Huawei NetEngine 08E‑S6 (NE08E‑S6) Mid‑range Service Router Full Product Description
1. Short Overview
TheHuawei NetEngine 08E‑S6 (NE08E‑S6)is a 2U rack‑mount modular mid‑range service router of the NE08E series, built on Huawei self‑developed ENP chip and VRP operating system. It adopts distributed architecture with dual main‑control slots and 6 PIC service slots for flexible interface expansion. Target deployment scenarios include regional aggregation for power‑utility networks, transportation backbone sites, energy industry convergence nodes, large‑scale financial branch aggregation and vertical‑industry IP‑MPLS regional POP‑sites. It supports Huawei proprietary IP hard‑pipe for exclusive‑bandwidth deterministic guarantee for critical production services, as well as IP soft‑pipe for statistical multiplexing to improve bandwidth utilization. Main‑control boards, power supplies and fan trays support 1+1 redundancy to achieve carrier‑grade high‑availability. Cooperating with iMaster NCE‑Controller, it supports SDN‑based zero‑touch provisioning, visualized service orchestration and real‑time performance monitoring for large‑scale industry bearer networks.
Naming & Variant Breakdown
-
NE08E‑S6: 2U chassis; 2 MPU main‑control slots, 6 PIC service slots; supports AC and ‑48V DC power supply.
-
NE08E‑S6E: Enhanced version with higher‑performance forwarding capability and native 10GE support.
-
NE05E‑S2/SE/SF: 1U box‑type edge routers for field‑site access layer.
-
NE20E‑S4/S8: NE20E‑S series, oriented for large‑enterprise core‑aggregation scenarios.
Difference vs other models: Compared with 1U NE05E series edge routers, NE08E‑S6 adopts dual‑control modular architecture with more PIC slots, supporting larger‑scale service convergence at regional aggregation nodes. Different from NE20E‑S series enterprise routers, NE08E‑S6 is optimized for vertical‑industry production bearer networks with IP hard‑pipe and abundant low‑rate TDM service access capability.
Core Differentiators
-
2U 19‑inch shallow‑depth rack‑mount chassis, suitable for standard equipment rooms and outdoor cabinets; supports wide‑temperature operation of ‑40 °C ~ +65 °C for harsh industrial environments; main‑control, power and fan trays support 1+1 redundancy; all PIC interface cards support hot‑swap.
-
Up to120 Gbps bidirectional switching capacity,60 Mpps forwarding performance. 6 PIC service slots support flexible deployment of 10GE/GE optical/electrical, POS, E1/T1 and serial low‑rate cards, realizing hybrid aggregation of high‑speed Ethernet and massive legacy TDM services.
-
Supports Huawei proprietary IP hard‑pipe (hard‑isolated exclusive bandwidth for production services) and IP soft‑pipe (statistical multiplexing for non‑critical traffic); supports IPv4/IPv6 dual‑stack, MPLS L2/L3VPN, VLL/VPLS, MVPN, GRE and IPsec VPN, satisfying multi‑service convergence requirements for power, transportation, energy and government networks.
-
Supports 1588v2 PTP, Synchronous Ethernet and E1 line‑clock, meeting high‑precision time‑synchronization requirements for power grid and transportation production services.
-
Supports ISSU in‑service upgrade, NSF/NSR, hardware‑accelerated BFD, IP FRR, MPLS FRR, VPN FRR, VRRP and Ethernet OAM Y.1731; supports visualized O&M, one‑click service deployment and fast fault location.
2. Hardware Interface & Physical Specifications
Core Hardware Performance
-
Switching Capacity:120 Gbps (bidirectional)
-
Forwarding Performance:60 Mpps (IMIX)
-
Slot allocation: 2 MPU main‑control slots, 6 PIC service slots
-
Redundancy: 1+1 main‑control; 1+1 power supply; 1+1 fan tray; hot‑swappable PIC cards
-
Typical full‑configuration power consumption: Subject to actual PIC card configuration
Mechanical Parameters
-
Dimensions (H × W × D):88.9 mm × 442 mm × 225.7 mm (2U)
-
Installation: IEC 19‑inch / ETSI standard rack‑mount
-
Operating environment
-
Operating temperature: ‑40 °C ~ +65 °C
-
Storage temperature: −40 °C ~ +70 °C
-
Relative humidity: 5%‑85% non‑condensing
Supported Interfaces (via PIC cards)
-
High‑speed optical: 10GE SFP+, GE, FE SFP, POS STM‑1/4
-
Low‑rate services: E1‑75Ω/120Ω, T1, CE1, serial interfaces
-
Management interfaces: RJ45 CON/AUX console, out‑of‑band GE management Ethernet port, USB 2.0 Host port, alarm IN/OUT, external clock interface
3. Software Feature Suite (VRP Platform)
Routing & WAN Connectivity
-
IPv4 / IPv6 dual‑stack: Static route, RIP, OSPFv2/v3, IS‑IS, BGP‑4/BGP4+, policy‑based routing(PBR), ECMP load‑balance
-
MPLS: LDP, RSVP‑TE, L3VPN, VLL/VPLS, PWE3, MPLS‑TP
-
Multicast: IGMPv1/v2/v3, PIM‑SM/SSM, MSDP, MVPN
-
Access features: PPPoE, IPoE, L2TP, CGNAT, GRE, IPsec VPN
Slicing & Protection
-
Protection suite: IP FRR, MPLS FRR, VPN FRR, multi‑protocol hardware BFD, VRRP, E‑Trunk, ISSU, NSF/NSR
-
L2 features: STP/RSTP/MSTP, QinQ, VLAN stacking, Ethernet OAM Y.1731
QoS & Clock Synchronization
-
QoS: IP hard‑pipe, IP soft‑pipe, traffic policing, shaping, multi‑level queue scheduling, WRED congestion avoidance, DSCP / 802.1p marking, NetStream
-
Clock: 1588v2 PTP, Synchronous Ethernet, E1 line‑clock
Security Features
-
ACL, URPF, anti‑DoS attack defense
-
AAA authentication: RADIUS, HWTACACS+
-
IPsec VPN tunnel
Management & O&M
-
Local management: CLI over CON/AUX console
-
Remote management: SSHv2, HTTPS, NETCONF, SNMP v1/v2c/v3, Syslog, NTP
-
Intelligent O&M: NCE‑driven zero‑touch provisioning, visualized service monitoring, NQA network quality detection
4. Typical Deployment Scenarios
-
Power‑utility Regional Aggregation Router: Regional‑level convergence node for power grid networks, aggregating massive sub‑station E1 and Ethernet services with IP hard‑pipe guarantee for production services.
-
Transportation Industry Regional Gateway: Deployed for highway and railway regional‑level sites for multi‑service aggregation of roadside edge nodes.
-
Energy & Government Regional POP‑site: Aggregation node for mine, oil‑field and government subordinate branch networks.
-
Vertical‑industry IP‑MPLS Aggregation Node: Middle‑layer convergence for large‑scale industry private networks, connecting upper‑level core and lower‑level NE05E edge routers.
5. Standard Package Contents of NE08E‑S6
1 × NE08E‑S6 2U chassis
Fan trays
Power‑supply modules
Console cable, rack‑mount accessories
Hardware installation guide and documentation
Note: Main‑control boards, PIC interface cards, optical transceivers and advanced‑feature licenses are sold separately according to project requirements.
Software Licensing Information
NE08E‑S6 runs Huawei VRP operating system. Basic IP routing, MPLS and QoS functions are included in base license. Advanced features such as large‑scale VPN and CGNAT require additional feature licenses.
Short Commercial Catalog Summary
The Huawei NetEngine 08E‑S6 (NE08E‑S6) is a modular 2U mid‑range service router of NE08E series. It delivers up to 120 Gbps switching capacity and 60 Mpps forwarding performance, with dual‑control architecture and 6 flexible PIC service slots supporting hybrid access of high‑speed Ethernet and massive TDM low‑rate services. It supports Huawei proprietary IP hard‑pipe & soft‑pipe technology, IPv4/IPv6 dual‑stack, MPLS VPN and high‑precision time‑synchronization. Featuring full‑component 1+1 redundancy, hot‑swap capability and wide‑temperature adaptability, it is widely deployed for power‑utility, transportation, energy and government vertical‑industry regional aggregation scenarios.
|
