Huawei CloudEngine CE6885‑LL‑56F Full English Product Description
Variants:‑B (front‑to‑back airflow),‑F (back‑to‑front airflow); LL stands for Low‑Latency
Product Overview
Huawei CloudEngine CE6885‑LL‑56F is a 1U low‑latency fixed‑port leaf/TOR switch of the CloudEngine 6800 series for high‑performance cloud data‑center and HPC scenarios, running on Huawei VRP8 operating systemNetwork-Sw.... It provides 48×SFP28 downlink ports (10GE/25GE) and 8×QSFP28 uplink ports supporting 40GE/100GE with breakout capability. Optimized hardware design achieves ultra‑low forwarding latency. It supports M‑LAG multi‑chassis link aggregation, hardware‑accelerated VXLAN‑BGP‑EVPN, advanced RoCE v2 lossless Ethernet, MACsec and rich automation capabilities. It is deployed as TOR leaf node in spine‑leaf fabrics, and also suitable for high‑performance computing and all‑flash storage networking environments.
Key Features
1. Hardware & Port Configuration
19‑inch 1U rack‑mount chassis.
‑ 48 × SFP28 ports, auto‑negotiate 10GE / 25GE for high‑density server access
‑ 8 × QSFP28 uplink ports supporting 40GE / 100GE; each QSFP28 can breakout into multiple 10GE/25GE sub‑interfaces
‑ 2 hot‑swappable power slots with 1+1 redundancy (AC /‑48V DC /240V HVDC); 5 hot‑swap fan trays with N+1 fan redundancy
‑ Two airflow options:‑B for port‑side‑intake (front‑to‑back);‑F for port‑side‑exhaust (back‑to‑front), determined by matched power‑fan assemblies
‑ Maintenance interfaces: RJ45 Console, Mini‑USB Console, 1×GE out‑of‑band management port, USB storage port
‑ Hardware‑optimized for ultra‑low‑latency packet forwarding for HPC and storage scenariosNetwork-Sw...
2. Layer‑2 Capabilities
Supports up to 4K IEEE 802.1Q VLANs, MUX VLAN, basic & flexible QinQ, VLAN mapping, GVRP.
Implements STP/RSTP/MSTP, Smart‑Link, ERPS for millisecond‑level link protection.
Supports static & dynamic LACP link aggregation, E‑Trunk, M‑LAG multi‑chassis link aggregation (zero‑service‑impact independent device upgrade), SVF2.0 Super Virtual Fabric.
Supports IGMP Snooping, MLD Snooping, broadcast‑multicast‑unicast storm suppression, port isolation, LLDP, MACsec link encryption.
Maximum MAC address table capacity: 288K entries.
3. Layer‑3, IPv6 & Data‑Center Functions
Full IPv4 / IPv6 dual‑stack support.
Supports static routing, RIP, OSPF, IS‑IS, BGP, OSPFv3, BGP4+, VRRP, ECMP, hardware‑accelerated BFD fast fault detection.
Multicast suite: PIM‑DM, PIM‑SM, PIM‑SSM, MSDP.
Supports VXLAN bridging & VXLAN routing with BGP‑EVPN control plane, VXLAN OAM, policy‑based routing, URPF.
Advanced lossless Ethernet: PFC / ECN / AI‑ECN for RoCE v2, optimized for NVMe‑oF storage trafficNetwork-Sw....
Built‑in OPS open‑programmable system based on Python for custom automation scripts.
Supports ZTP zero‑touch provisioning, NETCONF, Ansible for SDN automated deployment.
4. Security Mechanisms
Supports 802.1X, MAC‑based authentication, Portal authentication, AAA / RADIUS / HWTACACS access control.
Provides DHCP Snooping, ARP anti‑spoofing, multi‑dimensional DoS attack defense, BPDU protection, root protection, MAC‑address‑learning‑limit.
L2‑L4 ACL implements flexible traffic filtering based on MAC, IP, port and protocol fields.
Supports SSHv2, HTTPS for encrypted management access; supports secure‑boot to prevent system‑image tampering.
5. QoS & Intelligent O&M
Multi‑queue QoS scheduling: SP, WRR, DRR.
Supports port‑based rate‑limiting, two‑rate three‑color CAR, 802.1p / DSCP marking & remarking, traffic shaping.
Supports NetStream, sFlow, high‑precision Telemetry real‑time telemetry, Ethernet OAM, SPAN/RSPAN/ERSPAN.
Compatible with eSight and iMaster NCE‑Fabric management platforms; supports NETCONF/YANG for SDN‑oriented automated deployment.
Technical Specifications
-
Part Number: CE6885‑LL‑56F (‑B /‑F airflow option)
-
Form Factor: 1U, 19‑inch rack‑mount
-
Ports: 48 × SFP28 (10GE/25GE); 8 × QSFP28 (40GE/100GE, breakout capable); 1×RJ45 Console; 1×Mini‑USB Console; 1×GE out‑band‑management;1×USB
-
Dimension (H×W×D): 43.6 mm ×442.0 mm ×420.0 mm
-
Switching Capacity: 2.4 Tbps
-
Forwarding Performance: 1200 Mpps
-
Power: Hot‑swappable AC /‑48V DC /240V HVDC modules, supports 1+1 redundancy
-
Fans:5 hot‑swap fan trays with N+1 redundancy
-
Operating environment:0 °C ~ +45 °C (≤1800 m altitude); 5%‑95% non‑condensing humidity
-
Note: Power and fan modules are sold separately. Actual port‑breakout capability and feature set depend on installed hardware and software version.
Compatible Hardware
SFP28 10GE/25GE optical transceivers, QSFP28 40GE/100GE transceivers, high‑speed DAC/AOC cables; hot‑swap AC / DC / HVDC power supply modules, fan trays, rack‑mounting kits.
Note: CE6885‑LL‑56F is fixed‑port switch without service‑board slots. Feature availability depends on transceivers, power‑fan variant and software release.
Application Scenarios
Ultra‑low‑latency TOR/leaf access for cloud data‑center spine‑leaf fabrics; high‑performance‑computing(HPC) cluster networking; all‑flash NVMe‑oF storage network; scenarios requiring M‑LAG, BGP‑EVPN VXLAN, RoCE v2 lossless Ethernet and zero‑touch batch deploymentNetwork-Sw....
Short Version (For Invoice / E‑commerce Listing)
Huawei CloudEngine CE6885‑LL‑56F, 1U 19‑inch rack‑mount low‑latency fixed data‑center TOR/leaf switch, 48×SFP28(10GE/25GE), 8×QSFP28(40GE/100GE with breakout), VRP8 operating system, supports M‑LAG, SVF2.0 Super Virtual Fabric, VXLAN with BGP‑EVPN, RoCE v2 lossless Ethernet, MACsec, full Layer‑2/Layer‑3 & IPv4/IPv6 dual‑stack, OPS open programmability, ZTP zero‑touch provisioning, Telemetry, hot‑swappable 1+1 redundant power & N+1 redundant fans, reversible airflow direction. Power and fan modules sold separately.
|
