Huawei ATN 910B Full Product Description
Product Overview
The Huawei ATN 910B is a carrier‑grade 1U fixed‑port multi‑service access router designed for IP‑RAN mobile backhaul and metropolitan private‑line service scenariosHuawei Car.... Built on programmable NP forwarding hardware and running Huawei VRP operating system, it delivers high‑density multi‑service access for 2G/3G/4G/5G base‑station backhaul, enterprise VIP leased‑lines and FMC converged services. Multiple sub‑models provide flexible combinations of FE/GE electrical, GE SFP, 10GE SFP+/XFP and E1 TDM interfaces. Equipped with enhanced high‑precision timing capabilities, it cooperates with Huawei NE40E/CX600 series to build end‑to‑end packet transport networks for operator access‑layer sitesHuawei Car....
Key Features
-
Compact carrier‑grade hardware platform: Standard 1U 19‑inch rack‑mount form factor, supports AC and ‑48V DC power supply with 1+1 redundant DC power option, suitable for telecom equipment rooms and outdoor cabinet deploymentHuawei Car....
-
Abundant multi‑service interface options: Different variants support FE/GE RJ45, FE/GE SFP optical, 10GE SFP+/XFP uplinks and E1 TDM ports, supporting coexistence of legacy TDM and modern Ethernet servicesHuawei Car....
-
Complete packet transport and routing stack: Supports MPLS‑TP, LDP, RSVP‑TE, L2VPN / L3VPN, VLL, VPLS, EVPN, SR‑MPLS and SRv6. Full Layer‑2/Layer‑3 protocol suite including OSPF, IS‑IS, BGP, IPv4/IPv6 dual‑stack, MSTP, RRPP and multicast protocols for smooth network evolutionHuawei Car....
-
Enhanced high‑precision synchronization: Supports Synchronous Ethernet, 1588v2 PTP, G.8275.1 full‑mode timing and 1588 ACR, meeting strict clock synchronization requirements for mobile base‑station backhaul servicesHuawei Car....
-
Multi‑level carrier‑grade service protection: IP FRR, LDP FRR, TE FRR, PW redundancy and 1:1 PW APS protection. Fast service switch‑over ensures non‑stop forwarding for mission‑critical bearer trafficFCC ID.
-
Hierarchical QoS traffic management: Supports DiffServ, HQoS, traffic policing, shaping and multi‑queue scheduling, providing differentiated SLA guarantee for mobile backhaul and enterprise private‑line services.
-
Unified intelligent O&M: Supports NETCONF/YANG, remote device management, performance statistics and fault alarms, compatible with iMaster NCE for large‑scale automated deployment and maintenance of access‑layer packet transport devicesHuawei Car....
Technical Specifications
-
Form Factor: 1U height, 19‑inch standard rack‑mount chassisHuawei Car...
-
Switching Capacity: 88 Gbit/s for ATN 910B‑A/B; 128 Gbit/s for ATN 910B‑D/E variants
-
Power Supply: 100‑240V AC or ‑48V DC telecom power, supports 1+1 DC power redundancyHuawei Car...
-
Interfaces (model‑dependent): FE/GE RJ45, FE/GE SFP, 10GE SFP+/XFP, E1/T1 TDM portsHuawei Car...
-
Supported Protocols: L2: 802.1Q, 802.3ad, STP/RSTP/MSTP, RRPP; L3: OSPF, IS‑IS, BGP, IPv4/IPv6; MPLS‑TP, SR‑MPLS, SRv6, EVPN; SyncE, 1588v2 PTP series protocolsHuawei Car...
-
Protection Mechanism: IP FRR, TE FRR, PW redundancy, 1:1 PW APS
-
Operating Environment: ‑20 °C ~ +60 °C, relative humidity 5%‑95% non‑condensing, IP20 protection rating
-
Operating System: Huawei VRP
Application Scenarios
Primarily deployed for mobile base‑station backhaul access for 2G/3G/4G/5G, operator metropolitan access‑layer multi‑service convergence, enterprise VIP leased‑line bearer and FMC converged service scenarios at MAN edge nodesHuawei Car....
Short Version (for BOM / quotation list)
Huawei ATN 910B, Carrier‑Grade 1U Multi‑Service Access Router for IP‑RAN, 19‑inch rack‑mount, AC/‑48V DC power supply, support FE/GE/10GE/E1 multi‑service interfaces, MPLS‑TP, SR‑MPLS, SRv6, EVPN, 1588v2 & Synchronous Ethernet, multi‑level FRR protection, for mobile backhaul and enterprise private‑line service bearer.
|
