Huawei ATN 910 Full Product Description
Product Overview
The Huawei ATN 910 is a carrier‑grade 1U fixed‑form multi‑service access router for IP RAN and metropolitan network edge scenariosHuawei Car.... Built on programmable NP hardware architecture and running Huawei VRP operating system, it delivers last‑mile FMC converged service access for mobile base‑station backhaul and enterprise VIP private‑line services. It supports abundant physical interfaces, MPLS‑TP, SR‑MPLS, SRv6 and EVPN, together with high‑precision synchronous clock functions, cooperating with CX600 / NE40E series to build end‑to‑end routing‑oriented packet transport networks for 2G/3G/4G/5G mobile bearer and enterprise leased‑line servicesHuawei Car....
Key Features
-
Compact carrier‑grade hardware: 1U 19‑inch rack‑mount box‑type device, supports AC and ‑48V DC dual power input options, easy for rapid on‑site deployment in telecom rooms and outdoor cabinet environmentsHuawei Car....
-
Rich multi‑service interface capability: Supports FE, GE electrical/SFP optical ports, 10GE SFP+ uplink interfaces, and E1/T1 TDM interfaces, adapting to mixed legacy TDM and Ethernet service access requirementsFCC ID.
-
Complete packet transport & routing features: Supports MPLS‑TP, LDP, RSVP‑TE, L2VPN / L3VPN, EVPN, SR‑MPLS and SRv6 for smooth network evolution. Full Layer 2 / Layer 3 protocol stack including OSPF, IS‑IS, BGP, STP/RSTP/MSTP, VRRP and multicast protocols.
-
High‑precision timing & synchronization: Implements Synchronous Ethernet, 1588v2 PTP, G.8275.1 full‑mode timing, meeting strict clock synchronization requirements for mobile base‑station backhaul servicesHuawei Car....
-
Multi‑dimensional carrier‑grade reliability: Supports IP FRR, LDP FRR, TE FRR, PW redundancy protection, 1:1 PW APS, bit‑error triggered switch‑over. Supports hot‑swappable power modules, improving service survivability for mission‑critical bearer networksFCC ID.
-
Hierarchical QoS & traffic management: Provides DiffServ, HQoS, traffic policing, shaping and queue scheduling, implementing differentiated SLA guarantee for mobile backhaul and enterprise private‑line services.
-
Unified O&M capability: Supports NETCONF/YANG, remote management, fault alarm and performance statistics, compatible with Huawei iMaster NCE management system to lower OPEX of access‑layer packet transport networks.
Technical Specifications
-
Form Factor: 1U height, standard 19‑inch rack‑mount chassis
-
Power Supply: Support AC and ‑48V DC telecom power supply
-
Interfaces: FE, GE(RJ45/SFP), 10GE SFP+, E1/T1 (hardware dependent on sub‑models)
-
Supported Protocols: L2: 802.1Q, 802.3ad, STP/RSTP/MSTP; L3: OSPF, IS‑IS, BGP, IPv4/IPv6; MPLS‑TP, SR‑MPLS, SRv6, EVPN; Multicast; SyncE, 1588v2 PTP
-
Protection Mechanism: IP FRR, TE FRR, PW redundancy, 1:1 PW APS
-
Operating Temperature: ‑20 °C ~ +60 °C
-
Humidity: 5%‑95% non‑condensing, IP20 protection class
-
Operating System: Huawei VRP
Application Scenarios
Mainly applied for mobile base‑station backhaul access for 2G/3G/4G/5G, operator metropolitan edge multi‑service convergence, enterprise VIP leased‑line service bearing, and FMC integrated access scenarios at MAN access nodesHuawei Car....
Short Version (for BOM / quotation list)
Huawei ATN 910, Carrier‑Grade 1U Multi‑Service Access Router for IP‑RAN, 19‑inch rack‑mount, AC/‑48V DC power supply, support FE/GE/10GE/E1 interfaces, MPLS‑TP, SR‑MPLS, SRv6, EVPN, 1588v2 PTP & Synchronous Ethernet, FRR multi‑level protection, for mobile backhaul and enterprise private‑line bearer.
|
