring boards, 4 fan slots, 4 system power slots and 4 PoE power slots for PoE‑capable deployment. Console port, Mini‑USB console port, ETH management port and USB storage port are available for device maintenance. All critical components support hot‑swap to minimize service interruption. Supports AC, ‑48V DC power input; PoE‑capable chassis variant is available.
-
Powerful Layer‑2 Capabilities
Supports 4094 IEEE 802.1Q VLANs, MUX VLAN, Voice VLAN, Guest VLAN, GVRP, basic & flexible QinQ and VLAN mapping. Implements STP/RSTP/MSTP, Smart‑Link, RRPP, ERPS for millisecond‑level link fail‑over recovery. Supports LACP link aggregation, IGMP Snooping, MLD Snooping, broadcast‑multicast‑unicast storm suppression and port isolation. Supports SVF (Super Virtual Fabric) to virtualize core‑aggregation‑access switches and APs into one logical device for simplified O&M. Supports CSS switch cluster technology and VBST for interoperability with third‑party PVST+ devices.
-
Comprehensive Layer‑3 & IPv6 Functions
Supports static routing, RIP, OSPF, IS‑IS, BGP, OSPFv3, BGP4+, VRRP, ECMP equal‑cost routing and complete multicast protocols including PIM‑DM, PIM‑SM, PIM‑SSM, MSDP. Full IPv4/IPv6 dual‑stack, supports policy‑based‑routing, URPF and BFD fast fault detection. Delivers full‑feature MPLS suite including MPLS‑L3VPN, VPWS, VPLS; supports VXLAN L2/L3 gateway with BGP‑EVPN for virtualized networking. Built‑in native WLAN AC function can manage up to 4096 APs without independent AC hardware华为企业业....
-
Security Mechanisms
Supports 802.1X, MAC‑based authentication, Portal authentication, AAA / RADIUS / HWTACACS access control. Provides DHCP Snooping, ARP anti‑attack, DoS attack defense, BPDU protection, root protection and MAC‑address‑learning‑limit control. Supports MACsec link‑layer encryption. L2‑L4 ACL implements flexible traffic filtering based on MAC, IP, port and protocol type. Supports SSHv2, HTTPS for secure management access.
-
QoS and Intelligent O&M
Multiple priority queues per port, supports SP / WRR / DRR / H‑QoS scheduling. Provides port‑based rate‑limiting, two‑rate three‑color CAR, 802.1p / DSCP remarking and traffic shaping. Supports NetStream, sFlow, iPCA intelligent packet‑loss detection. Compatible with eSight and iMaster NCE‑Campus management platforms. Supports zero‑touch PNP deployment, VCT virtual‑cable‑test and Ethernet OAM for fast fault diagnosis.
Technical Specifications
-
Part Number: S7712 (Chassis: ES0B00771200; PoE variant available)
-
Switching Capacity: 4.32 Tbps
-
Forwarding Performance: 3240 Mpps
-
Chassis slots: 2 × MPU slots; 12 × LPU service slots; 2 × CMU monitoring slots; 4 fan slots
-
Form Factor: 15U, 19‑inch rack‑mount
-
Dimension (W×D×H): 442 mm × 517.4 mm × 663.95 mm
-
Power: Hot‑swappable AC / ‑48V DC power modules; PoE‑version supports PoE output
-
Operating environment: 0 °C ~ +45 °C (0‑1800 m altitude); 5%‑95% non‑condensing humidity
-
Note: Main‑control boards, service interface boards, power supplies and fan trays are sold separately. Actual performance and port density depend on installed boards and software version.
Compatible Hardware
Diversified LPUs: FE/GE SFP, 10GE SFP+, 40GE QSFP+, 100GE QSFP28 interface cards; MPU main‑control units, CMU monitoring boards, hot‑swap fan trays, AC /‑48V DC power modules, optical transceivers, DAC/AOC cables and rack‑mount accessories.
Note: S7712 is a modular chassis; available features and port quantities are determined by installed MPU, CMU and LPU cards.
Application Scenarios
Large‑scale enterprise campus core node, large education campus network, government and finance core network, metropolitan‑area‑network convergence, large‑size data‑center aggregation scenarios requiring high‑density modular expansion, wired‑wireless convergence, high‑reliability and multi‑service bearing capability.
Short Version (For Invoice / E‑commerce Listing)
Huawei S7712, S7700‑series 15U modular smart routing switch chassis, 2 × MPU slots, 12 × LPU service slots, 2 × CMU monitoring slots, VRP operating system, supports CSS cluster, SVF super virtual fabric, native WLAN AC (max 4096 APs), full‑feature Layer‑2/Layer‑3, MPLS, VXLAN‑BGP‑EVPN, IPv4/IPv6 dual‑stack, hot‑swappable key components, for large‑enterprise campus core and MAN convergence deployment. MPU, service boards, CMU, power and fan are ordered separately.
|
