Huawei CloudEngine CE9860‑4C‑EI Full English Product Description
Variants:‑B (port‑side intake airflow),‑F (port‑side exhaust airflow);‑EI denotes Enhanced‑Intelligent model
Product Overview
Huawei CloudEngine CE9860‑4C‑EI is a 4U modular high‑end core/aggregation switch of CloudEngine 9800 series, built for hyperscale cloud data‑center fabrics, AI compute clusters, high‑performance computing and financial core networks. Equipped with four full‑width service subcard slots, it supports flexible service card deployment, delivering up to32×400GE QSFP‑DD or 128×100GE QSFP28 line‑rate portswith non‑blocking hardware architecture华为企业业.... Running on Huawei VRP8 operating system, it provides 25.6 Tbps switching capacity and 8000 Mpps line‑rate L2/L3 forwarding performance with 65 MB shared packet buffer中关村在线. It supports iStack stacking, M‑LAG multi‑chassis link‑aggregation, hardware‑accelerated BGP‑EVPN VXLAN, RoCE‑v2 lossless Ethernet, iLossless intelligent congestion control, MACsec encryption and comprehensive telemetry‑based O&M capabilities. It serves as core or aggregation node for large‑scale data‑center networks and high‑end campus backbones.
Key Features
1. Hardware & Port Configuration
4U 19‑inch rack‑mount modular chassis.
‑ 4 full‑width hot‑swappable service subcard slots; maximum port density: 32×400GE QSFP‑DD or 128×100GE QSFP28, multi‑rate auto‑negotiation and breakout supported, port capacity depends on installed subcards.
‑ 4 power module slots supporting2+2 redundancy(AC /‑48V DC /240V HVDC /380V HVDC).
‑ 5 hot‑swap fan modules supporting 4+1 redundancy; two airflow options:‑B for port‑side‑intake;‑F for port‑side‑exhaust.
‑ Maintenance interfaces: RJ45 Console, Mini‑USB Console, 1×GE out‑of‑band management port, USB storage port.
‑ Hardware platform: 4‑core 2.2 GHz CPU, 16 GB DRAM, 64 GB SSD local storage; supports IEEE 1588v2 PTP high‑precision time synchronization.
2. Layer‑2 Capabilities
Supports up to 4K IEEE 802.1Q VLANs, MUX VLAN, basic & flexible QinQ, VLAN mapping, GVRP.
Implements STP/RSTP/MSTP, Smart‑Link, ERPS for millisecond‑level link protection.
Supports static & dynamic LACP link aggregation, E‑Trunk, M‑LAG multi‑chassis link‑aggregation with hitless independent device upgrade, iStack stacking (max 16 units virtualized as one logical switch), SVF2.0 Super Virtual Fabric.
Supports IGMP Snooping, MLD Snooping, broadcast‑multicast‑unicast storm suppression, port isolation, LLDP,MACsec link‑level encryption.
Maximum MAC address table capacity: 264K entries.
3. Layer‑3, IPv6 & Data‑Center Functions
Full IPv4 / IPv6 dual‑stack support.
Supports static routing, RIP, OSPF, IS‑IS, BGP, OSPFv3, BGP4+, VRRP, ECMP (max 128‑way), hardware‑accelerated BFD, DPFR, MoFRR fast reroute.
Multicast suite: PIM‑DM, PIM‑SM, PIM‑SSM, MSDP.
Supports VXLAN bridging & VXLAN routing with BGP‑EVPN control plane, VXLAN OAM, policy‑based routing, URPF, ECN‑Overlay.
Lossless‑Ethernet enhancements: RoCE‑v2, PFC deadlock prevention, iLossless intelligent congestion tuning.
Built‑in OPS open‑programmable system based on Python for custom automation scripts.
Supports ZTP zero‑touch provisioning for fast batch deployment.
4. Security Mechanisms
Supports 802.1X, MAC‑based authentication, Portal authentication, AAA / RADIUS / HWTACACS access control.
Provides DHCP Snooping, ARP anti‑spoofing, multi‑dimensional DoS attack defense, BPDU protection, root‑protection, MAC‑address‑learning‑limit.
L2‑L4 ACL implements fine‑grained traffic filtering based on MAC, IP, port and protocol fields, supports IPv4/IPv6 micro‑segmentation.
Supports SSHv2, HTTPS for encrypted management access; supports secure‑boot to prevent system‑image tampering.
5. QoS & Intelligent O&M
Multi‑queue QoS scheduling: SP, WRR, DRR, SP+WRR, SP+DRR.
Supports port‑based rate‑limiting, two‑rate three‑color CAR, 802.1p / DSCP marking & remarking, traffic shaping, WRED congestion‑avoidance.
Supports high‑precision real‑time Telemetry, NetStream, sFlow, IFIT, ERSPAN+, packet‑event loss/latency visibility, Ethernet OAM, SPAN/RSPAN/ERSPAN.
Compatible with eSight and iMaster NCE‑Fabric management platforms; supports NETCONF/YANG for SDN‑oriented automated deployment.
Technical Specifications
-
Part Number: CE9860‑4C‑EI (‑B /‑F airflow option)
-
Form Factor: 4U, 19‑inch rack‑mount modular chassis
-
Service Slots: 4 × full‑width hot‑swappable subcard slots, max 32×400GE QSFP‑DD / 128×100GE QSFP28华为企业业...
-
Management Ports: GE out‑of‑band‑management, RJ45 Console, Mini‑USB Console, USB
-
Dimension (H×W×D): 175 mm ×442 mm ×765 mm
-
Switching Capacity: 25.6 Tbps
-
Forwarding Performance: 8000 Mpps line‑rate L2/L3 forwarding
-
Packet Buffer: 65 MB shared buffer华为企业业...
-
Power: 4 power slots, supports 2+2 redundancy (AC /‑48V DC /240V HVDC /380V HVDC)
-
Fans: 5 hot‑swap fan modules with 4+1 redundancy
-
Operating environment:0 °C ~ +40 °C (0‑1800 m altitude); temperature derate 1°C per 220 m above 1800 m; 5%‑95% RH non‑condensing
-
Note: Power, fan and service subcard modules are sold separately. Actual port quantity and feature availability depend on installed subcards, optical transceivers and software version.
Compatible Hardware
CE9800‑series service subcards; QSFP‑DD / QSFP56 / QSFP28 / SFP+ optical transceivers, high‑speed DAC/AOC cables; hot‑swap power modules, fan trays, stacking cables, rack‑mounting kits.
Note: CE9860‑4C‑EI is modular chassis without fixed service ports. Port density and functions are determined by installed subcards and software license.
Application Scenarios
Modular core/aggregation‑node deployment for hyperscale cloud‑data‑center spine‑leaf fabrics; high‑end core switch for enterprise‑DC, financial and large‑size higher‑education campus networks; AI‑computing & big‑data cluster networking; distributed storage environments with RoCE‑v2 lossless traffic; scenarios requiring iStack stacking, M‑LAG, BGP‑EVPN VXLAN and zero‑touch batch deployment.
Short Version (For Invoice / E‑commerce Listing)
Huawei CloudEngine CE9860‑4C‑EI, 4U 19‑inch rack‑mount modular high‑end data‑center core/aggregation switch with 4 full‑width hot‑swappable service subcard slots (max 32×400GE QSFP‑DD / 128×100GE QSFP28), VRP8 operating system, supports iStack stacking, M‑LAG, SVF2.0 Super Virtual Fabric, VXLAN with BGP‑EVPN, RoCE‑v2 lossless Ethernet, iLossless intelligent congestion control, MACsec, 65 MB packet buffer, full Layer‑2/Layer‑3 & IPv4/IPv6 dual‑stack, OPS open programmability, ZTP zero‑touch provisioning, high‑precision Telemetry & IFIT, 2+2 redundant power, 4+1 redundant fans, reversible airflow direction. Power, fan and service subcard modules sold separately.
|
