Huawei NetEngine 40E‑X16 (NE40E‑X16) Universal Service Router Full Product Description
1. Short Overview
TheHuawei NetEngine 40E‑X16 (NE40E‑X16)is the flagship large‑capacity distributed modular universal‑service router of the NE40E‑X series, running Huawei VRP operating system. Built on CLOS distributed non‑blocking switching architecture, the 32U chassis delivers high‑density service processing with 16 LPU service slots. It targets carrier‑grade provincial‑level MAN core, large‑scale metro core, backbone edge, 5G transport core‑aggregation, super‑large enterprise WAN core and large‑scale DC‑GW scenarios华为企业业.... It provides hardware‑accelerated SR‑MPLS, SRv6, EVPN‑VXLAN and FlexE hard‑slicing capabilities. All key hardware components support hot‑swap; 1:1 MPU main‑control redundancy plus 3+1 SFU switch‑fabric redundancy achieves carrier‑grade 99.999% reliability. Cooperating with iMaster NCE‑Controller, it enables zero‑touch provisioning, Telemetry real‑time streaming and end‑to‑end service automation for large‑scale modern IP bearer networksHuawei Car....
Naming & Variant Breakdown
-
NE40E‑X16: 32U large‑size chassis, total 22 slots: 2×MPU main‑control slots (1:1 hot‑standby), 4×SFU switch‑fabric slots (3+1 redundancy), 16×LPU service slots; supports AC and ‑48V DC power supply华为企业业....
-
NE40E‑X16A: Enhanced high‑capacity iteration of X16 platform with higher per‑slot bandwidth and switching capacity华为企业业....
-
NE40E‑X3 / NE40E‑X8: Other X‑series family members; X3 for compact edge‑aggregation, X8 for mid‑tier metro‑core deployment.
-
Classic NE40E‑16: Previous‑generation platform without hardware‑accelerated SRv6 and FlexE.
Difference vs other models: NE40E‑X16 is the largest chassis of standard NE40E‑X series. Compared with NE40E‑X8, it has more service slots and higher total capacity for provincial‑level and large‑metro core scenarios. Compared with classic NE40E‑16, X‑series adopts new‑generation NP chips with hardware‑accelerated SRv6, FlexE and native Telemetry. It focuses on metro core and backbone edge, while NE80E targets national backbone core deployment.
Core Differentiators
-
32U 19‑inch rack‑mount large chassis; MPU main‑control boards, SFU switch fabric units, LPU line processing units, power modules and fan trays support hot‑swap; 1:1 MPU redundancy plus 3+1 SFU switch‑fabric redundancy to satisfy carrier‑grade high‑reliability requirements.
-
Up to12.58 Tbps bidirectional switching capacity,5760 Mpps forwarding performance, maximum 16 LPU service slots; each slot supports high‑bandwidth line‑cards, enabling mixed deployment of 400GE/100GE/25GE/10GE interfaces for smooth network evolution华为企业业....
-
Hardware‑accelerated SR‑MPLS, full‑feature SRv6 suite, EVPN‑VXLAN, FlexE hard network slicing, L2/L3 VPN and MVPN; supports PPPoE/IPoE access and CGNAT for broadband and 5G mobile service bearer华为企业业....
-
Hardware‑assisted 1588v2 PTP and Synchronous Ethernet compliant with ITU‑T G.8275.1/G.8275.2, meeting strict synchronization requirements for 5G bearer and video services.
-
Supports ISSU in‑service software upgrade, NSR/GR non‑stop routing, multi‑protocol BFD fast convergence and millisecond‑level FRR protection. Native Telemetry streaming and IP FPM performance measurement realize real‑time traffic monitoring and fast fault location for intelligent O&M.
2. Hardware Interface & Physical Specifications
Core Hardware Performance
-
Switching Capacity:12.58 Tbps (bidirectional)华为企业业...
-
Forwarding Performance:5760 Mpps华为企业业...
-
Slot allocation: Total 22 slots, including 2×MPU main‑control slots (1:1 redundancy), 4×SFU switching fabric slots (3+1 redundancy), 16×LPU service slots华为企业业...
-
Redundancy: 1:1 MPU hot‑standby; multi‑group power supply; N+1 fan tray
-
Typical power consumption: 4610 W‑7970 W (subject to actual board configuration)华为企业业...
Mechanical Parameters
-
Dimensions (W × D × H): 442 mm × 650 mm × 1420 mm (32U)华为企业业...
-
Installation: Standard IEC 19‑inch rack‑mount, requires deep standard cabinet
-
Operating environment
-
Operating temperature: 0 °C ~ +45 °C
-
Storage temperature: −40 °C ~ +70 °C
-
Relative humidity: 5%‑85% non‑condensing
-
Altitude: < 5000 m (temperature derating at high altitude)
Supported Interfaces (via LPU line cards)
-
High‑speed optical: 400GE QSFP‑DD, 100GE QSFP28, 50GE, 40GE, 25GE SFP28, 10GE LAN/WAN SFP+, GE SFP
-
Low‑rate services: FE, POS, CPOS, E1/T1
-
Management interfaces: RJ45 CON/AUX console, Mini‑USB console, out‑of‑band GE management Ethernet, USB 2.0 Host port
3. Software Feature Suite (VRP Platform)
Routing & WAN Connectivity
-
IPv4 / IPv6 dual‑stack: Static route, RIP, OSPFv2/v3, IS‑IS, BGP‑4/BGP4+, policy‑based routing(PBR), ECMP/UCMP load‑balance
-
MPLS: LDP, RSVP‑TE, SR‑MPLS, SRv6, L3VPN, VPLS, EVPN‑VXLAN, PWE3
-
Multicast: IGMPv1/v2/v3, PIM‑SM/SSM, MSDP, MBGP, MVPN
-
Access: PPPoE, IPoE, L2TP, CGNAT
Slicing & Protection
-
FlexE hard network slicing, port slicing
-
Protection suite: IP FRR, MPLS FRR, SR FRR, multi‑protocol BFD, VRRP, E‑Trunk, G.8032 ERPS ring protection, ISSU, NSR/GR
QoS & Clock Synchronization
-
QoS: Traffic policing, shaping, multi‑level H‑QoS scheduling, WRED congestion avoidance, DSCP / 802.1p marking, per‑service SLA guarantee
-
Clock: 1588v2 PTP, Synchronous Ethernet, G.8275.1 / G.8275.2
Security Features
-
ACL, URPF, anti‑DoS & attack defense
-
AAA authentication: RADIUS, HWTACACS+
-
IPsec VPN tunnel, MACsec link encryption
Management & O&M
-
Local management: CLI over CON/AUX / Mini‑USB console
-
Remote management: SSHv2, HTTPS, NETCONF, RESTCONF, SNMP v1/v2c/v3, Syslog, NTP, TWAMP
-
Intelligent automation: NCE‑driven zero‑touch provisioning, Telemetry real‑time streaming, NQA / IP FPM network quality detection
4. Typical Deployment Scenarios
-
Provincial‑level / Large‑scale Metro Core Node: Aggregates massive broadband, enterprise private‑line and mobile bearer traffic, supports large‑scale SRv6 multi‑tenant services for metropolitan networks.
-
IP Backbone Edge Gateway: Acts as service edge node for operator IP backbone, undertakes inter‑provincial traffic access and service offloading.
-
5G Transport Core‑Aggregation Gateway: Core‑aggregation node for large‑scale 5G bearer network with high‑precision time‑synchronization capability.
-
Super‑large‑enterprise WAN Core Gateway: Core router for giant government and enterprise networks, bears massive L3VPN and EVPN inter‑site services.
-
Large‑size DC‑Gateway & Carrier Peering Node: Functions as high‑capacity DC‑GW for super‑large data‑centers, supporting high‑volume north‑south forwarding, DCI interconnection and operator interconnection peering.
5. Standard Package Contents of NE40E‑X16
1 × NE40E‑X16 32U chassis
MPU main‑control boards (2 pcs for 1:1 redundancy)
SFU switching fabric units
Power‑supply modules
Fan trays
Console cable, rack‑mount accessories
Hardware installation guide and documentation
Note: LPU line cards, optical transceivers and advanced feature licenses are sold separately according to project requirements.
Software Licensing Information
NE40E‑X16 runs Huawei VRP operating system. Basic IP routing, MPLS and QoS features are included in base license. Advanced functions including large‑scale SRv6, FlexE slicing, CGNAT require additional feature licenses.
Short Commercial Catalog Summary
The Huawei NetEngine 40E‑X16 (NE40E‑X16) is a 32U flagship large‑capacity distributed modular universal‑service router of NE40E‑X series. It delivers up to 12.58 Tbps switching capacity with 16 LPU service slots, supports hardware‑accelerated SRv6/EVPN‑VXLAN, FlexE hard slicing and 1588v2 high‑precision timing. Featuring distributed CLOS forwarding architecture, full‑key‑component hot‑swap redundancy and abundant modern multi‑service capabilities, it is widely deployed in provincial‑level / large metro core, IP backbone edge, 5G transport core‑aggregation, super‑large‑enterprise WAN core and large‑size DC‑GW scenarios, complying with strict carrier‑grade reliability requirements.
|
