Huawei NetEngine 05E‑SE (NE05E‑SE) Mid‑range Service Router Full Product Description
1. Short Overview
TheHuawei NetEngine 05E‑SE (NE05E‑SE)is a compact 1U rack‑mount mid‑range service router of the NE05E series, powered by Huawei VRP platform and self‑developed ENP chip. It is equipped with built‑in 10GE uplink optical ports plus multiple GE/FE fixed interfaces and 2 PIC expansion slots for low‑rate service cards. Target scenarios include power utility sub‑station access, transportation roadside sites, financial branch gateway, government field‑site and enterprise edge POP‑site. It supports Huawei proprietary IP hard‑pipe for deterministic low‑latency dedicated‑bandwidth guarantee for critical production services, as well as IP soft‑pipe for statistical multiplexing to improve bandwidth utilization. Power modules support 1+1 redundancy for high‑reliability deployment. Cooperating with iMaster NCE‑Controller, it supports SDN‑based zero‑touch provisioning, visualized service orchestration and real‑time performance monitoring for industry IP‑MPLS bearer networks.
Naming & Variant Breakdown
-
NE05E‑SE: 1U chassis, fixed 10GE uplink ports, abundant GE/FE ports, 2 PIC service slots; supports AC and ‑48V DC power supply.
-
NE05E‑S2: Model with 4 PIC slots, richer low‑rate service expansion capability.
-
NE05E‑SF/SG/SH: Other box‑type models of NE05E family with different fixed‑port combinations for diversified edge‑access requirements.
-
NE08E‑S6: Higher‑capacity 2U model with more PIC slots for regional‑level aggregation.
-
NE20E‑S2F: NE20E‑S series, oriented for enterprise core‑aggregation scenarios.
Difference vs other models: Compared with NE05E‑S2, NE05E‑SE provides native 10GE uplink capability but fewer PIC expansion slots, more suitable for edge sites requiring high‑speed uplink with moderate low‑rate service access. Optimized for vertical‑industry field‑site edge convergence, it differs from NE20E series which targets enterprise core and aggregation layer.
Core Differentiators
-
Compact 1U 19‑inch shallow‑depth rack‑mount chassis, suitable for space‑limited equipment rooms and outdoor cabinets; supports wide‑temperature operation ranging from ‑40 °C to +65 °C, adapting to harsh field‑site environments; power modules support 1+1 redundancy, PIC cards support hot‑swap.
-
Up to24 Gbps bidirectional switching capacity,10.135 Mpps forwarding performance. Built‑in 10GE SFP+ uplink ports and multiple GE/FE ports; 2 PIC slots support flexible deployment of E1/T1 and serial low‑rate interface cards for hybrid access of high‑speed Ethernet and legacy TDM services.
-
Supports Huawei proprietary IP hard‑pipe (exclusive bandwidth for key production services) and IP soft‑pipe (statistical multiplexing for non‑critical traffic); supports IPv4/IPv6 dual‑stack, MPLS L2/L3VPN, VLL/VPLS, MVPN, GRE and IPsec VPN, meeting multi‑service convergence requirements for power, transportation, finance and government networks.
-
Supports 1588v2 PTP and Synchronous Ethernet, satisfying high‑precision time‑synchronization requirements for power grid and transportation industry production services.
-
Supports ISSU in‑service upgrade, NSF/NSR, multi‑protocol hardware‑accelerated BFD, IP FRR, MPLS FRR, VRRP and Ethernet OAM Y.1731; supports visualized O&M, one‑click service deployment and fast fault location.
2. Hardware Interface & Physical Specifications
Core Hardware Performance
-
Switching Capacity:24 Gbps (bidirectional)
-
Forwarding Performance:10.135 Mpps (IMIX)
-
Fixed interfaces: 2×10GE(SFP+), multiple GE/FE optical & electrical composite ports
-
Expansion slots: 2 PIC service slots
-
Redundancy: 1+1 power supply; hot‑swappable PIC cards
-
Typical power consumption: subject to PIC configuration
Mechanical Parameters
-
Dimensions (H × W × D):44.45 mm × 442 mm × 225.7 mm (1U)
-
Installation: IEC 19‑inch standard rack‑mount
-
Operating environment
-
Operating temperature: ‑40 °C ~ +65 °C
-
Storage temperature: −40 °C ~ +70 °C
-
Relative humidity: 5%‑85% non‑condensing
Supported Interfaces (Fixed + PIC cards)
-
High‑speed optical: 10GE SFP+, GE, FE SFP
-
Low‑rate services: E1‑75Ω/120Ω, T1, serial interfaces
-
Management interfaces: RJ45 CON/AUX console, out‑of‑band GE management Ethernet port, USB 2.0 Host port
3. Software Feature Suite (VRP Platform)
Routing & WAN Connectivity
-
IPv4 / IPv6 dual‑stack: Static route, RIP, OSPFv2/v3, IS‑IS, BGP‑4/BGP4+, policy‑based routing(PBR), ECMP load‑balance
-
MPLS: LDP, RSVP‑TE, L3VPN, VLL/VPLS, PWE3
-
Multicast: IGMPv1/v2/v3, PIM‑SM/SSM, MSDP, MVPN
-
Access features: PPPoE, IPoE, L2TP, CGNAT, GRE, IPsec VPN
Slicing & Protection
-
Protection suite: IP FRR, MPLS FRR, multi‑protocol BFD, VRRP, E‑Trunk, ISSU, NSF/NSR
-
L2 features: STP/RSTP/MSTP, QinQ, VLAN stacking, Ethernet OAM Y.1731
QoS & Clock Synchronization
-
QoS: IP hard‑pipe, IP soft‑pipe, traffic policing, shaping, multi‑level queue scheduling, WRED congestion avoidance, DSCP / 802.1p marking, NetStream
-
Clock: 1588v2 PTP, Synchronous Ethernet
Security Features
-
ACL, URPF, anti‑DoS attack defense
-
AAA authentication: RADIUS, HWTACACS+
-
IPsec VPN tunnel
Management & O&M
-
Local management: CLI over CON/AUX console
-
Remote management: SSHv2, HTTPS, NETCONF, SNMP v1/v2c/v3, Syslog, NTP
-
Intelligent O&M: NCE‑driven zero‑touch provisioning, visualized service monitoring, NQA network quality detection
4. Typical Deployment Scenarios
-
Power & Utility Sub‑station Edge Router: Edge convergence for power distribution station networks, supporting E1 low‑rate service access and IP hard‑pipe guarantee for power production services.
-
Transportation Industry Site Gateway: Deployed for highway and railway roadside sites for field‑site multi‑service convergence with 10GE uplink requirement.
-
Financial & Government Branch Gateway: Acts as branch‑site router for bank outlets and government subordinate agencies.
-
Vertical‑industry Edge POP‑site: Edge access node for energy, transportation and government IP‑MPLS networks requiring 10GE uplink.
5. Standard Package Contents of NE05E‑SE
1 × NE05E‑SE 1U chassis
Power‑supply modules
Console cable, rack‑mount accessories
Hardware installation guide and documentation
Note: PIC interface cards, optical transceivers and advanced‑feature licenses are sold separately according to project requirements.
Software Licensing Information
NE05E‑SE runs Huawei VRP operating system. Basic IP routing, MPLS and QoS functions are included in base license. Advanced features such as large‑scale VPN and CGNAT require additional feature licenses.
Short Commercial Catalog Summary
The Huawei NetEngine 05E‑SE (NE05E‑SE) is a compact 1U mid‑range service router of NE05E series. It delivers up to 24 Gbps switching capacity and 10.135 Mpps forwarding performance, equipped with native 10GE uplink ports, abundant GE/FE fixed interfaces and 2 PIC expansion slots for low‑rate TDM service access. It supports Huawei proprietary IP hard‑pipe & soft‑pipe technology, IPv4/IPv6 dual‑stack, MPLS VPN and 1588v2 time‑synchronization. Featuring compact chassis, wide‑temperature adaptability and 1+1 power redundancy, it is widely deployed for power sub‑station, transportation roadside sites, financial branch and vertical‑industry edge scenarios requiring 10GE uplink.
|
