Huawei NetEngine 5000E‑X16A (NE5000E‑X16A) Carrier‑Grade Cluster Core Router Full Product Description

1. Short Overview

Naming & Variant Breakdown

• NE5000E‑X16A: 16‑slot CLC line‑card chassis, supports 400G/1T line‑cards, works standalone or as line chassis in multi‑chassis cluster system.
• NE5000E‑20: New‑generation 20‑slot chassis with higher per‑slot bandwidth and larger capacity.
• NE5000E‑40: High‑density 40‑slot flagship chassis for ultra‑large‑scale backbone.
• NE40E series: High‑end service routers for metro aggregation and edge‑core scenarios.

Difference vs other models: NE5000E‑X16A is the predecessor of NE5000E‑20, with 16 service slots and lower per‑slot capacity. It shares the same CCC‑based cluster architecture and supports partial reuse of line‑cards. Compared with mid‑range NE40E/NE20E routers, it is positioned at backbone core rather than metro or enterprise aggregation layer.

Core Differentiators

1. Integrated cabinet‑style chassis; key components including MPU main‑control, SFU switch fabric, LPU line‑cards, power supplies and fan trays support hot‑swap. Supports ISSU in‑service upgrade, NSR non‑stop routing, and multi‑chassis cluster expansion via CCC chassis.
2. Single chassis provides16 LPU service slots, supporting 400G and 1T‑rate line‑cards, high‑density 10GE/40GE/100GE Ethernet, POS and OTN interfaces. Multi‑chassis cluster can realize petabit‑level system switching capacity to carry operator Internet, 5G bearer and large‑scale private‑line services.
3. Comprehensive service stack: IPv4/IPv6 dual‑stack, full‑feature MPLS, SR‑MPLS, SRv6, EVPN/VXLAN, L3VPN, VPLS/VLL and large‑scale multicast, satisfying backbone, DCI and cloud‑interconnection requirements.
4. Carrier‑grade high‑availability: 1+1 redundant MPU main‑control, 3+1 redundant SFU switch fabric, N+N power supply, N+1 fan tray; supports hardware‑accelerated BFD, IP/MPLS/VPN FRR to achieve sub‑50 ms fast convergence for mission‑critical backbone services.
5. Intelligent O&M capability: Telemetry streaming‑telemetry monitoring, NETCONF/YANG open interface, cooperating with iMaster NCE to realize automatic service deployment, visualized SLA monitoring and proactive fault location.

2. Hardware Interface & Physical Specifications

Core Hardware Performance

• LPU Service Slots:16 slots (CLC chassis)Alibaba
• Supported per‑line‑card rate: 400G / 1T platform
• Redundancy: 1+1 MPU main‑control; 3+1 SFU switch fabric; N+N power supply; N+1 fan tray; all boards hot‑swappable
• Cluster mode: Standalone single‑chassis, back‑to‑back dual‑chassis, multi‑chassis cluster with CCC central chassis

Mechanical Parameters

• Dimensions (H × W × D):1778 mm × 442 mm × 650 mmMade-in-Ch...
• Installation: Indoor standard equipment‑room cabinet deployment
• Operating environment
  • Operating temperature: 5 °C ~ +40 °C
  • Storage temperature: −40 °C ~ +70 °C
  • Relative humidity: 5%‑85% non‑condensing

Supported Interfaces (via LPU line‑cards)

• High‑speed Ethernet: 10GE, 40GE, 100GE
• OTN: OTU2, OTU4
• Legacy WAN: POS STM‑16/64/256
• Management interfaces: RJ45 CON/AUX console, out‑of‑band GE management Ethernet port, USB 2.0 Host port, clock synchronization interfaces (1588v2 PTP, SyncE)

3. Software Feature Suite (VRP Platform)

Routing & WAN Connectivity

• IPv4 / IPv6 dual‑stack: Static route, RIP, OSPFv2/v3, IS‑IS, BGP4/BGP4+, policy‑based routing(PBR), ECMP load‑balance
• MPLS: LDP, RSVP‑TE, SR‑MPLS, SRv6, MPLS‑TP, L3VPN, VPLS/VLL, EVPN/VXLAN
• Multicast: PIM‑SM/PIM‑SSM, MSDP, MBGP, MVPN
• Access features: GRE, IPsec VPN

Slicing & Protection

• Protection suite: IP FRR, MPLS FRR, VPN FRR, hardware‑accelerated BFD, VRRP, ISSU, NSR
• L2 features: STP/RSTP/MSTP, QinQ, VLAN stacking, Ethernet OAM Y.1731

QoS & Clock Synchronization

• QoS: Hierarchical QoS, traffic policing & shaping, multi‑level queue scheduling, WRED congestion avoidance, DSCP/802.1p marking
• Clock: 1588v2 PTP, Synchronous Ethernet

Security Features

• ACL, URPF, anti‑DoS attack defense
• AAA authentication: RADIUS, HWTACACS+
• Route‑policy security filtering

Management & O&M

• Local management: CLI over CON/AUX console
• Remote management: SSHv2, HTTPS, SNMP v1/v2c/v3, Syslog, NTP, NETCONF/YANG, Telemetry streaming telemetry
• Intelligent O&M: NCE‑driven SDN orchestration, visualized SLA monitoring, NQA network‑quality detection

4. Typical Deployment Scenarios

1. Carrier‑Grade Provincial IP Backbone Core Node: Provincial backbone node for telecom operators, bearing Internet, 5G bearer and large‑scale private‑line services.
2. Metro Network Core Node: Core node for medium‑and‑large metropolitan area networks, aggregating massive metro service traffic.
3. Medium‑Large‑Scale DCI & Gateway Node: Data‑center interconnection and international gateway for cloud‑service providers.
4. Ultra‑large‑scale Industry Private‑network Core Node: Backbone core router for energy, government and other large private networks.

5. Standard Package Contents of NE5000E‑X16A

Note: Main‑control boards, switch‑fabric boards, LPU line‑cards, optical transceivers and advanced‑feature licenses are sold separately according to project requirements.

Software Licensing Information

Short Commercial Catalog Summary