Huawei ATN 980 Full Product Description
Product Overview
The Huawei ATN 980 is a high‑performance carrier‑grade modular access‑aggregation router built for 5G‑oriented IP‑RAN packet transport networksHuawei Car.... Based on programmable NP forwarding hardware and running Huawei VRP operating system, it delivers large‑capacity multi‑service convergence for mobile backhaul and metropolitan leased‑line services. With maximum switching capacity up to 800 Gbit/s, it supports high‑speed interfaces of 100GE, 50GE, 25GE alongside traditional 10GE, GE, FE, CPOS‑155M and E1/T1 portsHuawei Car.... It integrates FlexE hard slicing, SR‑MPLS, SRv6 and EVPN, together with industry‑grade high‑precision timing synchronization. Cooperating with NetEngine 8000 and NE40E core routers, it builds end‑to‑end bearer networks for 2G/3G/4G/5G base‑station backhaul, large‑scale enterprise VIP leased‑lines and FMC converged servicesHuawei Car....
Key Features
-
Carrier‑grade modular hardware reliability: Standard rack‑mount modular chassis, supports 1+1 hot‑swappable main‑control redundancy and 1+1 redundant ‑48V DC power modules. Service boards, power supplies and fan trays are hot‑swappable, ensuring non‑stop forwarding for mission‑critical operator bearer networks.
-
Rich multi‑rate flexible interface expansion: Supports diversified service cards for E1/T1, CPOS‑155M, FE, GE, 10GE SFP+, 25GE SFP28, 50GE and 100GE QSFP28 interfaces, realizing coexistence of legacy TDM services and high‑bandwidth 5G‑era Ethernet bearer trafficHuawei Car....
-
Complete 5G‑optimized transport protocol stack: Natively supports MPLS‑TP, LDP, RSVP‑TE, VLL, VPLS, L2VPN/L3VPN, EVPN, SR‑MPLS and SRv6. Full Layer2/Layer3 protocol suite includes OSPF, IS‑IS, BGP, IPv4/IPv6 dual‑stack, MSTP, RRPP and multicast protocols. Built‑in FlexE flexible Ethernet hard‑slicing provides physical‑level service isolation and fine‑grained bandwidth allocation for network slicing scenarios.
-
High‑precision synchronization for 5G bearer: Supports Synchronous Ethernet, full‑mode IEEE 1588v2 PTP (OC/BC/TC), G.8275.1 and ACR adaptive clock recovery, meeting strict frequency and time‑synchronization requirements for 5G base‑station backhaul.
-
Sub‑50ms fast protection & hardware‑accelerated OAM: Supports IP FRR, LDP FRR, TE FRR, PW redundancy and 1:1 PW APS protection. Hardware‑accelerated OAM handles Y.1731, BFD, TWAMP and RFC2544 for rapid fault detection and end‑to‑end service performance monitoring.
-
Advanced hierarchical QoS traffic management: Implements three‑level HQoS, traffic policing, shaping and multi‑queue scheduling, delivering strict SLA guarantee for aggregated mobile backhaul and high‑value enterprise private‑line services.
-
Intelligent automated O&M capability: Supports NETCONF/YANG, Telemetry streaming telemetry, remote batch configuration deployment, performance statistics and fault alarms. Fully compatible with Huawei iMaster NCE management platform to lower OPEX for metropolitan‑scale packet transport networks.
Technical Specifications
-
Form Factor: Modular rack‑mount chassis for 19‑inch standard cabinet
-
Switching Capacity: Up to 800 Gbit/sHuawei Car...
-
Power Supply: Telecom ‑48V DC power input, supports 1+1 PIU power redundancy
-
Redundancy: 1+1 hot‑swappable main‑control units, redundant fan trays and power supplies; hot‑swappable service line‑cards
-
Supported Interfaces (board‑dependent): E1/T1, CPOS‑155M, FE, GE, 10GE SFP+, 25GE SFP28, 50GE, 100GE QSFP28Huawei Car...
-
Supported Protocols: L2:802.1Q, 802.3ad, MSTP, RRPP; L3: OSPF, IS‑IS, BGP, IPv4/IPv6 dual‑stack; MPLS‑TP, SR‑MPLS, SRv6, EVPN, FlexE; SyncE, full‑mode 1588v2 PTP; Y.1731, BFD
-
Protection Mechanism: IP FRR, TE FRR, PW redundancy, 1:1 PW APS
-
Operating Environment: ‑20 °C ~ +60 °C, relative humidity 5%‑95% non‑condensing, IP20 protection rating
-
Operating System: Huawei VRP
Application Scenarios
Primarily deployed as access‑aggregation nodes for 2G/3G/4G/5G mobile base‑station backhaul, metropolitan multi‑service convergence, large‑scale enterprise VIP leased‑line aggregation and FMC converged services. Ideal for operator IP‑RAN networks requiring large‑bandwidth interfaces, FlexE hard‑isolation slicing and carrier‑grade reliabilityHuawei Car...。
Short Version (for BOM / quotation list)
Huawei ATN 980, Carrier‑Grade Modular Access‑Aggregation Router for 5G IP‑RAN, 19‑inch rack‑mount chassis, max 800G switching capacity, 1+1 redundant main‑control & DC power modules, support E1/GE/10GE/25GE/50GE/100GE multi‑service interfaces, SR‑MPLS, SRv6, EVPN, FlexE hard slicing, full‑mode 1588v2 & Synchronous Ethernet, sub‑50ms FRR protection, hardware OAM, for mobile backhaul and large‑scale enterprise private‑line aggregation.
|
